I make a tractor

Поделиться
HTML-код
  • Опубликовано: 12 янв 2025

Комментарии • 137

  • @stubby7934
    @stubby7934 Месяц назад +22

    Diesel mobility scooter. Love it.

  • @iplaymytele
    @iplaymytele 8 дней назад +1

    The picture in your thumbnail is considerably different than what you ended up with…..!
    😹😹👍🏻

    • @HTN_Vegetable
      @HTN_Vegetable  7 дней назад +1

      Haha, thank you for noticing this detail! 😄 It's true that sometimes the thumbnail may be slightly different from the image in the video, but that's usually a way to attract attention and attract viewers. I will try to improve and ensure that everything in the video accurately reflects what is shown in the thumbnail. Thank you for your feedback, and hope you will continue to watch the next videos!

  • @maihoang6179
    @maihoang6179 Месяц назад +4

    Xe này dài chở tre chở luồn thì quá hay nhỉ anh bạn, nếu thêm cái phanh cho bánh sau nữa an toàn luôn và bạn có thể kéo rộng hai bánh trước nữa sẽ cân bằng hơn.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for sharing your great ideas! 😊 It's true that if the vehicle was longer to carry bamboo or bamboo, it would be very useful. As for adding brakes to the rear wheels and widening the front wheels, that's a great idea to increase stability and safety. I will consider improving these points in future versions to make the car operate more efficiently. Thank you for your valuable comments!

  • @mdarifhasan4792
    @mdarifhasan4792 28 дней назад

    good idea 😮😮

  • @Mr.ky89
    @Mr.ky89 Месяц назад +55

    The idea of a tractor being used as a rudimentary vehicle to pull goods is unique and wonderful.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +9

      Sure, using a tractor as a cargo tow vehicle is a great way to take advantage of the available power. I also like to experiment with such unique ideas. Thank you for sharing your support and I hope my projects continue to bring you lots of fun! 🚜

    • @TheBuiXuan-jt3ih
      @TheBuiXuan-jt3ih Месяц назад

      Moóc dài quá. Chế cả cày ruộng thì ngon

  • @zona-01-na-...
    @zona-01-na-... Месяц назад +1

    👍👍👍💪💪🤝bravo.

  • @RanjitSingh-h8b
    @RanjitSingh-h8b Месяц назад +2

    Good work 👍

  • @idrissiyassine9189
    @idrissiyassine9189 26 дней назад

    YOU MUST CREAT A SOCIETY OF THIS.

    • @HTN_Vegetable
      @HTN_Vegetable  26 дней назад

      Wow, this compliment makes me very motivated! 😊 It's true that with these small creations, I hope to inspire together to create a creative, united and full of great ideas community. Thank you for your support!

  • @dmitryvasylyk2435
    @dmitryvasylyk2435 13 дней назад

    Мастеер на все руки! И редуктор моста сохранил, наверное будет продолжение? Спасибо за видео и удачи!

    • @HTN_Vegetable
      @HTN_Vegetable  11 дней назад

      Thank you very much for the compliment! 😊 I'm glad you like the video and the improvements in the projects! Keeping the crane gearbox as is is an interesting choice and there will certainly be more to explore in the sequel. I will continue to experiment and create more unique cars. I hope you will follow and continue to support! Wishing you good luck and constant creativity!

  • @ทนคลล้ํา
    @ทนคลล้ํา Месяц назад +4

    สุดยอดๆๆ😮😮

  • @jirihofirek8491
    @jirihofirek8491 Месяц назад

    Very good 👍

  • @jasmanicandra1622
    @jasmanicandra1622 Месяц назад +1

    Wah mantap nich, saya salut sekali atas kreatifitasnya ,salam dari Blora Jateng.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you very much! 🙏 I really appreciate your compliments and support. Greetings from Blora, Central Java is awesome! 🌍 Let's continue to create and learn together!

  • @speedfreak8200
    @speedfreak8200 Месяц назад

    You deserve a big pat on the back. The ppl who criticize your fine work have nothing to show. You don't need a fat front tire as the weight is over the rear drive tires. It would also be harder to turn. Greetings from Oregon U.S.A. I just subbed your great channel 👍

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you so much from Oregon, USA! I really appreciate your support and wonderful words of encouragement! 🙌 You're right, there is a technical reason for designing a smaller front tire - to reduce weight and make it easier to turn, especially when the main weight is on the driving rear tire. 🚗💡
      Welcome to my channel, hope you enjoy the upcoming projects. If you have any comments or ideas, don't hesitate to share!

