What do i think? I wish i lived close to you, i would pay you to build me a modified attachment, a custom dual front wheel build, like the front end of an ATV, to help me get around faster in my wheelchair, so basically the attachments turns the wheelchair into a quadcycle _[the front castors / small wheels of the chair would be lifted up as part of how the attachment connects to the chair thus a modular mobility attachment device that turns the chair into a quadcycle.]_ You do such skilled, talented, clever quality work. Greetings from Canada.
Good concept…let me know 9f you start selling them…if possible I wud like a fender / guard on the rear tire to prevent water splashing on my pants…great job
Now that is a scooter for a man, good job, I have no doubt that a lot of people would order one after watching this, if it were for me I would add a cover for the rear wheel , not all the wheel just to avoid some watering or accidental friction with my trousers.
I'll tell you this much the construction of making that scooter with a motorcycle tire on the back that looks amazingly hot 🔥 Epic decision and video !!! 💯🙌😎✌️👋👍
I was thinking the same thing. I would have extended the frame and added a stool like seat to keep my entire body away from the tires grip. Awesome build.! 🤘🏼🤘🏼
You never cease to show your clever engineering mind, if only i was able to build things like this but undesirably not able to due to certain health issues. I honestly wish i lived close to you, i would pay you to build me a modified attachment, a custom dual front wheel build, like the front end of an ATV, to help me get around faster in my wheelchair, so basically the attachments turns the wheelchair into a quadcycle _[the front castors / small wheels of the chair would be lifted up as part of how the attachment connects to the chair thus a modular mobility attachment device that turns the chair into a quadcycle.]_ You do such skilled, talented, clever quality work. Greetings from Canada.
awesome, you can also add a chair by attaching metal beams to the sides all the way to the back wheel holder metal beams on the left and right holding the wheels, the beams being tall enough you can weld a seat. so you will be sitting right on top of the wheel, but not the wheel itself, but the seat untop of the big wheel
That thing looks like it will neuter you. I am sure I would fall sitting down on that and getting my squirrel ripped off in that little gap, needs fender.
incredible protype. some EUC motors, suspension, fenders and seat could be added for the next generations. You could easily sell these or even rights to the design
Add in 2 seat and front and back mudgud for safety purpose during wet road to avoid splashing to your back shirt,view and texs from your malaysia subscriber,staysafe besafe and pechout yo.....
love the design super cool. one suggestion though, if you can put a safety removable wheel hub (half) enough to protect your feet or a piece of your jeans or pants get caught by the wheel. overall awesome design...
Such A Cool Design, It Would Be Cool To Make The Back Wheel mLike That BUT To Make / Weld A Seat Ovevr It, Like , DAMN, That Would Be So Cool. Sitting Scooter With That Wheel And Then The Flares And Everything
The point of the scooter is to be under control with weight. The scooter that is under the weight of the rider is the one most easily under control of the rider. The stance and size in this build it over the top. He builds such a sturdy scooter but his feet are in jail slippers. LOL.
As it is, without fender it's just unsafe to use. The concept though, much safer on the road compared to regular sized wheels scooters at the same speed.
1,your legs are way too close to the running rear wheel. 2, the battery bank power supply feels too small to power up this heavy scooter. nevertheless, this is a beautiful piece, very nice made
With ATB’s with 2 wheel sizes the larger wheels is always in front to help clear holes and steps. Don’t fall back on that big rubberized high traction flywheel. Just because it’s possible to build doesn’t make it sensible.
Why does the tire look rounded like that. Would it normally be flat under the weight of a car? Are they made that way to compensate for the shortness of the wall?
Not practical, but looks cool. Low torque with not so high speed - it will roll nice downhill, fine on straight but uphill it wont go at all with such motors/setup. Swap hoverboard motors to something more capable and perhaps add seat above rear wheel - it will look even cooler imo. After that it should be fun piece to ride
Can you share what products you used to make the battery tray? It looked like some sort of resin with fiber mesh reinforcement but I don't know what specific product you used. Cool build. Thanks.
NO! Too heavy! (my opinion PFFFFT!) Otherwise REALLY nice job. I hate it and love it ack ack cough. Like a lemon ice, oh so good but you know there's a price.
Thanks for watching! Let me know what you think of it in the comments below!
What do i think? I wish i lived close to you, i would pay you to build me a modified attachment, a custom dual front wheel build, like the front end of an ATV, to help me get around faster in my wheelchair, so basically the attachments turns the wheelchair into a quadcycle _[the front castors / small wheels of the chair would be lifted up as part of how the attachment connects to the chair thus a modular mobility attachment device that turns the chair into a quadcycle.]_ You do such skilled, talented, clever quality work. Greetings from Canada.
cut the crappy background music
Sir I need dimensions for the frame please help me.
i need dimensions of this project please help me sir.
