Whenever I see Issac has published another video, I literally put down what I'm doing to watch it. The man is one of our nation's Living Treasures. Super cool how he would leave handy little insert points to the cuts he was coming back to. I learn something every time I see his work.
I disagree, he's one of our Republic's living treasures!! The Republic of Texas!! Yeah, he's definitely the best torch men I've ever seen!! I'd proudly, yet humbly, ask for him to sign my hood, if even given the chance.
It's incredible how steady of a hand you've got and how easy you make it look. There's something special with the small imperfections of hand cutting something like that. A skill acquired through a long carrier. Thank you for sharing with us.
I have been following your channel for some time and never been disappointed with with your talent and skill thank you for taking the time to share your project s
Any time you cut with the torch I always watch your hand work just to see if I can pick up on something that will help me cut better, you are truly a master with a fire wrench
And after cooling, I could spend a whole afternoon filing the edges and listening good old 80's music.... Have a great year Isaac, and thanks for teaching!!!!. Cheers from Buenos Aires!!! George.
That's really good. I wish I could cut like that on the best of days. Really good. Really enjoy watching your videos. I hope the bad weather never got you guys down there. 👍👍🙂🇨🇦
I’m assuming that’s 3/8” plate. Tip size, and pressures for us guys that aspire to be you. For the young guys out there it’s easy to see the experience that Issac shows with everything he does. Master!
Argg.... Thats what I forgot! I was meaning to highlight that. Here goes. No.000 tip and 7/70 on the pressures. up to 5/8" plate. then a No.1 up to 1-1/4". Same pressure.
For non torch users, imagine someone telling you to color that same image and you had to stay within the lines by using cans of spray paint and you can't use tape to section each part off.
A well tuned fire ax and a nice design. I bet you could whittle out that layout in relief with the carbon arc gouge by using a cutout as the guide. I bet it would look killer.
Torch is so much nicer than plasma because the ridges in the cut . At least if you have used a torch for cutting because then you know the pure art work it takes to accomplish it .
Isaac, you never disappoint, even years ago! 🙂 Thanks for all you do to share with and teach us. Your work with the torch is unique. Bruce, Karin, Halgrim and Bella from central Germany wish you and your family a Happy New Year with health and peace.
At one time, I was pretty good with a torch. My brother-in-law had me burn out "California" on a rusty step bumper on his truck. I could never hold a candle to Isaac. My welding helmet is off to you.
Dear Isaac, anything you do is worth watching……… the talented with the torch you might Be compared to Devanshi doing the painting !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!my HAT OFF to you keep up the great work!!!!!!!!!!!!!!!!!!!!!!!!!happy new year,,,,,,,,,,,,,,,,,,,,, by the way one question is 57 Chevy in the background, the red and white beautiful card two door four-door couldn’t make it out Samuel bacon
@@ICWeld Isaac I was born in 1955 for myself coming into the world my father bought my mother a brand new 1955 Chevy station wagon. They had it for about six months. My mother got sick of making the payments and they got rid of it so the trifives have always been the love of my heart now and how old I am told you I was older than you happy new year PS sweet ride Samuel bacon.
thats very cool, I noticed the careful outward cuts when you needed to change position, very useful tip to add to a very clean tecnique Thanks for sharing and Happy new year to you and your family
Hello Issac: Good to see the "Old Style" plasma table. Kudos to a Master Craftsman. Like most talented people, you make that look easy. I have enough experience to know it is not easy. I would have spent a lot of time with a hand file to just make it legible.
Mr. Isaac, U are the only cutter I've ever seen that consistently drops the cutouts with little more than a "nudge" with Ur hand/finger. That seems like such a little detail and I know it comes from having enough flame but not too much. There are probably other "good cutters" out thar, I just haven't seen them. HAPPY NEW YEAR to U and Ur FAMILY. Let me know if U can use the lathe chuck I told you I have.
Who needs a plasma cutter when issac is around 😊
I was just about to type exactly the thing. 👍
Whenever I see Issac has published another video, I literally put down what I'm doing to watch it. The man is one of our nation's Living Treasures. Super cool how he would leave handy little insert points to the cuts he was coming back to. I learn something every time I see his work.
Excellent skill set. Positive attitude. Strong faith. Finishes everything he starts. What more could you ask for ... Happy New Year !
Same!!
I disagree, he's one of our Republic's living treasures!! The Republic of Texas!!
Yeah, he's definitely the best torch men I've ever seen!! I'd proudly, yet humbly, ask for him to sign my hood, if even given the chance.
Oh totally agree! That’s what I do too!
