I know that this is a super old video and that this unit is UBER frustrating to use (but it sounds great). Here is some information that I've figured-out and/or stumbled across that perhaps could help others. First of all, here is another great video describing the different between presets and patches/banks on this unit: ruclips.net/video/ZdaKEJPeQIw/видео.html Thus, to call-up the preset #55 "Htune Megaphone" as listed in the manual, you change the style to Pop/R&B, then hold down the Tweak button, then select #4. I had to make a matrix to show how things work. Secondly, when using Voice Support 2 to manage your presets, you have 20 presets in the workspace (correlating to 20 patches on the unit). When importing patches onto your unit, bank 1A corresponds to workspace item 1 while bank 1B corresponds to workspace item 11. 2A = 2 and 2B = 12 and so-forth. I'm pretty sure that you are pretty stuck with various parameters (eg: can't change between flange/chorus, can't change between megaphone/autotune) so you have to find a patch that approximates what you're shooting for and edit from there. Hopefully this helps someone. I know it would have saved me hours of frustration!
Is there a way to select a chromatic scale for the HardTune effect? Both Voice Support and Voice Support 2 won't recognize the Voice tone Create xt. Thanks.
@@PianoGesang Then I recommend the following current TC-Helicon models (microphone stand mountable): Perform-V, Perform-VG, Perform-VK, VoiceLive Touch 2.
hey folks, at the end of this demo, you mention there is not pedal control for reverb as it is either on or off... what if I want to create a vox with sweeping reverb live utilizing an expression pedal? does TCH do anything like that? other than the larger vocal rigs..
Donal Ward-McCarthy We have the ability to control Reverb level and Reverb send via Expression pedal on VL3, but there's no control tied to Reverb decay. So, you could swell a big verb, but not increase/decrease the actual time.
+Yiannis Silver Yep, on any preset with Delay active, you press/hold the ON footswitch to enter tap tempo mode. Tap the tempo and then let it time out.
Correction to 1:44: Create XT can be controlled by TC-Helicon MP-75 Mic Control. A firmware update may be required. You have to enable +48V and it can be setup to control either footswitch.
Is it possible to control the amount of effect that is blended with the main signal from the unit? I mean, for instance if i need to have a doubling octave over my voice but I need to hear both signals, i can´t find it clearly explained in the manual
I am afraid fx (tune and transducer effects) block is not affected by the mix knob.That knob controls only the dryness/wetness ratio of mod, delay and reverb in relation to your main voice , but tune fx is excluded from that ..Thanks anyhow!
Can you explain how to connect Create XT? Video? I connect to a Mixer to a PA........... I forgot how to plug everything in, haven't used it for a while.. thanks!
Hello, I could not find a separate section for Create XT, so I write it here...Quick question can-Create XT be used by only one person on can I also use it as a master effect to the whole mixer ? So by and aux return ? Thanks in advance - Greeting - Kazimierz
Hey i'm coming back! I left the message 4 days ago und bought the Create XT, today the great little thing comes, but i can not understand how to use it... the board has too many buttons, the user guide also doesn't show the informations very clearly... so i come to this video again..now i know how to use it man. haha. Hope TC can still creat such great thing in the further but let the manipulate be easier=) regards!
Hey guys, I've just bought voicetone create XT. It's an interesting consolle, but has a one big problem (for me it's a problem, maybe not to you). It has in almost of EVERY effect or style, the goddam HARDTUNE/AUTOTUNE. I simply hate this functions, and there's no chance to take out, I think. I wish there is an option to take out, but i still not found. If anyone knows something about this, please answer this post. Thank you and enjoy your tc helicon
OS v1.1.02 BUILD35 (2011.05.02): to switch the subtle pitch correction on/off, double click the TONE button. If you are smart, the TONE LED will flash and its operation will change.
Nahuel Pizarnik Yep, there's hardtuning on some of the presets. Here's the complete list of available styles. www.tc-helicon.com/download/manuals/voicetone-create-xt/VoiceToneCreateXTDetailedStyleList.pdf
No, you can't. My idea of using the Create XT is for gigs where I don't wanna carry much equipment and it's known to me that harmony function is not needed.