  • @alexandryaruskin7072
    @alexandryaruskin7072 Месяц назад +3

    😅. Братан, сделай полноценный трактор с 4 колесами. Надо удлинить раму, мотор переставить вперёд. Редуктор, коробку передач, наклонить вперёд на 90°, привод ремнём длиннее. Сиденье над задними колесами.
    А так для такого мотоблока продается кит-набор для переделки в трактор.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Your ideas are great! 🚜💡 Building a complete 4-wheel tractor will help increase stability and operability, especially when pulling heavy objects or when moving on difficult terrain. Lengthening the frame and moving the engine forward would certainly help with better balance and weight distribution. I'll try researching these and other modifications further. Thank you for sharing this great idea! If you have any additional tips or solutions, please share with me! 🌟🚜"

    • @alexandryaruskin7072
      @alexandryaruskin7072 Месяц назад

      @HTN_Vegetable если сложно с рулевым редуктором, поворотными цапфами, тягами то можно саму переднюю ось сделать поворотным. Как если садовую тележку приладить. Будет переломной рамой.

  • @josecerqueiracolinas2115
    @josecerqueiracolinas2115 Месяц назад

    Great idea,🙏look for you Sir,🍀🇵🇹👍from Portugal

  • @mbahgandung4131
    @mbahgandung4131 Месяц назад

    Very creative, it can be used to transport goods. Good luck with your work.👍👍👍❤❤❤

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you very much for your encouragement! Turning this car into a means of transporting goods is a great idea. I will try to develop more for more practical applications. Wishing you always be creative and have interesting projects! 🚛

  • @omarchammaa4555
    @omarchammaa4555 Месяц назад +1

    👏👏👏👏 . Good job and good idea and best wishes for your life . Beautiful working and you are professional in Mechanical engineering.👍👍👍👍

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +1

      "Thank you so much for your wonderful words of encouragement! 😊 It's nice that you appreciate my work. I'm still learning and improving every day, and this compliment really motivates me Work harder. Wishing you success and all the good things in life!

  • @АлександрБуглов-э5я
    @АлександрБуглов-э5я Месяц назад +4

    Молодец отличная работа! Мне понравилось!

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you very much! 😊 Glad you like it! I will continue to work and improve, hoping to bring more interesting videos. Thank you for your support, and hope you will continue to follow!

  • @PaulPursley
    @PaulPursley Месяц назад +12

    Hello my friend, I'm loving this already, man you have done a great job 👏 👍 on this tractor. Keep up the good work and this is a great idea. Stay creative. 😊😊😊😊

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +2

      Hello! 😊 Thank you so much for your compliments and encouragement! I'm glad you like my tractor and my idea. Sharing and receiving positive feedback like this is truly a great source of motivation! 🚜💪
      I will continue to create and improve more projects, hoping to bring many useful values ​​to the community. Thank you for your continued companionship and encouragement. Together we will continue to explore and learn many interesting things! 🌟🚀"

  • @rahmadwahyudi7039
    @rahmadwahyudi7039 Месяц назад +1

    👍👍👍👍👍👍👍👍❤️❤️❤️❤️❤️❤️

  • @ВикторКрыжановский-е8ю

    Зразу помітно що руки ростуть з відки треба ❤

  • @KevideoKere-i4i
    @KevideoKere-i4i Месяц назад +1

    Good

  • @sofianishak641
    @sofianishak641 Месяц назад +3

    This engine caused death to my neigbor 40 years ago because not having clutch. When in reverse gear against a wall the driver is crushed. Be careful ya !

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for sharing this unfortunate story. 🙏 I'm so sorry to hear about the accident that happened, and it really is an important reminder to always put safety first. 🛠️
      In my projects, I always try to design the vehicle so that it has full safety measures, including a clutch and good control features when operating.
      Thank you for the reminder

  • @francoisjubault4539
    @francoisjubault4539 Месяц назад +2

    Est ce évident d'utiliser la propulsion directement sur la remorque ?

