Your problem with the gearshifter in the backwards gears (2nd and 4th) are probably solved by switching to 6 cylinder gearlevers. Had the same thing after a 4 to 6 cylinder swap...
Ik heb deze ook, maar de borgring aan de onderkant houdt hem niet naar beneden. Ik trek hem nu regelmatig eruit en dan moet ik hem er onderweg weer terug inslaan. Enig idee hoe ik hem kan borgen?
Dat is raar is die ring dan te smal dat je hem er doorheen trekt zit mij mij gewoon goed geen problemen mee ervaren. 🤷 eventueel een dikkere borgring erop. Of het geultje waar het invalt even (heel klein beetje) uitvijlen dat die snap ring en dieper in zit. Geen idee. Beetje prutsen maar. 1 voordeel je hebt em er zo uit om te kijken.
There is a circle of white clips 2 of them are different with little tabs opposite off each other jam pliers in there and twist it 90' degrees. It should come out. It a little bitch to get out sometimes tho.
Awesome video man! I just cannot get the C clip on the bottom no matter how many times I've tried, any tips on how to do it? I have the straight circlip pliers and all
Break them if you don't want to use it again. Just make sure you don't damage the aluminum holder. But you can break them all out and it should come right out .
@@theslidingdutchman Well okay that‘s reasuring, thanks for the quick response. I was kinda suprised how heavy it is to engage from 2nd to 3rd and from 4th to 5th gear.
@@willdossett2387 the red base? Not the oem one? In that case it just a little bit stuck, there like a snap ring on the bottom of the short shifter one. If that is off start hitting it upwards 🤷♂️
Your English is incredibly good. I thought you were American at first.
Thnx bro.
I was wondering why you had sedan window buttons on the center console, didnt realize you relocated cause of handbrake lmao
No those are at the side of the passenger, I've got electric windows in the rear aswell.
Thanks bro, Installing it now with your help
Your problem with the gearshifter in the backwards gears (2nd and 4th) are probably solved by switching to 6 cylinder gearlevers. Had the same thing after a 4 to 6 cylinder swap...
I would suggest to buy a headmount for your phone 😁
yep i've got one for my go pro but the mic quality is shit. need to sort out something for future video's thnx for the feedback
Bro took out the heat protection
Its fine bro. Been running it eversince
Ik heb deze ook, maar de borgring aan de onderkant houdt hem niet naar beneden. Ik trek hem nu regelmatig eruit en dan moet ik hem er onderweg weer terug inslaan. Enig idee hoe ik hem kan borgen?
Dat is raar is die ring dan te smal dat je hem er doorheen trekt zit mij mij gewoon goed geen problemen mee ervaren. 🤷 eventueel een dikkere borgring erop. Of het geultje waar het invalt even (heel klein beetje) uitvijlen dat die snap ring en dieper in zit. Geen idee. Beetje prutsen maar. 1 voordeel je hebt em er zo uit om te kijken.
i got the rod at the bottom disconnected so the shifter is now a floppy mess but how do i get the rod out of the hole. it just doesn’t wanna come out…
There is a circle of white clips 2 of them are different with little tabs opposite off each other jam pliers in there and twist it 90' degrees. It should come out. It a little bitch to get out sometimes tho.
Last time at a friend we just banged and broke the white ring so it just comes out. Since the whole piece will be replaced anyway.
Awesome video man! I just cannot get the C clip on the bottom no matter how many times I've tried, any tips on how to do it? I have the straight circlip pliers and all
Yeah it's not a ideal position. I was struggling aswell but it worked at the end. Death things never win bro. Put a little more anger in it.
Same :/ been trying to sand the red bit down enough
Youll need the bend circlip pliers i have the straight ones and its not easy without bending the clip
Nice. Thanks for vid m8! :D
I turned the plastic on top but it won’t come off. Any tips?
Break them if you don't want to use it again. Just make sure you don't damage the aluminum holder. But you can break them all out and it should come right out .
I just did change my shifter, however the gears go in pretty heavly is that normal, or did I do something wrong?
It a bit stiffer/ more notchy as oem. Yes that's normal. Also the factory one was a lot stiffer when it was new. It will wear in.
@@theslidingdutchman Well okay that‘s reasuring, thanks for the quick response. I was kinda suprised how heavy it is to engage from 2nd to 3rd and from 4th to 5th gear.
mine vibrates a lot when n neutral is it nomal ?
Depends on the rubbers and bushings of your gearbox and engine. Maybe give them a check up.
It is such a struggle to put that snap ring on... I can't do it. Anyone have tips or tricks?
Special pliers. Some patients, and room to work. It's extra hard when you don't have the space underneath. But yeah it's a bit of a bitch to get in
Done mine on e30, but not as smooth as your, big crunch noise each gear change and totally solid
Thats weird. Maybe different on a e30?
@@theslidingdutchman not sure but totaly solid on each gear....
@@alejaz8403 mine is the same did u keep it?
My mechanic is really piss...ed off and swearing...,🤣 He cannot insert the circlip
It's a bitch tho that clip
@@theslidingdutchman he just gave up for the day .... trying again tomorrow,🙄🙄😁
Its easy lul
@@El_Jajo I got rid of that shifter and got a E60 short shifter.... beautiful ❤️❤️
Mine had a lot of slop in the bearing area
This one feels tight. No play in it yet.
Replace your shifter bushings lol, you shouldnt do an aftermarket shifter if you're not gonna replace all the bushings
Does it go in reverse ok?
Yes. No problems with it so far
@@theslidingdutchman still good?
@@theepicmole4164 yea it works like a charm
Any tips on how to remove I have the exact same but I can’t get it out after the pin
Have you turned the plastic on top 90 degree. Like I did in the video.
@@theslidingdutchman yes I have now it’s just the red base stuck in there
@@willdossett2387 the red base? Not the oem one? In that case it just a little bit stuck, there like a snap ring on the bottom of the short shifter one. If that is off start hitting it upwards 🤷♂️
Hoi waar kunnen we deze kopen..
Ebay/aliexpress. Internet staat er vol mee. E36 short shifter
👌🏼
Wazzup kev...
is this the fidanza short throw?
Nope just the 10 euro ali express special. 🤣
how can i find it for mine??
Just Google e36 short shifter. You can't miss it.