Hello mate excellent video. I have a few questions if you Plz answer. I bought icom next I tried 2 versions of ista+ but unfortunately it does work on PROGRAMMING part. Diagnostic is all good but no programming. I get different errors. Cud you help Plz? by the way I don't have your istaP version, I have 3.65 and 3.69 . I don't see PATCHED EDIABAS file. However I already have EDIABAS config icon on desktop after I install BMW tools. it's same version 7.3. Do I still have to find and install this Patched? and do I still have to all other process like Ethernet manually... For Programming icom with ista+ and my new version of istaP? I wud also pay if you can fix through teamviewr. Many thanks
I own a 2011 bmw 335is & a VW Passat.. What do U recommend for the bmw being that’s the one that always has issues vs the VW? People mentioned Carley & this ISTA which I know nothing about..
did you ever get any results ? looks like the person who put this video up is either NOT interested in replying, or doesn't know ? let me know if you need assistance, i acknowledge the fact that it was '3 YEARS AGO' but i'v just only come across this, 🙂👍
i have a bmw f10, i replaced my abs module, i need to change the vin i have a enet cable and k-d can i have downloaded over 1tb of bmw software the latest one gives me a voltage error, someone told me i need a icom someone also told me insta p can emulate i com just to make sure i have a charger.. any tips?
Hi, i've no cable at this time and I 'll go for a K + DCAN USB. So this is only for the ENET configuration or is it a trick to get the usb working ? Thanks
I have an Enet ODB2 cable and i did everything by the book and still no connection between my car and the program... any advice ? I tryed on bmw e60 and bmw e46 still nothing
it's because the F, and G series has a multiplexer built into the Main DDM of the car, so if you were to look inside the E net cable ,it has just a 500 ohm resistor across 2 connecting leads,(hence their cheap price) which informs the car Computer(if it's compatible model, not the earlier E series) that it needs to connect with software on diagnostic laptop through the connecting cable, hence there is NO need for a multiplexer on these newer brands, you will need a K + D can cable and configure the settings (plenty of videos on Ytube) and then you will have success. hope this helps. 🙂
Hello guys, I want to ask, I have win 7 64bit and 8GB memory, but new Installer want to 3GB or more .. just in windows I see 7,96GB memory .. kompatibility choose , administrator etc without change, I try only with 1 memory slot on 4GB .. still same problem .. Installer feil on memory capacity.. Help pls :(
thank you for a good explanation of install
Hello mate excellent video. I have a few questions if you Plz answer. I bought icom next I tried 2 versions of ista+ but unfortunately it does work on PROGRAMMING part. Diagnostic is all good but no programming.
I get different errors. Cud you help Plz?
by the way I don't have your istaP version, I have 3.65 and 3.69 . I don't see PATCHED EDIABAS file. However I already have EDIABAS config icon on desktop after I install BMW tools. it's same version 7.3. Do I still have to find and install this Patched?
and do I still have to all other process like Ethernet manually... For Programming icom with ista+ and my new version of istaP?
I wud also pay if you can fix through teamviewr.
Many thanks
You could help install E net cable by TeamViewer?
I own a 2011 bmw 335is & a VW Passat.. What do U recommend for the bmw being that’s the one that always has issues vs the VW? People mentioned Carley & this ISTA which I know nothing about..
did you ever get any results ? looks like the person who put this video up is either NOT interested in replying, or doesn't know ? let me know if you need assistance, i acknowledge the fact that it was '3 YEARS AGO' but i'v just only come across this, 🙂👍
i have a bmw f10, i replaced my abs module, i need to change the vin
i have a enet cable and k-d can
i have downloaded over 1tb of bmw software
the latest one gives me a voltage error, someone told me i need a icom
someone also told me insta p can emulate i com just to make sure i have a charger..
any tips?
Hi, i've no cable at this time and I 'll go for a K + DCAN USB. So this is only for the ENET configuration or is it a trick to get the usb working ?
Thanks
My icom won’t show with all these settings any ideas?
I have an Enet ODB2 cable and i did everything by the book and still no connection between my car and the program... any advice ? I tryed on bmw e60 and bmw e46 still nothing
If im not mistaking, enet connection is not intended for E series, it does work on F & G series maybe thats why your cars arent being recognized
it's because the F, and G series has a multiplexer built into the Main DDM of the car, so if you were to look inside the E net cable ,it has just a 500 ohm resistor across 2 connecting leads,(hence their cheap price) which informs the car Computer(if it's compatible model, not the earlier E series) that it needs to connect with software on diagnostic laptop through the connecting cable, hence there is NO need for a multiplexer on these newer brands, you will need a K + D can cable and configure the settings (plenty of videos on Ytube) and then you will have success. hope this helps. 🙂
Do you have full software like on video,for sale?
I will need full software send on Mega
I have
After setting up this ip address in ipv4 still saying unidentified network ?
Hello guys, I want to ask, I have win 7 64bit and 8GB memory, but new Installer want to 3GB or more .. just in windows I see 7,96GB memory .. kompatibility choose , administrator etc without change, I try only with 1 memory slot on 4GB .. still same problem .. Installer feil on memory capacity.. Help pls :(
3GB will be hard drive space, not memory.
where do I get ediabas konfigurator from?
Asking same question anyone know where I can find this ??
@@Dj_amazing Download
@@fresherro I get that what’s the link ?
@@Dj_amazing blog.eobdtool.co.uk/free-download-bmw-standard-tools-2-12-coding-software/
Where can I get Icom Simulator
i cant see USB network
Is this a uk based
They've stolen the video from a UK channel