A really living treasure!!!! Long life for him!!!
Isaac, I hope you and your family have a great new year. Thank you for sharing your videos throughout 2024.
WOW, an absolute master with a torch, gouge, lance, stick etc. An inspiration for those of us who's cuts look like a beaver chewed them off lol
This channel is a wealth of information. Absolute tradesman.
Insert Master between Absolute and Tradesman.
Currently at work grading a slab and stopped to watch this, 👍 the laborers are always on their phones anyways
Great job. You’ve had a hell of a teacher. Never quit getting better..
I'll bet you were that good the first time you picked up a torch. I think you were born with these skills and I'm glad you're sharing it.
Thank you for sharing, always a pleasure watch your project, i learn a lot , happy new years 👍👍👍👍
You will never see a more skilful use of the torch.
You never cease to amaze me with your torch work, Issac.
I always watch when a new video comes on. Absolutely love how surgical you are eith the torch!
Awesome video sir! No gibber jabber, no filler, no fluff. Just some real-time display of skills. Fine job my friend!
Isaac Is the best touch man I have ever seen and i"m 75 years old and have seen a lot torch men in my life and a hell of a nice man
It's incredible how steady of a hand you've got and how easy you make it look. There's something special with the small imperfections of hand cutting something like that. A skill acquired through a long carrier. Thank you for sharing with us.
When making art becomes an art.
Isaac, as the old saying goes: Everything is bigger and better in Texas!
Beautiful torch control. Thanks for sharing!
“Best I can do”, brother, I wish I was a quarter as good as you! Awesome
I have been following your channel for some time and never been disappointed with with your talent and skill thank you for taking the time to share your project s
That there's the most texas, texas ive ever texas'd.
Always good to see a new IC weld video.. thanks Issac for all you do !
Any time you cut with the torch I always watch your hand work just to see if I can pick up on something that will help me cut better, you are truly a master with a fire wrench
The beginnings of an epic ride (so far) in fabrication and repair! Would love to see you with 1 million subs and not sure why not??!
Yeah, 1Mil would be great. Then I could really focus on adding teachable videos. its tough having to film and work bit I'm glad you enjoy the content.
An artist with a flaming brush have a Happy and blessed New Year to you and your family my friend and keep that torch burning
I am always amazed at how skilled some folks are with a cutting torch
The greatest man with a gas axe that ever lived! Blessed New Year to you Isaac!
Extreme craftsmanship
Wow !! Imagine if was a surgeon, precision everytime!
And after cooling, I could spend a whole afternoon filing the edges and listening good old 80's music.... Have a great year Isaac, and thanks for teaching!!!!. Cheers from Buenos Aires!!! George.
The Charlie Daniels of the cutting torch !
Great to see a torch set right with someone who knows how to use it. Thank you, Lynn
Man you are A Master of your trade what ever is thrown your way you just get it done
Big Cheers to you and your crew
From North Queensland Australia
That's really good. I wish I could cut like that on the best of days. Really good. Really enjoy watching your videos. I hope the bad weather never got you guys down there. 👍👍🙂🇨🇦
All the best Isaac. One can't appreciate something like that unless he tries it once. Happy new year.
you should do this again but with your fancy new plasma torch
I just might try it.
Hope you have a happy and prosperous new year and get a heap more subscribers. Close to 150k now and heading up.
Issac I've said it before and will say it again. Your a surgeon with the torch. 😊
Your probably one of the best I have seen with a torch clean it up and it will look great
frikkin insane…..never seen a torch run like that….great stuff
I enjoy watching You use a torch very much Issac. Thank You and Best Wishes to You, Your Family and Friends for the coming year !
My brother: yells, Hey the Cowboys/Philly game is on! Me: Ok, be there in a few, Isaac just uploaded a new video!
Issac was the first cnc torch table! 🔥
I’m assuming that’s 3/8” plate. Tip size, and pressures for us guys that aspire to be you. For the young guys out there it’s easy to see the experience that Issac shows with everything he does. Master!
Argg.... Thats what I forgot! I was meaning to highlight that. Here goes. No.000 tip and 7/70 on the pressures. up to 5/8" plate. then a No.1 up to 1-1/4". Same pressure.
Torch Yoda does it again. Your skill is beyond incredible.
This is true craftsmanship at its finest.
I am so happy for more uploades
The man has a gift for sure love his work ❤️🇨🇦🇺🇸
Spectacular human CNC portable torch technique 👍
A GREAT CRAFTSMAN BUT A BETTER FATHER
Beautiful work Issac .I always admire your torch work and skill.Cheers from Australia.