    • @francoisjubault4539
      @francoisjubault4539 Месяц назад

      Sans aucun moteur

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +1

      That's right, using direct thrust on the trailer is a very effective way to ensure the vehicle can move strongly and stably! Thank you for sharing your thoughts, together we can learn and improve more! 🌟"

    • @francoisjubault4539
      @francoisjubault4539 Месяц назад

      ​@@HTN_Vegetableregarder sur youtube "imbécile clio" c'est impressionnant

    • @francoisjubault4539
      @francoisjubault4539 Месяц назад

      ​@@HTN_Vegetable😊

  • @Miu1000N
    @Miu1000N Месяц назад +1

    Sáng tạo quá chúc anh vùi vẻ cuộc chế tạo

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      "Thank you very much! 😊 Your support is a great motivation for me to continue being creative. Wishing you happiness and success in all your projects! 🚀🔧"

  • @usmanusman9558
    @usmanusman9558 Месяц назад

    Ilmunya sangat berguna bosku semoga sukses selalu 💪💪💪💪

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Hello! 😊 Thank you so much for the compliment! I'm happy that my knowledge can help you. Feedback like this is always a great source of motivation for me to continue creating and sharing more ideas.

    • @usmanusman9558
      @usmanusman9558 Месяц назад

      @HTN_Vegetable 👍👍👍👍💪💪💪💪💪

  • @hoannguyenhuy1551
    @hoannguyenhuy1551 Месяц назад +2

    Dây ga nên làm ở tay ga xe máy.
    Khi chạy ga sẽ ổn định hơn.
    Và chủ động về đường ga khi chạy hơn.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +1

      Thank you for your comments on my video. Please support my next projects

  • @hanamotor92
    @hanamotor92 26 дней назад

    Sangat kereatip luar biasa

    • @HTN_Vegetable
      @HTN_Vegetable  26 дней назад

      Thank you very much! 😄 Your support is the source of motivation for me to continue to create and improve further. Follow along to discover more new ideas!

  • @camden7488
    @camden7488 Месяц назад

    Cool. What can it lift?

  • @松下-s5u
    @松下-s5u Месяц назад

    すごいです🎉🎉

  • @KimuraOscarYasuichi
    @KimuraOscarYasuichi Месяц назад +6

    Essa gambiarra ganhou do brasileiro!!!!!!

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Haha, it's true that sometimes gambiarra can 'beat' everyone a bit, but sometimes it's these creative solutions that bring unexpected results! 😄 I'm always looking to improve and experiment, and thank you for sharing your opinion. Let's learn together!

  • @йййр-й9ш
    @йййр-й9ш Месяц назад +2

    Я 3 года назад такой сделал.
    Шкиф замени будит тебе 30-35 км в час ехать.
    Откуда берешь металл?
    Свалка, соседи, покупаешь?
    На самоделках зарабатываешь или ютуб доход?

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +2

      Thank you for your interest! 😄 Replacing pulleys is such a fun way to upgrade speed! I always try to use recycled materials or make use of what is available, usually I get it from scrap yards or sometimes from kind neighbors. I have to buy some rare parts, but usually the priority is to save as much as possible.
      In terms of income, I mainly focus on sharing my passion on RUclips. However, the greatest joy is still creating and connecting with passionate people like you! 🚴‍♂️

  • @truvang4087
    @truvang4087 Месяц назад +6

    Mình cũng có bộ máy cày như của bạn và cũng chế thành ba bánh như của bạn, nhưng mình không biết chế phanh và cần số nên không dám đi. xuống dốc là sợ rồi. đành bỏ dở. Mình thấy bạn chế rất hay mình rất thích

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +3

      Oh, it's great that you've built such a three-wheel plow set! 🚜🚴‍♂️ I'm so happy to hear you like what I do!
      As for the brakes and gear lever, these are truly big challenges when building a trailer. But don't worry, there are many simple ways to improve these details. For example, you can try using mechanical brakes with a cable system or use disc brakes from old cars to install. As for the gear lever, you might want to try making a manual shift lever mechanism that easily fits into the existing transmission.
      I believe you can absolutely do it! If you need more ideas or guidance, I'm always ready to share my experiences. Don't give up, your car will definitely be great when completed! 🌟💪"

  • @SyaifulIful-i7y
    @SyaifulIful-i7y 8 дней назад

    Mantep.....simpel....wong ndi pean....