Pitch correction on/off doesn’t change the status of the Tone function (adaptive EQ/compressor/deesser). Here’s the rundown on LED indications: 1.Only Tone active: Tone LED glows solidly. 2.Only pitch correction active: Tone LED flashes on periodically. 3.Both Tone and pitch correction active: Tone LED glows solidly but flashes off periodically. You can't control the amount of pitch correction, there is no control parameter.
😂 now your geniuses have decided on your newer models, we’ll leave the reverb on when you hit the off switch. Obviously you guys don’t use these things in real life. 😂
probably the most fun demo I've watched
just got one today - so sick! easy to use and a great bank of sounds : )
I know that this is a super old video and that this unit is UBER frustrating to use (but it sounds great). Here is some information that I've figured-out and/or stumbled across that perhaps could help others. First of all, here is another great video describing the different between presets and patches/banks on this unit:
ruclips.net/video/ZdaKEJPeQIw/видео.html
Thus, to call-up the preset #55 "Htune Megaphone" as listed in the manual, you change the style to Pop/R&B, then hold down the Tweak button, then select #4. I had to make a matrix to show how things work.
Secondly, when using Voice Support 2 to manage your presets, you have 20 presets in the workspace (correlating to 20 patches on the unit). When importing patches onto your unit, bank 1A corresponds to workspace item 1 while bank 1B corresponds to workspace item 11. 2A = 2 and 2B = 12 and so-forth.
I'm pretty sure that you are pretty stuck with various parameters (eg: can't change between flange/chorus, can't change between megaphone/autotune) so you have to find a patch that approximates what you're shooting for and edit from there.
Hopefully this helps someone. I know it would have saved me hours of frustration!
Thank you for all the tips and tricks
You're welcome!
Can you adjjust the amount of autotune on this.. or is it one hardtune "t pain" setting
Now I understand that thing! :D
Great demo!
Thanks. Hard to follow. Do you have it in slow motion? Or an amphetamine-free version?
I agree, both guys are having too much fun instead of focusing on intelligibility.
does this pedal have the capacity to pitch vocals up and down dramatically?
Not the CreateXT specifically. You'd want to look at a unit with more control over the pitch correction, like VoiceLive Play, Touch2, VoiceLive 3.
editing sounds in this unit is such a pain... why so few knobs for so many parameters... :-(
does the firmware update add Auto-Chromatic Pitch Correction
This is a great review. I understand my device much better now. I wonder if you could chain the C1 to the Create XT.
Is there a way to select a chromatic scale for the HardTune effect? Both Voice Support and Voice Support 2 won't recognize the Voice tone Create xt. Thanks.
I can't seem to find the app for voiceTone Create XT
Google "TC-Helicon VoiceSupport 2". It runs on Windows and Mac computers.
hmm got the phantom power on but i cant get any signals from my microphone any ideas?
can someone explain me why do i have only 20 presets in my voice support 2..
Because you haven't pressed and held the Tweak button and toggled through the other ones. There are 80 more
Create XT has 10x2 modifiable Presets and 10x10 non-modifiable Styles.
Does this still have the best electric autotune ?????
So now that this no longer is being sold as new, which pedal has replaced it?
TC-Helicon has no direct successor. If you want a floor effect and don't play any instrument, I can recommend TC-Helicon VoiceLive Play.
@@kiskadar69 thanks :-)
@@kiskadar69 too clunky
@@PianoGesang Then I recommend the following current TC-Helicon models (microphone stand mountable): Perform-V, Perform-VG, Perform-VK, VoiceLive Touch 2.
Saludos yo deseo eliminar el efecto hard tune ya que en todo momento esta activo y no encuentro la forma de eliminarlo ayuda.
Solo desactiva el boton de imod que es el segundo boton uno antes del delay y ya esta
Lo presionas y se vuelve a activar
Espero te ayude
Is the A/B switch only latch or does it also function as momentary? I want to be able to press and hold it to go to B and release it to go back to A.
No
hey folks, at the end of this demo, you mention there is not pedal control for reverb as it is either on or off... what if I want to create a vox with sweeping reverb live utilizing an expression pedal? does TCH do anything like that? other than the larger vocal rigs..
Donal Ward-McCarthy We have the ability to control Reverb level and Reverb send via Expression pedal on VL3, but there's no control tied to Reverb decay. So, you could swell a big verb, but not increase/decrease the actual time.
Hello there, can you tap the tempo on this one?