The master of the Gas Axe
That was absolutely stunning. Thank you Isaac.
Very nice footage !! Excellent torch work as always !! And God Bless Texas !!
When I need a heart surgeon I'll call on Isaac!!!!!
Professor Gas Axe is in the house!
For non torch users, imagine someone telling you to color that same image and you had to stay within the lines by using cans of spray paint and you can't use tape to section each part off.
Well, if that's the best you can do..... just kidding! Didn't have any doubt that the whole thing would fall on that last cut. Nice grains! Great cut!
So good with a cutting torch.
Happy holidays Isaac, here's to a wonderful new year buddy, thanks so much for sharing all you do, love the channel 🎉
A well tuned fire ax and a nice design.
I bet you could whittle out that layout in relief with the carbon arc gouge by using a cutout as the guide. I bet it would look killer.
You are really good at your trade !! 🙂
SO GOOD with a torch!! 😎😎
IC Skillz! Super nice work my friend! Wishing You a Healthy and Blessed New Year!⚡︎👍
Very nicely done Issac !!! Cheers
Torch is so much nicer than plasma because the ridges in the cut . At least if you have used a torch for cutting because then you know the pure art work it takes to accomplish it .
You done well to cut all that pattern out free hand well done top marks.
Isaac, you never disappoint, even years ago! 🙂 Thanks for all you do to share with and teach us. Your work with the torch is unique. Bruce, Karin, Halgrim and Bella from central Germany wish you and your family a Happy New Year with health and peace.
At one time, I was pretty good with a torch. My brother-in-law had me burn out "California" on a rusty step bumper on his truck. I could never hold a candle to Isaac. My welding helmet is off to you.
Thanks
Wow. Looks like it was done with a plasma cutter. Nice.
Thanks for sharing. Happy new year to you and yours!
Lone star torch star . All the best to you and yours and a very happy new year.
great torch work . its a cool design I hope you and your family have a good New Year. Thanks Issac
Dear Isaac, anything you do is worth watching……… the talented with the torch you might Be compared to Devanshi doing the painting !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!my HAT OFF to you keep up the great work!!!!!!!!!!!!!!!!!!!!!!!!!happy new year,,,,,,,,,,,,,,,,,,,,, by the way one question is 57 Chevy in the background, the red and white beautiful card two door four-door couldn’t make it out Samuel bacon
4 door hard top.
@@ICWeld Isaac I was born in 1955 for myself coming into the world my father bought my mother a brand new 1955 Chevy station wagon. They had it for about six months. My mother got sick of making the payments and they got rid of it so the trifives have always been the love of my heart now and how old I am told you I was older than you happy new year PS sweet ride Samuel bacon.
thats very cool, I noticed the careful outward cuts when you needed to change position, very useful tip to add to a very clean tecnique
Thanks for sharing and Happy new year to you and your family
It’s like watching a cnc machine
Such skill! Thanks so much, Issac!
your a master with that in your hands.Happy New Year
Isaac,
You sir have mad skills,
You should auction it off for charity. Thanks, Boe
I'll have to think of something. This was long time ago.
Old school Cool 👍👍👍
Cheii""" da heat made me sweat..... excellent that's excellent one good cutting....A'HO....
That was amazing, do show the end product. Happy New Year Isaac, all the best for you and your family in the new year!
Happy new year love to watch you from Virginia 🎉
Have a Happy New Year
Awesome torch control 👏👍🙏🤞🎉
You the man ICW
Incredible work as always, Isaac!
Surgical artist! Peace Brother
Hello Issac: Good to see the "Old Style" plasma table. Kudos to a Master Craftsman. Like most talented people, you make that look easy. I have enough experience to know it is not easy. I would have spent a lot of time with a hand file to just make it legible.
Beautiful. Love torch cut thing.
My mind is blown! LOVE it!
Nicely done!
Ficou especial 🎉🎉🎉🎉
Pure artisan!
You cut better than any laser......
Sir Your Just like the Bandit from Smokey and The Bandit, You Show off well. Happy New Year.... Very Skilled on the Cutter...
MM77 Approved 👍🏼 👍🏼
Mr. Isaac, U are the only cutter I've ever seen that consistently drops the cutouts with little more than a "nudge" with Ur hand/finger. That seems like such a little detail and I know it comes from having enough flame but not too much. There are probably other "good cutters" out thar, I just haven't seen them.
HAPPY NEW YEAR to U and Ur FAMILY. Let me know if U can use the lathe chuck I told you I have.
found it.
That will definitely do! So cool!
Making me feel old Issac 😊
The legion in action!