  • @CôngCụNhàNông
    @CôngCụNhàNông Месяц назад

    Hay phết ❤

  • @Hasengedy-rg1no
    @Hasengedy-rg1no Месяц назад

    Mantaaaaf x Boosse

  • @skkalimulla6588
    @skkalimulla6588 Месяц назад

    The Jugaad was done correctly but the biggest mistake was that the gear lever is at the back. The gear lever will have to be kept in front. The gear level will have to be kept in front with the help of a pipe or a shraddha. Like the gear lever is kept in normal vehicles, it will be better from the front.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for sharing your very practical opinion! 😊 You're right, having the gear lever at the back can be inconvenient to control, and it would be more reasonable to place it at the front with the help of tubes or other mechanisms, just like regular cars. . I will consider improving the design in that direction to optimize convenience and efficiency. If you have any more suggestions, don't hesitate to share!

  • @ShakibHossn-f2i
    @ShakibHossn-f2i 22 дня назад

    ❤❤❤❤❤

  • @georgemason8521
    @georgemason8521 Месяц назад

    Rollin' coal haulin logs is a good thing.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for sharing! It's true that rolling coal to pull wood is both labor-saving and creative, right? I think this way also helps me learn more about taking advantage of simple materials to work effectively. If you have any other good tips, don't hesitate to share!

  • @Fivepean_allies2000
    @Fivepean_allies2000 Месяц назад +2

    "BLAAAAT......TRAKTOR"

  • @francoisjubault4539
    @francoisjubault4539 Месяц назад +1

    C'est presque ça bonne chance

  • @bortchy
    @bortchy Месяц назад

    Man you are genios

  • @ShmuggumsMcGee
    @ShmuggumsMcGee Месяц назад

    I feel like it would have been easier to put the tractor in front and use its original handlebars for steering.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for your interesting comments! The idea of ​​putting the tractor in front and keeping the original steering wheel is really worth a try. It not only simplifies the structure but also makes the vehicle easier to control. I will consider this idea for future projects. Share more if you have other experiences or suggestions! 🚜

    • @ShmuggumsMcGee
      @ShmuggumsMcGee Месяц назад

      @@HTN_Vegetable People in the East Bloc used to make tractors this way in rural areas. When I grew up in Bulgaria's northeast, almost every farmer had one. The downside of having the engine and wheels on the front is that the turn radius was not every good, so they weren't that maneuverable.

  • @ล้อมกาฬสินธุ์

    สุดยอด🎉

  • @Kurdishjoker
    @Kurdishjoker Месяц назад +3

  • @deddyTTD
    @deddyTTD Месяц назад +1

    From Indonesian

  • @net5834
    @net5834 Месяц назад +1

    🖐️👍🔥🚜❤️

  • @ChangThiSung2001
    @ChangThiSung2001 Месяц назад +2

    Chào cả nhà ❤😂🎉😢😮😅

  • @riewhubpom4848
    @riewhubpom4848 Месяц назад

    อันตราย ไม่รัดท่อนไม้ให้เรียบร้อย

  • @byronbyron864
    @byronbyron864 Месяц назад

    No worries about emissions or insurance to drive on the road

  • @VE3UET
    @VE3UET Месяц назад

    I would have attached the diesel powerhead to the trailer and made an articulating vehicle

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Your ideas are so creative! Attaching a diesel locomotive to a trailer to create a mobile vehicle sounds very interesting. I'm curious to know how you would handle connecting the steering and transmission systems. Please share more details or update when you're done!

  • @RajapOgotunubu
    @RajapOgotunubu Месяц назад

    😁👍👍👍🙏

  • @nalakadisanayake5559
    @nalakadisanayake5559 Месяц назад

    The gear selecting arm is very very dangerous. (Behind the driver.)

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +1

      Oh, you're really observant! 😄 The gear lever placed behind the driver looks a bit... "dangerous", but it also creates a bit of an interesting challenge, right?
      Actually, I placed it like that not only for testing but also to find ways to optimize space for other parts. But don't worry, if it doesn't feel right, I'll think of a way to adjust it to make it safer.