+Yiannis Silver Yep, on any preset with Delay active, you press/hold the ON footswitch to enter tap tempo mode. Tap the tempo and then let it time out.
Correction to 1:44: Create XT can be controlled by TC-Helicon MP-75 Mic Control. A firmware update may be required. You have to enable +48V and it can be setup to control either footswitch.
Top amazing gear
Can't you get the same effects with the Voice Live 2 ? It kinda seems like the VL2 has fell by the wayside. I'm looking at getting the VL Touch 2 now.
Is it possible to control the amount of effect that is blended with the main signal from the unit? I mean, for instance if i need to have a doubling octave over my voice but I need to hear both signals, i can´t find it clearly explained in the manual
+marcosalvarezalvarez That's probably the Mix knob. That controls the Dry/Wet ratio.
I am afraid fx (tune and transducer effects) block is not affected by the mix knob.That knob controls only the dryness/wetness ratio of mod, delay and reverb in relation to your main voice , but tune fx is excluded from that ..Thanks anyhow!
Can you explain how to connect Create XT? Video?
I connect to a Mixer to a PA...........
I forgot how to plug everything in, haven't used it for a while.. thanks!
Lise Lo You'll probably find this video handy: ruclips.net/video/qq0AOtafIjs/видео.html
thanks guys...very, very informative. forget the manual; tc helicon should just put an index card in the box with the link to this video written on it
Hello, I could not find a separate section for Create XT, so I write it here...Quick question can-Create XT be used by only one person on can I also use it as a master effect to the whole mixer ? So by and aux return ?
Thanks in advance - Greeting - Kazimierz
very useful. thanks guys :)
Can this be pluged in the pc ? like an interface or so ?
no
Is this unit still in production? And if so why? Can't find it on your products page. Thanks!
Create XT is no longer in production.
Wow! where do i buy dis thing?
Hey i'm coming back! I left the message 4 days ago und bought the Create XT, today the great little thing comes, but i can not understand how to use it... the board has too many buttons, the user guide also doesn't show the informations very clearly... so i come to this video again..now i know how to use it man. haha. Hope TC can still creat such great thing in the further but let the manipulate be easier=)
regards!
great! i just got this!!!
Hey guys, I've just bought voicetone create XT. It's an interesting consolle, but has a one big problem (for me it's a problem, maybe not to you). It has in almost of EVERY effect or style, the goddam HARDTUNE/AUTOTUNE. I simply hate this functions, and there's no chance to take out, I think. I wish there is an option to take out, but i still not found. If anyone knows something about this, please answer this post. Thank you and enjoy your tc helicon
Turn of the FX or the microMod button
OS v1.1.02 BUILD35 (2011.05.02): to switch the subtle pitch correction on/off, double click the TONE button. If you are smart, the TONE LED will flash and its operation will change.
that thing have pitch?
Nahuel Pizarnik Yep, there's hardtuning on some of the presets. Here's the complete list of available styles. www.tc-helicon.com/download/manuals/voicetone-create-xt/VoiceToneCreateXTDetailedStyleList.pdf
can i do harmonys with this like tc helicon harmony singer and voice tone harmony xg t model ??
No, you can't. My idea of using the Create XT is for gigs where I don't wanna carry much equipment and it's known to me that harmony function is not needed.
creating specific sounds with this thing is such a pain :-(
Pitch correction on/off doesn’t change the status of the Tone function (adaptive EQ/compressor/deesser). Here’s the rundown on LED indications: 1.Only Tone active: Tone LED glows solidly. 2.Only pitch correction active: Tone LED flashes on periodically. 3.Both Tone and pitch correction active: Tone LED glows solidly but flashes off periodically.
You can't control the amount of pitch correction, there is no control parameter.
From where I can turn on/off pitch correction dude?
@@georgiyonkov9634 Firmware v1.1.02 BUILD35 (2011.05.02): to switch the subtle pitch correction on/off, double click the TONE button.
@@kiskadar69 Big thanks to you ;)
1:30 and they are still discussing where to start :D
But presenting a voice FX unit in a room with such prominent reverb... not smart.
bella maglietta!
No child could do this.
I can't find the terrible humor button on mine 🧟♂️
So complicated
😂 now your geniuses have decided on your newer models, we’ll leave the reverb on when you hit the off switch. Obviously you guys don’t use these things in real life. 😂