How To Build Your First Surfboard
HTML-код
- Опубликовано: 8 сен 2024
- For more detailed instructions go to surfersteve.com
CHAPTER START TIMES:
INTRODUCTION - 00
TEMPLATES - :13
RACKS - 4:55
POLYSTYRENE - 7:56
SHAPING - 16:53
ROCKER/BENDING - 58:16
LAMINATING BOTTOM - 47:18
BENDING - 58:16
LAMINATING TOP - 103:43
FINS - 109:46
SANDING - 120:18
HOTCOAT BOTTOM - 1:23:45
HOTCOAT TOP - 1:26:41
HOTCOAT SANDING - 1:27:50
LEASH PLUG - 1:35:35
Very informative. Probably the most in depth shaping video I'v seen. Thank you!
A tip for first time laminators, you want to keep a puddle of resin in front of your squeegee as you drag it across the cloth or you will shift your cloth on the board as well. Once you shift the cloths its very difficult to get it back to where it was without moving the rest of the cloth out of place. you want to lay out your cloth and leave it exactly there and in the perfect spot before you start laminating and try your best TO NOT MOVE THE CLOTH
Didn't want to build a board but this man is amazingly talented to show us the ol skool way of shaping and building a board. Its fascinating what people improvise with.
Great instruction!!! Down to earth and very informative. Here I go......time to shape my own surfboard! Thank you!!
awesome!!! it's so incredible to see good and knowing people like you, doing all of this, just to share all this knowledge... Kudos to you!!
Thank you so much steve I'm going to use this for my personal project in school can't wait :D
Extremely helpful. Thanks!
awesome video!! very instructive and practical!
You could use solarez resin. I recommend polyesture because it can be on the foam. And it cures/ hardens from UV light so u can take as long as you want. And there's no mixing unless you want to add catalyst or pigment.
Man, whats up with those fat round rails at the tail? How does that thing turn, if at all?
Happy Birthday Dad.
very well done. very helpful. thanks.
yehhhh...feel around for that box hole and determine where that glorious center is....Ha!
Thanks Steve!
감사합니다~! 재미있게 잘 봤어요!
If I hope subtitles~!
what about stringers
Equivalent of Crushing on stage and a mic 🎤 drop @ 29:55-30:00 😂
if possible could you show us how to do carbon fiber rails
So are you leaving a lot of excess on or are you squeezing all the excess off?
I got 3 minutes of time to work my resin before it hardened the first time, and it's safe to say I f#%$ed it
is this the way to do removable fins or are they permanently stuck in?
Is it you,that once where "Kong"?
thank you .
would you please caption ?
how much would this project cost?
$200-400
anyone know where I can get xps foam?
Who is the broad in the bikini?
oh, yeh, so, I think some reference to her is mentioned between 3:05-3:20...lolzzz!