    • @nalakadisanayake5559
      @nalakadisanayake5559 Месяц назад

      @HTN_Vegetable this is very interesting design. Pls place the gear lever to your left or right side for better safe and convenient. Cheers.. ❤️

  • @thongminh91
    @thongminh91 Месяц назад

    Ngon dử moi lan vao số ngoảnh mat ve sau roi lot xuog mương luôn..cam lời

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for your feedback, I will improve so that people don't have to 'strip into the ditch' anymore!

  • @ИванЗапороженко
    @ИванЗапороженко Месяц назад +1

    Изобретая велосипед не изобретите паровоз.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      It's true that reinventing the wheel is not reinventing the steam locomotive, but every 'reinvention' is a learning and improvement! I like to experiment to make things that are compact, convenient, and suitable to my needs. Who knows, maybe this wheel will lead to a bigger idea? 🚴‍♂️

  • @loan261
    @loan261 Месяц назад +2

    Hay nhỉ

  • @СергійКамбур
    @СергійКамбур Месяц назад +1

    Масло жере, як верблюд воду.

  • @deddyTTD
    @deddyTTD Месяц назад +3

    Traktor cargo

  • @HajiujangHobarudin
    @HajiujangHobarudin Месяц назад

    💥💥💥💥💥❤❤❤👍👍👍👍🙏

  • @OLEGIN
    @OLEGIN Месяц назад +1

    Эти дрова и пешком в руках можно было принести

    • @йййр-й9ш
      @йййр-й9ш Месяц назад

      Пол тонны в руках. У самого подобная техника.
      Посмотрел как ты носишь с руках груз.

    • @OLEGIN
      @OLEGIN Месяц назад

      @йййр-й9ш это сухостой и коряжник

  • @SternDrive
    @SternDrive Месяц назад +1

    Wow. It kills mosquitoes as you operate!

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Wow, what a very creative way! 😄 I haven't tried it yet but it will definitely be interesting to be able to combine a car with such a feature.

  • @KamsiahSiah-s6w
    @KamsiahSiah-s6w Месяц назад +3

    Is noot safety 😢

  • @НиколайНазаренко-м1о

    Получилась конфетка у мастера и конструктора золтые руки .браво ,

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Wow, thank you for the candy-sweet compliment! 🍬 I will try to turn the next ideas into 'delicious candy' for everyone to enjoy. Nice to have you along!

  • @sad-me-ima_sad-me-nema
    @sad-me-ima_sad-me-nema Месяц назад +2

    No, you have now turned a multi-functional machine into a tricycle with a trailer.
    Before you could (for example) plow and drive... now you can only drive.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +1

      Thank you for your comments! 😄 I understand what you mean - it's true that this change limits some functionality, but my goal this time is to focus on portability and simpler utility. 🚜✨

    • @DejanJankovic-pq2yg
      @DejanJankovic-pq2yg Месяц назад

      Traktor???? Jel znaš bre ti šta je traktor???? Samo si upropastio kultivator , sa kojim si mogao da obavljaš različite operacije. Napravio si glupavi tricikl sa kojim samo možeš da izazoveš saobracajnu nesrecu... Čemu služi ovo sranje? Da se što lakše povrediš???? Vecu glupost skoro nisam video!!!!!

  • @dr.jmaglow2126
    @dr.jmaglow2126 Месяц назад

    Muy buen trabajo, una construcción maravillosa, ingenioso 100% Felicitaciones.😎👍

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Wow, thank you so much for the enthusiastic compliment! 🎉😊 Getting 100% from you is a great pride for me. I will try harder to bring more creative and quality products. Please continue to accompany us!

  • @TienPham-vw6js
    @TienPham-vw6js Месяц назад +1

    Chế cho vui thôi chứ lưu thông tham gia giao thông thì công an hót đi luôn

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Ha ha, it's true that if you take it out on the street, you will definitely get into some trouble with the police! 😄 This project is mainly for testing and learning, but if I intend to make this car road legal, I will have to do more research on traffic regulations and safety requirements.

  • @Duc-1992
    @Duc-1992 Месяц назад

    Cồng kềnh

  • @ДимаДругой
    @ДимаДругой Месяц назад +1

    А не проще было классически прицеп мотоблок и короче и проще и ненадо огород городить, отдельно он все ровно на мотоблоке ездить не будет невыгодно да и костотряс получится без амортизации, не понравилось столько мороки а пользы как обычно, да и тормоза на телеге можно проще придумать чем он здесь нагородил!!!😢

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for sharing your opinion! I completely understand your concerns about the design complexity and practicality of a walk-behind tractor. The idea of ​​keeping things simple, compact and easy to use is really important, especially when considering cost and efficiency.
      When it comes to creating brakes or vehicle design, it's a fun challenge and I always try to find a balance between creativity and practicality. If you have any suggestions or ideas to make things simpler, I'd love to hear more!

