How to read DPF soot percentage and do a regen with Autel MK808
HTML-код
- Опубликовано: 12 мар 2020
- ★★★ In this video I will show you how to read DPF soot percentage on Vauxhall Insignia and do a forced regen with Autel MaxiCOM MK808. You can also reset the DPF if you think it's just a sensor fault and your DPF is not really blocked. Buy this OBD2 scanner tool from Amazon here: amzn.to/2Qegeq5
The car in the video is the Vauxhall (Opel) Insignia 2013.
★★★
Please consider supporting us if you found value in this content:
/ iamjules
Thank you for watching, we hope you found this video valuable.
If you did, please give it a like.
If you know someone who needs to see it, share it.
Share your opinions in the comments below and help us improve.
============================================= 
Авто/Мото
Very helpful thank you
Very good and informative video. Cheers Guys! ;)
Hi. I have the MK808TS. Used it today with a 2011 Mazda 3 2.2 Diesel as the DPF service light came on. After 2 DPF static clean ups both times tha results were DPF regeneration failed. I could see the first time I did it the car made all white smoke from the exaust but the second time didn't and was much more clean with less smell. Should i continue and do the regeneration more times in order to end up successfully done??
Hey, can this tool also test live the 4 wheel sensors? I drive a Mercedes w204. CDI. And also one Fiat Panda Cross from 2018. Can you check me of this tool works for me? Thnx .
Can you do a demo about headlamp functions please?
hi - if you have a red indictaor on dash to display DPF FULL - will this tool reset the warning and then allow you to force DPF regen? thanks
Hi, yes. That's what I bought it for initially and it worked well 👍
@@IamJules do you need to clear the fault first OR just run the DPF force regen?> thanks
@@divscuba7096 clear the faults first
Any idea if this Auter 808 cover to do this dpf reg on fiesta 2019 1.5 diesel 85hp? Thanks
Yeah it should work if you update to the latest firmware
Hi. Are you based anywhere near burton on trent by any chance? I have a vw mk5 with dpf light on and glow plug light and in limp mode
Hi Elias, I live in Plymouth. Quite far away, sorry..
Yea quite far lol.. good info on video..cheers
@@eliassaad7206 thanks, take care and I hope you find a way to fix the car without spending a ton of money ;)
@@IamJules hello mate
I am also in Plymouth. I have a Vauxhall Astra 2012 lymp mode after dpf light. Are you able to help me by any chance ?
@@mattkhan2983 I can't promise but I can give it a try mate
Thank you for your video !!!
I was looking for information about DPF diagnostics and Regeneration Service for Opel with Autel MaxiCom 808 .
Your video clearly show me how it can be done . Super !!! It is very easy with Autel.
May be you can make video how to check SAS system for Opel.
Wish you good luck.
Best regards.
Marat.
Thanks, glad it was helpful!
I try with mk808bt pro for audi a6 done all software upgrade but still i cant figure out regen it wont let do , just saying hold brake and padel then msg came , exited due to saftey
Forced dpf regens can be dangerous as they can melt the dpf and cause damage to the engine hence the ‘exited due to safety’
Can you show how to open brake calipers for electric parking brake please qnd how to reset thanks
yeah I'll try and do that as soon as possible
Thank you for your reply
Hi, is there any subscription fees yearly/monthly to use Autel MK808 ?
When you buy it you get 1 year of free updates. You can use it forever without a subscription, but you need to subscribe for updates after the free year.
If I remember right, it's only £25 per year for the updates, but I mine doesn't seem to need any updates yet..
@@BenzManiac Hi, thanks for the reply. Did you try anytime to do DPF "Force Re-Generation" and DPF reset / adaptation ? Does this support Chevrolet Captiva 2.0 Diesel 4WD 2007 ?
@@goodday8362 hi, yes I did it successfully on a few Insignias and a 2008 Epica, so it should be ok for Captivas too
@@BenzManiac I bought few OBD tool , they do not even include my captiva year model. Would you mind checking in your device about this car model ? anyway thanks in advance.
Can you reset or erase dpf from the car computer with maxiCOM ? or just do regenerations ?
You can reset and regen with this. For DPF erase you need an ECU programmer like this one: amzn.to/3vldMRb
@@IamJules thanks for quick answer. Wait only 100 bucks and you can do dpf delete with it. Here in Croatia people are charging like 50 bucks just for delete without taking it off. Have you tried that gadget and does it work that easy ?
@@luka2014 my friends use it all the time at their garage, they charge 25 every time, it's a great investment 👌
@@IamJules sorry for being boring sir but it would mean a world for me if you spare 1 more minute to answer me 2 more questions so i dont throw 100 bucks in air :)
Do you know does it work on all cars or at least huge percentage of cars, and is there any time something went wrong like whole ecu reprogramed while doing it, or mil lamp turned on dashbord and it couldnt be removed, long story short is it safe or there is big chance i f*** up some mercedes s class and ending up paying 5000usd for repair :D
@@luka2014 if you don't go overboard with the numbers and keep BHP, air flow, fuel etc within the parameters indicated, you won't have any issues. These work on any standard car, and are used by most multi brand garages, but I've heard of back alley garages using this to give 400 BHP to 2.0L engines and blowing them up..
thank you. for demo.can you do regeneration while you are driving the car .thank you
No, it has to be stationary and in neutral.
@@IamJules no mate.i ve done it.you can do it stationary or while driving. si .I tried both and it worked .unfortunately couldn't finish regeneration I think due to glow plugs relay faullt p1351
@@TheHamouda ok, that's good to know, I never tried it because the manual said it should be done stationary. I hope you got it sorted
if you try to do regeneration and tape ok it will ask you stationary or while driving and then choose option .its on my mk808
Can he do it
I have a skoda super 1.6tdi 2016. And i have just bought an mk808. I was hoping i could see these figures (mainly when the last regen was, how often it does it and if it actually needs 1 now), but just a few figures available - also graph or dial options are greyed out.
Carmine do an update, sometimes when you just bought the unit the software hasn't been updated and it doesn't have all it needs to communicate properly with your car's ECU. You could also email their support team, these figures may be hidden under some other folder.. I am sure if they are saved in your ECU, this can read them. Let me know what results you get
@@IamJules Thanks. Already updated before connecting to car. Actually you can open the function menu on 2nd page, enter car details and it lists all you can do and view. For my skoda dpf i can view a few figures, but i cannot see as much as you do with insignia. I also own a ford transit and it does about the same as the Skoda. Cant see when last regen was done, or if machine thinks it should do 1 now. All i can do is view a few figures. I cant even view those few figures as a dial or graph, as the options are greyed out. Maybe a later update will enable tese functions for more vehicles.
@@TheCarm996 that's a shame.. I would think about returning the unit and looking for one that's more suited for Skodas/Fords then, no point in keeping it if it doesn't serve the purpose you spent the money for
@@TheCarm996 how are you getting on with the autel now? Thinking of buying one if functions work I have a SEAT so would be similar to your Skoda
Treaba buna tinere
with mk808
Ala aztv ya covur 😄😄😄🤦
Not to Buy this version of Autel because
1. Does not have Bluetooth, only connect with ODB with short cable
2. Screen too reflective
Ты сам посмотри что ты заснял и подумай может ли это видео кому то помочь.посмотри русские ролики это тебя научит снимать видео
why don't you watch those videos then? 🤔