Toyota 4runner Rear Axle Seal Replacement

Поделиться
HTML-код
  • Опубликовано: 29 дек 2024

Комментарии • 53

  • @bri13wvu1
    @bri13wvu1 4 года назад +12

    This was super helpful to see how the axle comes out and how everything is assembled. Thank you!

    • @FixItPhillip
      @FixItPhillip  4 года назад +1

      Your welcome, please be sure to subscribe, much appreciated!

  • @prietogerardo1
    @prietogerardo1 2 года назад +5

    Great video, I am going to tackle this sooner than later.
    Note: The seal can leak when the diff breather is clogged, so make note to check that and address it if need be.

    • @stevanrose7439
      @stevanrose7439 Год назад +1

      You are so correct on the axle vent cap. My seals weren’t leaking but I wanted to check the vent cap and when I unscrewed it I heard a poof sound. So I got a new one and also changed the rear differential oil.

  • @frankm0023
    @frankm0023 Год назад +1

    Great Video, I was able to get it done. the only thing was the abs sensor did not want to come out but , I did get the seal the breather and the brakes replaced. Not as hard as I thought.

  • @ad5460
    @ad5460 Год назад +1

    Thanks , simple and straightforward .

  • @maisyray
    @maisyray 2 года назад +1

    This is a Great video, short, covered all the other issues, great editing too......Thank you Phillip

  • @01chevyguy
    @01chevyguy 2 года назад

    Thank you for the informative information. I believe my son will be able to repair this before a 1500 mile trip Thanx Again

  • @bradhaeffner9960
    @bradhaeffner9960 3 года назад +2

    great video and explanation of how to do rear seal. Thanks.. BH Auto Repair.

  • @HomieHektor
    @HomieHektor 4 года назад +3

    Love the roosters in the background, where you located at Phillip?

    • @FixItPhillip
      @FixItPhillip  4 года назад +3

      Kauai Hawaii, ya they are everywhere lol. Wild chickens

    • @HomieHektor
      @HomieHektor 4 года назад

      FixItPhillip Nice, I’m watching you from California 🤙🏼

    • @FixItPhillip
      @FixItPhillip  4 года назад

      @@HomieHektor sweet. I subd to your channel, keep up the good work brotha

    • @Raysgarage90
      @Raysgarage90 3 года назад

      Nice !! Doing mines this winter when it cools down here in Phoenix

  • @scottc3165
    @scottc3165 2 года назад

    Glad to know I don't have to pull the bearings to replace the seals! Also, I never thought to check if it was brake fluid or diff fluid.

  • @yazming1720
    @yazming1720 3 года назад +5

    Now that's how to Fix it...Straight to the point 👉...Thank You for your video. I've liked & Subscribed. Looking forward to any 4Runner D.I.Y. Keep Up the Great Work Philip 💪
    Yazmin.. Venice Beach CA ⛱🏄‍♀️🏄‍♀️🏁

  • @toddbertram6556
    @toddbertram6556 2 года назад

    I love the chickens in the background. Sounds like my sted.

  • @seanware719
    @seanware719 4 года назад +3

    Great camera angle and a great video. Thank you you this was super helpful. This is how video should be done in my opinion.

  • @mkphotofilm
    @mkphotofilm 3 года назад +2

    Nice video. Fun to watch. I like the super wide angle shots. You make it look very easy. I've only got a rubber mallet. Will that do for banging in the seal?

  • @RCinginSC
    @RCinginSC 10 месяцев назад +1

    Great video. Essy job. 👍

  • @charlesyii8963
    @charlesyii8963 Год назад

    Subscribed ! Cool and straight to point the bleeder valve just take out and clean it ?

  • @jdlife6943
    @jdlife6943 3 года назад +1

    Thanks for making the video

  • @marioandrade847
    @marioandrade847 8 месяцев назад

    I had a small accident where I hit a wall and my rear tire wobbles now,I have a replacement axle and need to know if I need to grease the axle end where it connects to the differential before installing it.Also for the brake line do you need to cap the brake line after removing it so it doesn’t spill brake fluid? Any help or tips would be greatly appreciated! Thanks!

  • @vbnautical5041
    @vbnautical5041 4 года назад +4

    Did you use OEM axel seal or just one from the parts store?

    • @Squatch34
      @Squatch34 3 года назад +2

      Same question I was thinking….a friend of mine didn’t use OEM and it leaked immediately after

  • @bar20bbq70
    @bar20bbq70 2 года назад

    So I wonder how long it took for that bearing to go bad due to all the grease being washed out of the bearing by the gear oil.

  • @markhammons2266
    @markhammons2266 2 года назад

    Thanks for your help now you need to do the wreck appearing steering seal and let me know how to install it

  • @reiestrada9167
    @reiestrada9167 3 года назад +1

    hey man, did you drain diff oil before take axle shaft appart or just take the entire axle on a upper position on the new seal side instead?

    • @FixItPhillip
      @FixItPhillip  3 года назад +2

      You don't have to drain the fluid. Just make sure its topped off after the repair

    • @reiestrada9167
      @reiestrada9167 3 года назад

      @@FixItPhillip magnetic oil seal, isnt? thanks buddy!!

  • @adZHARRISON
    @adZHARRISON Год назад

    ON MY 1997 lANDCRUISER (same seal) - GETTING THE SEAL LINED UP TO GO IN SQUARELY IS NEXT TO IMPOSSIBLE - LAST TIME TOOK ABOUT 150 ATTEMPTS AND THE SECOND ONE IS A REPEAT - I JUST PUT THE SEAL IN THE FREEZER TO SEE IF IT WILL HELP - THEY NEED TO GO IN PERFECTLY SQUARE OF THEY WILL DEFORM

  • @LorenzO-305
    @LorenzO-305 2 года назад

    Thanks man 👍

    • @LorenzO-305
      @LorenzO-305 2 года назад

      What’s is the tool you are using to put in the new seal ?

  • @mercurials54
    @mercurials54 3 месяца назад

    Hope my 4th gen 4runner is the same process 🤞

  • @charlesyii8963
    @charlesyii8963 Год назад

    I watch and follow all the steps , thank u after that it start leak again , what might o be

    • @FixItPhillip
      @FixItPhillip  Год назад

      Clogged vent on top of differential. Or a worn out axle bearing

  • @dalearnold5617
    @dalearnold5617 3 года назад +1

    What was the round metal piece you used to drive in the seal?

  • @xemericaxx
    @xemericaxx 4 года назад +2

    Did this stop the leak?

    • @FixItPhillip
      @FixItPhillip  4 года назад +5

      Yes it did. Also check if you have a vent/jiggle valve on top of the rear differential housing. If that gets clogged with dirt it can cause excessive pressure in rear diff causing it to leak from seals

    • @RKOViper1999
      @RKOViper1999 4 года назад +1

      My ABS tone rings gorged some lines inside of the axle housing where the seals goes

    • @xemericaxx
      @xemericaxx 4 года назад +2

      I fixed mine with a new axle seal but only after cleaning out almost a tube of FIPG that the pervious owner had squeezed into the axle to try and stop the leak....

  • @harrison_stone
    @harrison_stone 3 года назад +1

    Thank you

  • @wolfwowitz
    @wolfwowitz Год назад

    Do you have to pull the differential out as well?

  • @gavingriffith9134
    @gavingriffith9134 2 года назад

    is it the same idea for a 5th gen?

  • @ryang1589
    @ryang1589 3 года назад +1

    Did you really just sniff your brake drum that causes cancer in all States