  • @vivoy12bxhx91
    @vivoy12bxhx91 Месяц назад

    ทำไมไม่ทำนั่งขับอยู่ท้ายเครื่อง

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Cảm ơn câu hỏi thú vị của bạn! 😊 Lý do mình không ngồi và lái xe ở phía sau máy là vì vị trí lái ở phía trước giúp kiểm soát phương hướng và tình huống giao thông dễ dàng hơn. Nếu ngồi phía sau, việc điều khiển xe sẽ khó khăn hơn và không an toàn. Tuy nhiên, đây là một ý tưởng sáng tạo và chắc chắn sẽ giúp mình suy nghĩ thêm về các cải tiến trong các dự án sau!

  • @ЗоричевСергей
    @ЗоричевСергей Месяц назад

    Друг помоги найти на ваш трех колёсный фиве стар редуктор на задний мост.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for your interest in my project! 😊

  • @การ์ตุนเคียนซา

    เหล็กไม่มาตฐาน

  • @giangaphao1894
    @giangaphao1894 Месяц назад

    Hay

  • @hoangtuyen4723
    @hoangtuyen4723 Месяц назад

    Sớm đi thôi

  • @orlinchirinos1981
    @orlinchirinos1981 Месяц назад +2

    You need to replace the front tire 🛞 with a fat tire

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад +2

      Thank you for sharing your opinion! 🛞😄 Changing fat tires for the front wheels is a very good idea! Fat tires help increase the contact area with the ground, improving grip and stability, especially when traveling on soft or uneven terrain. This will definitely help your tractor operate smoother and minimize sinking into the ground. Thank you for contributing your ideas, wish you success with your project! 🚜✨

  • @Paviliva
    @Paviliva Месяц назад +1

    O muncit o grămadă o consumat electrozi și curent mai bine al lăsa așa numai agață remorca punea un scaun la remorca și gata 😂😂😂😂😂

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for sharing your ideas! 😊 It's true that keeping the design simple and efficient is a sensible choice, especially when considering power and current. A trailer hitch and additional seats can be a great solution for upgrading your vehicle without adding complexity. I will think more about this idea to test in future projects!

  • @golchiapuda151
    @golchiapuda151 Месяц назад +3

    헛수고 한 것 같다. 실용성이 전혀 없어 보인다.

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Every experiment is a valuable lesson. Sometimes things don't always go according to plan, but the important thing is that we continue to learn and improve

  • @Duc-1992
    @Duc-1992 Месяц назад

    Lsao chở nặng được

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for your question! 😊 I have designed to optimize load-bearing capacity by using a sturdy frame and carefully considering the weight ratio. However, if you need to carry more weight, you can improve the engine or reinforce the frame. Thank you for your comments!

  • @TANZZ-x2z
    @TANZZ-x2z Месяц назад +1

    masih sepi

  • @thangtaquang1430
    @thangtaquang1430 Месяц назад

    Làm cho thỏa

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Thank you for sharing and accompanying me on this journey!

  • @동산양-q6y
    @동산양-q6y Месяц назад +1

    개똘 그냥하나 사는것이
    싸게 먹고영구히 쓰겠네

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      It's true that buying one that lasts forever sounds like a 'good deal'! 😄 But the most interesting thing is still making it yourself, learning many new things, and being able to customize it to your liking. I always believe that the joy in the process of making new things is the most valuable thing! Thank you for sharing your opinion, very thoughtful! 👍"

  • @thongminh91
    @thongminh91 Месяц назад

    Chế cháo ba cái tao lao

  • @Nenujnozanasreshatchomihotim
    @Nenujnozanasreshatchomihotim Месяц назад

    А чт😮 так можно было?

    • @HTN_Vegetable
      @HTN_Vegetable  Месяц назад

      Haha, your question makes me want to say: "How could this happen?" 😮
      In the world of engineering and manufacturing, there are many things that seem impossible, but are possible when we constantly experiment and innovate!