HEY CAM!! 👋 👋. Discovered your channel around 6 months ago its helped me launch my own brand, I have been watching your videos back to back for weeks I was really shocked when today I realised you last video you made was a year ago. I really hope your doing well, are OK, and can find happiness. I can notice in the later your demeanor changes. Really I'd just like to say thank you for all the help and support your channels given me through your tutoring and wish you good luck going forward. Thanks Ben
Hope all is well with your health! I am getting into screen printing. Been focused on DTG and DTF for very short runs. Your channel has been an absolute amazing wealth of knowledge! want to support you and will sign up for you software for at least one month. I'm in Canada and not sure I will be able to fully utilize it but if I can, I will keep the sub! Appreciate you and all you have given newbies like us! Thanks Cam!
Hey Cam- I can't NOT comment.....actually it has been on my mind for a while now- just to tell you how much I appreciate your videos. YOU have been my go to for all things screen printing. See- I am not looking to do run a print shop- but I actually use screen printing on a cylinder screen-printing machine (to logo cups). Your videos were so informative that I actually learned every single thing that I needed to know and what buy from you. So I thank you from the bottom of my heart. I have watched a ton of your videos and found them really entertaining. I have loved your upbeat personality, your raw- real life information, your content has been great. Shoot- I know if I was looking for someone to sponsor- you would be my first pick- your completely honest and super educated in this craft! It seems like this side of your business may have come to a close- which is completely depressing to me- because you are great with the camera. Other screen printing videos don't hold my attention, don't provide the right info or tend to be stuffy and self promoting or just selling product. So, I feel like with you gone we have lost the best of the best! Honestly! Geez- well- I wish you luck....I hope and pray you are feeling better and that your strength is returning (that truly is the most important thing here). I think you are a star and extremely talented. I can't even believe you created that whole software system- who and I kidding I totally can believe it! You're just that good! I personally hope you return to the shop to show us more- but whatever the future holds....Keep at it! See ya around!
Just happen to run across this today. I've been searching for another pricing program to replace the one I've been using for roughly 20 years and is being discontinued at the end of this year. Your system has been exactly the replacement I've been looking for. Just bought the subscription.
Hey cam, you have helped me (and obviously many more) in the start of a business, I hope ur doing well and come back to a flood of comments saying how much we miss u lol also is this software still available?
Hey Cam, are we able to set our own garment costs, rather than pull prices from S&S? Would be super handy for all international users and make accounting so much easier. If not, is this feature planned in the roadmap yet? It's the only thing missing for me. Great job!
Then, when you go to make a quote you will see that custom Item on the page when you go to add garments to a project. And it will have the price that you set it as and you can add all the quantities and move forward with the quote
Anyone know if the software is available as a "plug-in" button to add to a website homepage for the customer to click through and build their own quote?
I run an Anatol Titan 7/8 automatic press... I've learned a hack that might help others wash out their burned images. I use a polyester beanie from Sanmar, I haven't blown out & wasted 10 images in the last 5 years. Must have a high content of polyester... cotton blend will not work. My gradients come out superb from 110 mesh to 350 mesh! I've got a 51 second video I'd like to email you, but I don't have an address. It's also uploaded to my google images, I'll try to link in my next reply. If your channel allows links in comments, it'll be there.
How do you setup the payment system? Are you going to support multiple currencies? Can we use the software for only quote purposes and do offline payment?
@@ThePrintLife I hope all is well. I keep jumping back to your channel hoping to see an update on you and maybe some content or software updates, but we haven't heard from you in so long. I really do hope you are well.
Man what happened to this channel, i used to love seeing all the videos and now its dead. I even went on the FB group and thats dead and gone with no user input yet 8.5k members. Come on homie bring it back, Print Fam for life
Hello Cam, is the site still working? Cause unfortunately I can't successfully make a quote, I get stuck in adding placement/location. Thanks in advance.
Your program has alot of glitches & We have been trying to reach you via email and call multiple times, Everytime I go to select ink type the price drops by almost 50%, I'm not quite sure why you accept our money but do not give us any help when needed?
Software looks dope! Learned a lot from you and a few other RUclipsrs! I just posted my first video using my Anatol 6/6 ⚡️ that I restored! Check’er out 😎
Cam, where are you man? Miss the print life? Please let us all know you're ok.