Good concept…let me know 9f you start selling them…if possible I wud like a fender / guard on the rear tire to prevent water splashing on my pants…great job
I like it! I would add a fender to the rear wheel. Hit a puddle and you'll be drenched. Also, you could add a seat.
A seat, I came here to find that comment and you were the first one, thumbs up.
I would have added a guard to cover that back tire…way too close to your legs.
And a seat on the guard
Thought the same and thought that moving wheel and his ass... not gonna be pretty dude.
I would have placed the big wheel in front and the small one in the back... that way you don't care about road holes that much...
It will be OK. Not everyone cares about safety. Besides, a little tire rub never hurt anyone .
Now that is a scooter for a man, good job, I have no doubt that a lot of people would order one after watching this, if it were for me I would add a cover for the rear wheel , not all the wheel just to avoid some watering or accidental friction with my trousers.
very cool! Maybe a half fender at the back for safety and even a seat for comfort.
this is my wish for christmas. I love it!
you should put a fender on it to protect your calves and then you could also mount a seat on the fender
I have the same thoughts... and maybe include a rear suspension.
standing while riding is the fun part on an escooter
yes without calve scrapes lol @@BH4x0r
same idea,. it would be awesome!
Sweet - Yes a rear fender and seat
I'll tell you this much the construction of making that scooter with a motorcycle tire on the back that looks amazingly hot 🔥 Epic decision and video !!! 💯🙌😎✌️👋👍
Great job. Perfect construction. Only a little bit dangerous for calves. 😅😂
As usual a pleasure to watch !!
I was thinking the same thing. I would have extended the frame and added a stool like seat to keep my entire body away from the tires grip. Awesome build.! 🤘🏼🤘🏼
I think it would make a cool scooter conversion with a seat / fender over the back wheel.
Very nice work very good, you have to try to make a double-track scooter. Now that is a complicated job. Very cool
You never cease to show your clever engineering mind, if only i was able to build things like this but undesirably not able to due to certain health issues. I honestly wish i lived close to you, i would pay you to build me a modified attachment, a custom dual front wheel build, like the front end of an ATV, to help me get around faster in my wheelchair, so basically the attachments turns the wheelchair into a quadcycle _[the front castors / small wheels of the chair would be lifted up as part of how the attachment connects to the chair thus a modular mobility attachment device that turns the chair into a quadcycle.]_ You do such skilled, talented, clever quality work. Greetings from Canada.
Do it with any engineer.
Nice. Could use some wheel arches though. Imagine riding on wet road.
Creative idea, just needs some upgrades, great idea well built, Well done. Perfect construction. There's just a little bit of danger. 😅😂
Mud guard, tire guard are two thing you definitely need to add
Love ❤ deux toute vot réalisation même je suis pas trottinette entant metallier et forgerons bonne continuation pour votre réalisation 😊
Looking awesome but, I will add a fender ( for safety) and a seat on the fender ( for convenience and comfort)😉
awesome, you can also add a chair by attaching metal beams to the sides all the way to the back wheel holder metal beams on the left and right holding the wheels, the beams being tall enough you can weld a seat. so you will be sitting right on top of the wheel, but not the wheel itself, but the seat untop of the big wheel
You are very gifted person. Keep up the good work
nice and creative but it would be even better if the rear tire was covered so it's safe and the lid can be used to sit on
I love it!!! except i would like a big comfortable seat over that tire And 2 fenders so i can drive in rain..Good job Bud
I would of made it a little longer and a bit narrower and definitely put a little fender or some safety over that wheel
This might be the coolest one yet! Well done Sir!
is that 80's p0rn music you got playing in the background? 😂
Awesome build!
Seeing the beginning of a cargo scooter ,even a trike the other way around
0:00
me: that's a Porsche wheel !
I think that rotating a wheel with such a large mass will drain the battery more quickly. A larger tire contact area means more friction.
So gooooood! the scooter you made is amazing!
Another awesome project. Well done sir!! 🤘😎
Wow, nice idea!
That thing looks like it will neuter you. I am sure I would fall sitting down on that and getting my squirrel ripped off in that little gap, needs fender.
incredible protype. some EUC motors, suspension, fenders and seat could be added for the next generations. You could easily sell these or even rights to the design
Bravo, love it, amazing job my friend !!!
Nice 😊❤ add the basket or stored box at the front 👌
Great job!!! Be safe!!!
but you must make a protection so that the rear wheel does not rub against the doors
Awesome sauce. Maybe a nice guard over the wheel with a removable seat?
I can already see the brown streak going up the back from a few muddy puddles.
Imagine riding this and forgetting that the tire isn't a seat. 😳
You can only forget once 🫨🫨 because of you what !
Glockley's we ❤ your channel ❤
Woow amazing scooter thanks for sharing now videos 🤝🔔🔔
Nice one. But please make it safe bro.
Very creative design, great
Need a tire guard to prevent accidents and maybe add a seat.
Add in 2 seat and front and back mudgud for safety purpose during wet road to avoid splashing to your back shirt,view and texs from your malaysia subscriber,staysafe besafe and pechout yo.....
