Guys, how do you like this use of a piece of steel beam? By the way, I have one more piece left. Do you have any ideas what interesting things can be done?
Uma serra meia-esquadria para esmerilhadeira... genial!!! Só falta fazer um tupia para metais com o outro pedaço... tem fresa boa aí?? 😅😅 Minha neta gosta de ver quando faz brinquedos para as crianças... 👍
Well done video. Nice use of the car hub for the turn table mechanism. This would be a nice addition for cutting small items that are difficult to hold in place on my big metal chopsaw. I use car rear hub and spindle assemblies to make super strong gate hinges.
Man I was really hoping this would be a home made grinder for sharpening knives or actually putting an edge on new knife blanks for cheap ...... Any chance you would be willing to do that next I don't know a lot about metal fabrication but I feel like this could easily be turned into one
As for the remote power switch, install a junction box to the beam, with a 3conductor cord, an outlet to plug the grinder in & a switch to turn it on and off. Had a similar situation, built a portable table for my mini disc/belt sander on one end, 6" dual bench grinder on the other. I made the choice to hardwire both to the JB because they both had switches. So I added two outlets to the box.
Foot pedal for power. You can buy 1 that is ready to go. All you do is plug the tool into the pedal, and plug the pedal into the wall. If the power switch is turned on, you can step on the pedal to turn it on. When you're done using the tool you can turn the tool off and the pedal will cease to function.
Yes, it’s very cute and nice, but I would expect most people would spend the money to buy a cheap cut off saw instead of investing all that time and energy I would rather make other things I think but at least you do nice work 👍
Я, просто, ногой наступлю и отрежу уголок не хуже тебя. Этот агрегат потом надо где то хранить, чтобы еще раз что то отрезать. У меня это хранить негде, мне это не подходит.
Why hasn't anyone done this before? You know why? Because you can buy better tool in each store on the corner, for less money that you spent on thos thing, less effort, and much better parameters than this thing! This is fckn nonsense
Guys, how do you like this use of a piece of steel beam? By the way, I have one more piece left.
Do you have any ideas what interesting things can be done?
Гора родила мышь
🤩🤩🤩
That is an awesome idea and really good fab work. Ill have to make one for home
A truly remarkable act of creative workmanship. You're a craftsman, not just a doer.
Que preciosidad..... Un afectuoso saludo.
Hi. Excellent use of an old steel beam. I like how you transform ordinary things into interesting devices 👍
Very cool! I always enjoy seeing the tools you create. 🙂
I am very glad that you liked it! Thank you for your high appreciation👍
@jodilea144 created or copied from others?
A nice wee project, and as a bonus, I don't feel so bad about my welding any more.
Wow 🤩
Celle-ci je l’enregistre pour m’en faire une semblable… merci mec!
Your work is always clean and on point. And such a great tool for the shop; well done
Excellent.
Very cool! I always enjoy seeing the tools you create.
Awesome work, Vanya! Nicely done! 😊
Stay safe there with your family! 🖖😊
*I always love how we have to wait until the very end to know what it is that you are making 🙂 A mobile Mitre angle grinder machine 🙂.*
Uma serra meia-esquadria para esmerilhadeira... genial!!! Só falta fazer um tupia para metais com o outro pedaço... tem fresa boa aí?? 😅😅 Minha neta gosta de ver quando faz brinquedos para as crianças... 👍
Muy inteligente e interesante
Well done video. Nice use of the car hub for the turn table mechanism. This would be a nice addition for cutting small items that are difficult to hold in place on my big metal chopsaw. I use car rear hub and spindle assemblies to make super strong gate hinges.
Excellent useful tool ❤
Man I was really hoping this would be a home made grinder for sharpening knives or actually putting an edge on new knife blanks for cheap ...... Any chance you would be willing to do that next I don't know a lot about metal fabrication but I feel like this could easily be turned into one
Thanks for your comment. I'm glad you liked it. I'll think about how to do what you described!
Bravissimo!!!
Very compact!
Super nice work my friend!👍
Very nice !!
Those markers are amazing. Where do I get some?
You did a great job on the design and fabrication of that metal cut-off tool.
Thank you for your assessment. I like to do and invent something new
Very nice hob 👍
You could sharpen chainsaw chains with this setup. Just make a holding device for the chain.
Hi. Thanks for such good advice, maybe I'll do it someday!
As for the remote power switch, install a junction box to the beam, with a 3conductor cord, an outlet to plug the grinder in & a switch to turn it on and off. Had a similar situation, built a portable table for my mini disc/belt sander on one end, 6" dual bench grinder on the other. I made the choice to hardwire both to the JB because they both had switches. So I added two outlets to the box.
very cool!
Holy crap. You truly are a creative genius. Well done. Bty, how do you plan on replacing the hub bearing when it goes bad? Lol. Just kidding.
For the top bolt holding side grinder, use the handle that came with it. Then you don’t reach over to push down.
Foot pedal for power. You can buy 1 that is ready to go. All you do is plug the tool into the pedal, and plug the pedal into the wall. If the power switch is turned on, you can step on the pedal to turn it on.
When you're done using the tool you can turn the tool off and the pedal will cease to function.
Давно всё это есть
Wouldn't be a bad idea to delete those hood laces when working around power tools in the shop.
That piece of metal cuts like butter 😂😂😂
🙏👏👍💪
Yes, it’s very cute and nice, but I would expect most people would spend the money to buy a cheap cut off saw instead of investing all that time and energy I would rather make other things I think but at least you do nice work 👍
Столько железа и усилий всего лишь для крепления отрезной машинки. А можно было сделать из трех деревянных брусков...
Parabéns ficou ótimo. Gostaria de saber qual o nome dessa peça que você utilizou
The I-beam or the old front axle hub?
@@akbychoice: antigo cubo do eixo dianteiro , é de veiculo ? obrigado por responder .
Надо делать искроуловитель, а в целом излишне громоздкая и без протяжки
Серьёзный девайс
OK, it’s a cool tool, but I wanna know where he got the white felt pen that dissolves metal from… was it Q from James Bond
Just buy a radial saw
Chances are it has been done before and you just copied it.
Not a steel beam. Thats a pathetic steel beam. So thin!
What is it then?
Knee brace or short span yea flimsy
He is a wizard with those zip discs
Beauty Job bud sign him up 😮
Я, просто, ногой наступлю и отрежу уголок не хуже тебя. Этот агрегат потом надо где то хранить, чтобы еще раз что то отрезать. У меня это хранить негде, мне это не подходит.
Why hasn't anyone done this before?
You know why? Because you can buy better tool in each store on the corner, for less money that you spent on thos thing, less effort, and much better parameters than this thing! This is fckn nonsense