Please anyone knows how Cam is doing? I really miss hearing from him and watching his videos. I pray he's aight and please pray for him guys 🙏.
It appears his dad passed away about a year ago. Not sure if that has something to do with it.
HEY CAM!! 👋 👋. Discovered your channel around 6 months ago its helped me launch my own brand, I have been watching your videos back to back for weeks I was really shocked when today I realised you last video you made was a year ago.
I really hope your doing well, are OK, and can find happiness. I can notice in the later your demeanor changes.
Really I'd just like to say thank you for all the help and support your channels given me through your tutoring and wish you good luck going forward.
Thanks Ben
Hope all is well with your health! I am getting into screen printing. Been focused on DTG and DTF for very short runs. Your channel has been an absolute amazing wealth of knowledge! want to support you and will sign up for you software for at least one month. I'm in Canada and not sure I will be able to fully utilize it but if I can, I will keep the sub! Appreciate you and all you have given newbies like us!
Thanks Cam!
Hey Cam-
I can't NOT comment.....actually it has been on my mind for a while now- just to tell you how much I appreciate your videos. YOU have been my go to for all things screen printing. See- I am not looking to do run a print shop- but I actually use screen printing on a cylinder screen-printing machine (to logo cups). Your videos were so informative that I actually learned every single thing that I needed to know and what buy from you. So I thank you from the bottom of my heart.
I have watched a ton of your videos and found them really entertaining. I have loved your upbeat personality, your raw- real life information, your content has been great. Shoot- I know if I was looking for someone to sponsor- you would be my first pick- your completely honest and super educated in this craft!
It seems like this side of your business may have come to a close- which is completely depressing to me- because you are great with the camera.
Other screen printing videos don't hold my attention, don't provide the right info or tend to be stuffy and self promoting or just selling product. So, I feel like with you gone we have lost the best of the best! Honestly!
Geez- well- I wish you luck....I hope and pray you are feeling better and that your strength is returning (that truly is the most important thing here).
I think you are a star and extremely talented. I can't even believe you created that whole software system- who and I kidding I totally can believe it! You're just that good! I personally hope you return to the shop to show us more- but whatever the future holds....Keep at it! See ya around!
I watched you from the other side of the earth (Greece) and i learned a lot from you! I MISSED YOU KEM , hope you to be perfect with your health
So happy to see a new video! Hope your doing well!
I'm not even close to needing something like this software, but it's cool AF. Great work, man!
Been waiting, perfect timing.
Just happen to run across this today. I've been searching for another pricing program to replace the one I've been using for roughly 20 years and is being discontinued at the end of this year.
Your system has been exactly the replacement I've been looking for. Just bought the subscription.
Good to see again after a long while Cam, it's been a minute.
Good to see you back.
Hey Cam, great seeing you back! The software looks great.
Wonderful, I was waiting for the update. Hope everything is going well 🙏. Appreciate your support from Montréal Canada 🇨🇦
We miss you bro! Glad your back on the vids 🤙🏽
Holy!!!! So glad to see you
good to see you again .....
Glad to see you Cam
Hey cam, you have helped me (and obviously many more) in the start of a business, I hope ur doing well and come back to a flood of comments saying how much we miss u lol also is this software still available?
Yes! Welcome back Cam!
RIP Cam
For real?
Does anyone know whats up with Cam? Hope he is doing ok...
New version looks fantastic. Do you have any plans to add international pricing?
Glad to see you again :)
sooooo good to see youback
Is Cam okay?
Whaaaaa-ZAAAAAP !!
Miss you man!
Hey Cam, are we able to set our own garment costs, rather than pull prices from S&S? Would be super handy for all international users and make accounting so much easier. If not, is this feature planned in the roadmap yet? It's the only thing missing for me. Great job!
Canadians would probably need this feature, too.
@@CoryFloodwayPrintCo Hey Cory - What's up! I hope you are well :)
You can. Go to "Product" and then "Custom Listing" and you can choose what style garment you want and set the price for that item.
Then, when you go to make a quote you will see that custom Item on the page when you go to add garments to a project. And it will have the price that you set it as and you can add all the quantities and move forward with the quote
@@20vK Oh not much, just keeping my eye on this software! It looks like it's coming along really nicely.
