StopTech Big Brake Kit Install - 10th Gen Civic 2016 2017 2018 2019 2020 2021
HTML-код
- Опубликовано: 27 июл 2024
- Looking to upgrade the braking performance of our 10th Gen Si Project Car, Rudy gives us an overview of the process in this quick install video. This particular kit is StopTech's Big Brake Kit for the 2017+ Si, but we do carry a wide selection of kits for all generations/models. For more information on these kits, check out our website: www.procivic.com/p/m/civic/st...
This big brake kit from StopTech is very straightforward to install, and the only additional parts necessary to make them fit are a set of wheel spacers (or aftermarket wheels with ample caliper clearance), and brake fluid. To tie it all in, we also installed the SiriMoto N1 Brake Accessories Kit to make bleeding the brakes a breeze.
Fits:
10th Gen Honda Civics
Site: www.procivic.com
Reviews: trustpilot.com/review/procivi...
Videos: / procivicvideo
Instagram: / procivic
Facebook: / goprocivic
IMPORTANT SAFETY DISCLAIMER: When working on your car, always follow proper safety procedures. This includes, but is not limited to, letting your car cool down, using the correct tools and protection, jacking/lifting your car correctly, and in general being careful about what you are doing. If you do not feel confident doing something, do not attempt it! Instead, have someone else with more experience try or hire a professional. PRO Car Studio cannot be held responsible for any incidental or direct damages, injuries, or additional costs caused by installing any of the parts featured in our videos. Авто/Мото
For more information on these kits, check out our website: www.procivic.com/p/m/civic/stoptech-big-brake-kit.html?+big+brake+kit+10thCivicInstall+Comments
Brake..not Break..please.....
Does it need to be trim and sub model specific? I want to put a break kit on my 2020 hatchback.
Do they sell rear upgrades ?? Stupid question but I was just wondering
The 10th gen rotors and calipers are way bigger then any other si that came out. So how much bigger are these stop tech rotors in comparison to the new 10th gen si rotors?
what about the EX T honda civic 2 door coupe?
Will this kit fit the hatchback with aftermarket wheels?
is it the same set up for 9th gen?
would this fit an 2017 sport model? (Turbo non SI)
what SS brake lines fit? i have read the early goodridge SS lines on the Si had poor fitment ...but not sure when the issue was addressed by the manufacturer.
Will this work on civic lx?
Is it required to bleed after installing?
Without a spacer how big of an offset does the wheel set up need
How about a video adding a camber kit to the 2017 Civic hatchback? Thanks.
Unfortunately, we currently do not have this video planned. However, the installation for the 10th gen civic is very similar to the 9th gen camber kit since it replaces the same positioned arm. I have included a link to this video for reference: ruclips.net/video/8j1NOJP3byM/видео.html
It says it won’t fit my 10th gen 2016 Honda Civic coupe lxp on the website Is there any available?
Unfortunately, StopTech has not created a kit for that trim level yet. If they do, we'll of course add it to our site.
I won’t what the quality is, the last product I bought that you showed was scary cheap
Do you guys do customer installations at your shop?
Unfortunately, we are not setup for customer installs. We are mainly set up for research and development on our shop cars only.
Is that the front lip off the sport hatchback?
It is not. This the Track Style lip we carry on our site. You can see our install video for it here: ruclips.net/video/95Evo8wxhLo/видео.html
I hate that you have to use a spacer for this kit to fit with stock wheels. That's unfortunate...that's additional unsprung weight.
Does this improve braking?
This will overall improve braking. It is designed to slow you down much faster than stock, due to their larger size, especially on the track.
@@procivic does the ecu or abs get effected by the change?
Is there kit for 10th gen accord ? 2019 accord 2.0t sport
Unfortunately, there is no kit available for the Accord as of yet.
Jay S will this fit 10th gen accord?
Over 2k , might as well get the 27won kit
Or, since they're all 4 piston brakes, get the wilwood 4piston kit in black for around $900. Or the genesis or DC5 4 piston brembo retro fit for around $900 as well.
Dont get the 27won. Overpriced. The wilwood 6piston bbk is around $15-1700. Which is the same as the 4piston 27won kit
@@darkknight097 $900? Its almost 2k cad
@@the_batmobile0.4 Were you looking at the 4piston or 6piston option?
The 6 piston cost the same as the 27won 4piston bbk.
@@the_batmobile0.4 www.twostepperformance.com/collections/brake-components/products/4-piston-big-brake-kit-w-12-6-rotors-for-2016-honda-civic-black
$940 usd to cad is 1235. Throw in another 1-200 for shipping (don't know shipping cost to Canada to be honest) and its still less than the 27won kit
@@darkknight097 that's the website I checked on, its coming to about $1550 Cad when I choose option black caliper
I believe this will not fit the 10th gen sedan lx model :(
Unfortunately, it will not. At the moment, this kit will only fit the si models.
What about the rear?
As of right now, there is no rear kit. Normally a car uses roughly 70% of the front and roughly 30% of rear during breaking. As such, more emphasis is place on the front. The kit is also designed to work with the stock rear breaks and not affect the brake balance.
Are you located in Canada?
We are not. We are located in California.
Big ..break.. kit...
lol..it broke after installing it..
Sorry about that guys! Slight typo during editing.
Rudy why you cut ya hair mang?
Nice spelling. Lol