Appreciate the time taken to show this fix. I have the Renault Clio IV and this guide helped me repair the passenger door button following your guide. Job well done and a worthy first video for you i must say.
Good to hear that you are 'sorted' ... I only uploaded the video because i was so pleased to have sorted out my own problem, which after more than 18 months is still working fine. Thanks for the response
So i did try this but sadly the pcb where the switch was mounted on was completely eroded (as was the switch, it fell apart on touching it). Impossible to solder another switch on, the traces on the pcb where gone. But with some glue, soldering the wires directly to the switch, cutting a corner off from the pcb I was able to get it working again. At least for now..... Thanks again for this video, it was very helpful!
very nice that you have taken the time to make this video. im struggeling with a similar problem on my kadjar. you allso couldn't release the electric connector inside the door without removing the interior panel ? i have allready bought a second hand door handle with switch and wanted to completely swap it but i cannot get the connector released from the outside.
Basically when I had removed the door handle I realised that I couldn’t release the electrical connector (couldn’t even see it) so I brought the soldering iron to the car! It was easier than taking off the door panel. Thinking about it there is no reason why you can’t cut the wires to remove the broken part and then rejoin onto the new parts that you have bought. Wrap up the joints with insulation tape and you would be good to go!
Hello Hugh. My Renault Captur in Argentina is having the same problem, however, I'm not sure if it's just a microswitch problem. Do you know if the switch is NC or NO (Normal Closed or Normal Open)?
@@paolocasamenti2365 😂 to be fair after taking the time and effort to shoot this video for us he probably deserved the last one on the market. I might just buy a new door handle all together and just take the microswitch out
@@hughchampion6849 Hi Mr.Champion, am Magnus wife and its my black Captur that's have the same problem, i'll gound you on facebook and wrote to you, I need 2 of those and want to pay for those switch we are in asweden and need to bouth doors and were can we buy them?
Appreciate the time taken to show this fix. I have the Renault Clio IV and this guide helped me repair the passenger door button following your guide. Job well done and a worthy first video for you i must say.
I have been looking for a solution to this problem for over two years! Thankyou so much for your helpful video and audio explanation.
Great video. Just bought a used Zoe and fixed my keyless entry using your guidance, thank you.
Good to hear that you are 'sorted' ... I only uploaded the video because i was so pleased to have sorted out my own problem, which after more than 18 months is still working fine. Thanks for the response
So i did try this but sadly the pcb where the switch was mounted on was completely eroded (as was the switch, it fell apart on touching it). Impossible to solder another switch on, the traces on the pcb where gone. But with some glue, soldering the wires directly to the switch, cutting a corner off from the pcb I was able to get it working again. At least for now.....
Thanks again for this video, it was very helpful!
Thank you for the video.
Excellent video thank you very much great help
It’s a pleasure…. It’s been some years now since I ‘fixed’ it and it still works just fine!
Thank you very much! I'm gonna try that as soon as the wheater permits... Do you have a link to the correct switch to buy?
Does this just happen to black Captur’s 😂😂😂👍🏻😎
My *black* Captur has this problem too.
Good video , explained well ...... thank you 👍🏻!
Our grey one has this as well
Mine is black too and same problem
Thank you 🙂
We’re do you but the chip for the door?
thank you :)
very nice that you have taken the time to make this video. im struggeling with a similar problem on my kadjar. you allso couldn't release the electric connector inside the door without removing the interior panel ? i have allready bought a second hand door handle with switch and wanted to completely swap it but i cannot get the connector released from the outside.
Basically when I had removed the door handle I realised that I couldn’t release the electrical connector (couldn’t even see it) so I brought the soldering iron to the car! It was easier than taking off the door panel. Thinking about it there is no reason why you can’t cut the wires to remove the broken part and then rejoin onto the new parts that you have bought. Wrap up the joints with insulation tape and you would be good to go!
Hello Hugh. My Renault Captur in Argentina is having the same problem, however, I'm not sure if it's just a microswitch problem. Do you know if the switch is NC or NO (Normal Closed or Normal Open)?
Very good video but do you know were to buy micro switch??👍👍
Did you by any chance found one? I can't seem to find them anywhere online either
@@YouMineNL no gino i am still looking , the old boy prob bought the last one on the web🤔
@@paolocasamenti2365 😂 to be fair after taking the time and effort to shoot this video for us he probably deserved the last one on the market. I might just buy a new door handle all together and just take the microswitch out
Do you know where to find the microswitch online? Is it the same model as for Laguna?
Hi Magnus, I can send you one if you would like…. Not sure how to make contact, hugh
@@hughchampion6849 Hi Mr.Champion, am Magnus wife and its my black Captur that's have the same problem, i'll gound you on facebook and wrote to you, I need 2 of those and want to pay for those switch we are in asweden and need to bouth doors and were can we buy them?
Sealed Surface Mount Push Tactile Switch (2 Pack) sold by spiratronics on fleabay
Thank you again!
One question to Captur owner: is this car 'problematic'?