I have your software and its great. Could you do a video on setting up price matrices? I set up the markup % but it doesn't stay.
I hope all is well with u cam!
Come back to us Cam! We miss you!
Great product. Are you limited to only 3 mediums/impressions. Can you add a 4th or 5th, or 6
This is dopeee!
Awesome Man.... Is the software running for Overseas Screen Printer?
I’m starting a new screen printing business any tips on getting clients and how to look professional
Hey CAM Glad to see a VID from you. Can you send me link to your software. I rather fund you then anyone else. TIA
Anyone know if the software is available as a "plug-in" button to add to a website homepage for the customer to click through and build their own quote?
hi , where all of you buy t-shirts ? alibaba or locally ? for which price ? etc
Right on bud
OMG...it have been 2 years now and still no news from cam.. can anyone pliz find out whats goin on
Are you looking for an Apprentice I’m looking to the phx around looking to get into screen printing
哥哥,一切怎么样?我非常想念它
any plans for uk? this looks really useful.
Is there any quick option to create a mock up ?
Do you by any chance offer a trial period?
How do you prevent ink closure (Plastisol ink), from collapsing in on small negative space on your t-shirt design?
Hi, do you design your own artwork or do you get them off the internet. Do you know any sites to find artwork?
I run an Anatol Titan 7/8 automatic press... I've learned a hack that might help others wash out their burned images.
I use a polyester beanie from Sanmar, I haven't blown out & wasted 10 images in the last 5 years. Must have a high content of polyester... cotton blend will not work.
My gradients come out superb from 110 mesh to 350 mesh!
I've got a 51 second video I'd like to email you, but I don't have an address. It's also uploaded to my google images, I'll try to link in my next reply. If your channel allows links in comments, it'll be there.
links were not allowed🙃
Would this work in Canada with Canadian S&S or alphabroder ?
Dope , I do a lot of my business quotes/ invoices from my phone will there be an app or something that I can navigate this on my phone?
Its a web app you can open it on a mobile phone through your browser.
Nice!
video is amazing
HI Cam
Hope all is well is the print life software still up and running
Do you offer and one on one training,
How do you setup the payment system? Are you going to support multiple currencies? Can we use the software for only quote purposes and do offline payment?
I desperately want to bring multiple currencies to the platform but we are away out on that.
@@ThePrintLife I hope all is well. I keep jumping back to your channel hoping to see an update on you and maybe some content or software updates, but we haven't heard from you in so long. I really do hope you are well.
Man what happened to this channel, i used to love seeing all the videos and now its dead. I even went on the FB group and thats dead and gone with no user input yet 8.5k members. Come on homie bring it back, Print Fam for life
Where you at man???
Hello Cam, is the site still working? Cause unfortunately I can't successfully make a quote, I get stuck in adding placement/location. Thanks in advance.
Wow... RIP Cam.
I NEED HELP..... please.. thank you
Since i am from Europe.,can i change the currency to €? and inches to cm? What is the price for the software?
Not yet.
Is the software updating on its own or do we need to manually update?
i have the same question....
It is an auto update on login.theprintlife.com If you are logging into oldlogin.theprintlife.com you will not see the new matrix.
@@ThePrintLife Ooooooo!
The New Matrix System is F’n Dope as F’k!! But hey that’s just me!
Can I make login & password for the customer?
For some reason when you go to sign up it goes to the signup page and then jumps immediately to login.
I cant recreate this redirection from the sign up form. Gotta love the Software game.
Your program has alot of glitches & We have been trying to reach you via email and call multiple times, Everytime I go to select ink type the price drops by almost 50%, I'm not quite sure why you accept our money but do not give us any help when needed?
is this still available?
What happened to Cam? Cam? Cam? Come on man... we need closure.
I guess only US residents ?
Hey how can I sign up??
Go to theprintlife.com and click the signup button.
Software looks dope! Learned a lot from you and a few other RUclipsrs! I just posted my first video using my Anatol 6/6 ⚡️ that I restored! Check’er out 😎
Hey Cam would you mind adding me back to the Facebook group please! I have a few questions with your software that I am using!