Thanks, I appreciate your taking the time to describe the differences in these very similar modules. I have yet another variant which is similar to your latter examples, is USB-C and "4056" on pcb front and no markings on the rear, but the chip markings are a little different with (no branding) 4056H, 8205LA, and DW01-A
Thanks for the great info! I found 10 of these for 8 bucks and your video helped me figure out I had the last version you mentioned. Seem to be working OK so far trying to recover some over discharged cells.
Found 20 on sale/special discount. It was nice to hear this info to investigate what I got. My current charging systems are "all over the place" and I wanted to organise this and learn some more.
Thank you for the information on the temperature protection. This board is good, but was missing detecting when the battery was overheating. We’ll done.
I've been searching for over a year for this part: Reention Dorado Battery Capacity Indicator Module 2 133 DIS001 5 with switch and USB for a 60v 20ah XKD SAMSUNG50E 230621 6020 0242. Can anyone help me, please?
I have 2 Samsung 2500 mAh cells connected in parallel Total capacity is 5000mAh Can i use single TP4056 module to charge it or should i charge them separately by TP4056
@@kennnnnethchua it is safe. problem is that the TP4056 is linear charger. meaning it just dissipates exeeding voltage into heat. it makes TP4056 chip hot whie charging large battery. you can use IP2312 instead.
The only good information is about turning on temperature protection and it only says so at the end and doesn't explain anything about that, make another video explaining this feature plz
Disagree completely, it is very useful to distinguish the variants of this board because often the seller does not provide the intricate details. On the other hand, it was pointed out to consult the datasheet for temperature implementation which is correct. We can't very well hold your hand and wait for you to supply specifics of your design requirements and then calculate that out for you. If it is beyond your understanding to use a datasheet to work out the component values and topology, then you should leave it alone as it is beyond your skill level, and frankly, probably dangerous for you (or others in your absence) to be messing with DIY charge and discharge of Li-Ion batteries at all.
Yyeeaahhhhh... except he DID in fact explain how to disable the temp function and how to configure it if needed. Not only that, he goes on to explain where you can get more detailed info for this feature. It seems strange that even with the ability to rewind as many times as is necessary, you still somehow missed this info. 🤔🤔🤔
I am a novice electronics guy and have been using these for a while. However, your video taught me a lot and was very informative. Thank you
Thanks, I appreciate your taking the time to describe the differences in these very similar modules. I have yet another variant which is similar to your latter examples, is USB-C and "4056" on pcb front and no markings on the rear, but the chip markings are a little different with (no branding) 4056H, 8205LA, and DW01-A
Thank you so much for high lighting about TP4056 boards and their characteristics. Now I am fully aware what to do. Once again thank you so much.
pls be vegan animals also have lifes Radhe Radhe
Thank you. Excellent content. This gave me a better understanding of what I need to look for when buying TP4056 modules.
Thanks for the great info! I found 10 of these for 8 bucks and your video helped me figure out I had the last version you mentioned. Seem to be working OK so far trying to recover some over discharged cells.
Thank you so much for this! Trying to add charging to a project for the first time!
Really helpful video learned a lot about this module and its variants, thank you
Excellently explained....Thanks
Found 20 on sale/special discount. It was nice to hear this info to investigate what I got. My current charging systems are "all over the place" and I wanted to organise this and learn some more.
vry informative. 감사합니다
Thank you for the information on the temperature protection. This board is good, but was missing detecting when the battery was overheating. We’ll done.
Thanks for the video. Looks like I have some other version, mine have USB-C, 4056E, DW01A, 8205A 😅
You saved my day bro!
Can we connect multiple batteries to one tp4056 module for charging it? Also what happens if modern smartphone chargers are used (like 20w, 60w)
yes you can connect multiple batteries in parallel. also, TP4056 only takes 5W from charger.
@@blue_on how to do fast charging???
I've been searching for over a year for this part: Reention Dorado Battery Capacity Indicator Module 2 133 DIS001 5 with switch and USB for a 60v 20ah XKD SAMSUNG50E 230621 6020 0242. Can anyone help me, please?
The output terminals are the same voltage as the battery I guess?
Thank You.
very helpful video
I have 2 Samsung 2500 mAh cells connected in parallel
Total capacity is 5000mAh
Can i use single TP4056 module to charge it or should i charge them separately by TP4056
as you connected them in parallel, total voltage is 3.7V and it means single TP4056 is applicable.
6:38 arent those scematics from slime vr?
Can you recommend a good P Channel MOSFET to use for the configuration shown at 7:08? Thank you!
not fancy MOSFETs are required. AO3401A will do the job.
Thanks!
Can You give me a link where tot but? Thank You
Nice
How i make a reverse polarity protection formthe Charger?
There is no need to do this. However you could put in a blocking diode. It is no different than polarity protection for anything else.
for charging use only? how about the out put?
The output are next to the positive and negative you will connect the battery wires to on the board
Is it possible to use just one 4056 to charge two 18650 batteries connected (parallel) ?
@@oleganonimka3725 I tried using one 4056 to charge two 18650 batteries connected (parallel) but it gets very hot. I don't think its safe.
@@kennnnnethchua it is safe. problem is that the TP4056 is linear charger. meaning it just dissipates exeeding voltage into heat. it makes TP4056 chip hot whie charging large battery. you can use IP2312 instead.
The video was good and very helpful, just very noisy with the music, stop the music please.
cant edit the video after it is uploaded. but i will note that in future uploads.
can this chip support charging from output points.
No
Caw we connect 10000 mh battery for charging in this module?
Hello. Can i make for module to work all time? For low power consumption
you can use ICs that has power path control like BQ25606. or even all-in-one IC like IP5306.
like
The bloody music is so annoying 🤬🤬🤬🤬
The only good information is about turning on temperature protection and it only says so at the end and doesn't explain anything about that, make another video explaining this feature plz
Disagree completely, it is very useful to distinguish the variants of this board because often the seller does not provide the intricate details. On the other hand, it was pointed out to consult the datasheet for temperature implementation which is correct. We can't very well hold your hand and wait for you to supply specifics of your design requirements and then calculate that out for you. If it is beyond your understanding to use a datasheet to work out the component values and topology, then you should leave it alone as it is beyond your skill level, and frankly, probably dangerous for you (or others in your absence) to be messing with DIY charge and discharge of Li-Ion batteries at all.
Yyeeaahhhhh... except he DID in fact explain how to disable the temp function and how to configure it if needed. Not only that, he goes on to explain where you can get more detailed info for this feature.
It seems strange that even with the ability to rewind as many times as is necessary, you still somehow missed this info. 🤔🤔🤔
pls be vegan animals als have ifes Radhe Radhe
Can i put more the 1 battery?
in parallel, yes.
@@blue_on 4battery 1module is it ok?
you can put even more
@@blue_on ohh i see. Thank you 😊
@@blue_onIm new into these kind of things,Can I use this module to my broken power bank? Can it handle 12pcs. 18650 batt?