Eu compraria uma dessa! 👏👏👏👏
Só faltou o para-lama (proteção na roda traseira).
Nice 😁😁😁😁
love the design super cool. one suggestion though, if you can put a safety removable wheel hub (half) enough to protect your feet or a piece of your jeans or pants get caught by the wheel. overall awesome design...
Nice build one of the best
You are great! Just two things. 1. That front wheel doesn’t fit to the rest, it’s so “agricultural “. 2. What is the weight of that beast?
Such A Cool Design, It Would Be Cool To Make The Back Wheel mLike That BUT To Make / Weld A Seat Ovevr It, Like , DAMN, That Would Be So Cool. Sitting Scooter With That Wheel And Then The Flares And Everything
Nice work __need some protection around the front half of the rear tire…a simple fender
a nice slick fender is needed.
You should fit a fender to sit on.
Can only ride on a nice day
Great works ! But Suspension ? Seat? Looks kind of dangerous!
The point of the scooter is to be under control with weight. The scooter that is under the weight of the rider is the one most easily under control of the rider. The stance and size in this build it over the top. He builds such a sturdy scooter but his feet are in jail slippers. LOL.
lol looks amazing, obivously it isnt practical, will have the most terrible mileage, that being said, its still an amazing build.
In Germany we say: " Beide Hände ans Lenkrad " xD
Needs a seat as a guard over the tire.
As it is, without fender it's just unsafe to use. The concept though, much safer on the road compared to regular sized wheels scooters at the same speed.
Nice can u add strong back wheel cover n seat
A rear fender with seat.
Super cool build, as always!
1,your legs are way too close to the running rear wheel. 2, the battery bank power supply feels too small to power up this heavy scooter. nevertheless, this is a beautiful piece, very nice made
With ATB’s with 2 wheel sizes the larger wheels is always in front to help clear holes and steps. Don’t fall back on that big rubberized high traction flywheel. Just because it’s possible to build doesn’t make it sensible.
Also that looks like a non DOT snow blower tire in front. There’s way more voids than lugs which has terrible grip on hard surfaces
Should definitely smooth out the bumps!
Very very nice 👍 I like it.
fantastic work!
Why does the tire look rounded like that. Would it normally be flat under the weight of a car? Are they made that way to compensate for the shortness of the wall?
It's because it is a motorcycle tire😏
@@hennybutabi sir i want dimensions of this project please help me i want to make this project.
Safety as an afterthought.......
If you fall on that moving wheel or hit a bump on the road while its moving.... your shredding your pants and atleast half your ass 😂.
Reminds me of Kim Kardasian.
Not practical, but looks cool. Low torque with not so high speed - it will roll nice downhill, fine on straight but uphill it wont go at all with such motors/setup. Swap hoverboard motors to something more capable and perhaps add seat above rear wheel - it will look even cooler imo. After that it should be fun piece to ride
this just the protype, if he decides to mass produce no doubt some upgrades will occur
Add a seat and turn it into an electric mini choppa 😂😂
very cool...
needs fenders especially the rear.
ПРИВЕТ. А ЕСЛИ ЗДЕЛАТЬ КРЫЛО И СЕДЕНЬЕ НАД ЗАДНИМ КОЛЕСОМ
If there was a scooter screaming for a seat, this is that one. Dont know what kind of mileage your going to get with that big tire.
put a fender on that thing, hurts just looking at it.
Super 😊👌💪
No shock absorption system
You need a guard for the rear wheel
quedaría mas interesante con otro motor adelante adaptado..
Can you share what products you used to make the battery tray? It looked like some sort of resin with fiber mesh reinforcement but I don't know what specific product you used. Cool build. Thanks.
It's just regular polyester raisin and glassfiber matts. Plenty of videos on YT on how to use it😏
I would rather put a tire guard and a seat for a more convenient ride. just saying.
Needs a seat or at least a wheel guard, nice job. 👍🏻
nice, but the front needs a porsche wheel too
You should check out my previous build😏
Shock absorder why nothing?
Too wide to turn comfortably.Think about the saddle and wheel cover.
track scooter concept? Ground clearance precludes practical use on public roads. the first sleeping policeman will be an insurmountable obstacle
Rooster tail on this thing be mean as fuck 😂
C’est super mais il ya un risque major manque de protections G D plus siege
Eso, Nice
è bello... meglio se avesse avuto sospensioni e motore diretto senza catena... per il resto mi piace 👍👍
No chang and need cover guard.
Does it have brakes ?
Nice ! 👍
But the scooter weight too heavy, about 200kgs .
It will speed up to 80km/h if using lighter materials ! 🤣🤣🤣🤣🤣🤣
NO! Too heavy! (my opinion PFFFFT!) Otherwise REALLY nice job. I hate it and love it ack ack cough. Like a lemon ice, oh so good but you know there's a price.