Hi just came across your series of videos on the work you have done on the crossman ratcatcher i realise these were done about 4years ago are you still around i would be very interested to chat to you with a view if possible of getting one of these conversions look forward to hearing from you best wishes dave
How big is the outer diameter on the transfer port valve you have made and the length of it please. Might buy the metal tube and make one or a metal rod and bore it out and then thread it? Thanks
Thank You for this very informative video !!!! ....... i seen a fellow build a valve from the rear end of a Discovery valve with the front portion of a 2240 valve ... would you consider this doable ?
Do you make all these and if so do you sell any of them. Love your video and although I been a hunter since I could walk I've just been bitten by the airgun mod bug.
Dang you bout made a new gun. Very nicely done but I don't have any of the tools you have does anyone make these? I have always believed these air pistols are deliberately underpowered.
Thanks for a great vid.. I have those boss valve mods myself. But I have issue though when pumping the powermax hipac I can hear the air go in to the hipac but then straight through the valve and out the barrel? I was only told to change the valve seal that came with the hipac and put a little but of oil on the outlet and that should be only to screw in and start pumping. Well have done that but air is just going through it? Do you have any suggestions and what did you have to do before installing the powermax hipac? Thanks for any help with thus issue also?
Hi it’s a simple solution cock the pistol so that the hammer is back, then pump the hipac. The reason is the hammer is pushing against the stem valve so it slightly opened and releasing air.
Hi Thank you for another very informative video , I am planning on switching my 2250 from co2 to air , at the moment I'm still planning my modifications . I noticed on your valve you still had the old tan seal in place , I was told that the seal had to be replaced with a one for air ? So is it okay for me to just use the standard valve seal ?. Sorry if it's a stupid question
hi the little tan seal will work on air to about 1200psi, with the Hipac pumped at 2000psi than yes change the seal to a stiffer one. my seal came with the power max hipac.
If you are in the uk and this air rifle isnt on an FAC then it must be illegal... 850 fps with a 16 grain pellet is 25 ft lb.... way over the legal limit... I would be very careful advertising those mods with those figures on here....
Nice video, and no fcking mucic. I made a new boss valve to my 2240, with the spring outside the chamber. I also 3D printed the air outlet for full flow. The valve is 10mm longer than the original, so i had to modify the end cap for the co2 cartridge to. imgur.com/a/brlXrSU
These mods I made was trial and error, my vids are for demonstration purposes only. As for a business, I don’t want the responsibility if something goes wrong.
@@mpk5959 I was being selfish I just want all your toys mate. Yeah I saw how Alex was blamed for an accident that happened with a hipac. I understand why you dont. Also I've had a hipac for ages, and never had a problem, the guy that had the accident modified the hipac, which is a no-no.
your best bet is to get a real 22lr barrel and machine it with all the proper dimensions to fit perfect fully back in ,i have heard people using a brake liner for autos and stainless tubing ,as long as it chambers ,drill the tubing slightly bigger for 22lr and there you have it ,a screw driver tip will make an awesome firing pin.i have often thought as a teenager to drill my pellet rifles out to accept a .22lr lol .look what this guy has accomplished with his upgrades ,pure genius !!!
best ive seen so far on modding the 2240 ,pure genius man ,job overly well done !!!
Jeez due cute your finger nails, so creepy
Really? Maybe he is a classical guitar player. Should keep your judgemental thoughts private.
Great idea, now discover a nail clippers...sheeesh, those things are creepy!
I would assume he plays Guitar.
He told you in the video that he plays blues guitar. Observation skills!
Thank you very much, incredible improvements, great work !
Brilliant!!!
Just going to have lunch, then I'll do this before tea....
Brilliant, brilliant, do you plan to mass produce these parts for the 2240?
Awesome I sure can use your parts for my 2240,I just bought one so excited and your parts would be Killer thanks
Cool mod! Now mod some nailer clippers
Read his s description
Excellent mods .. liked n subscribed 👏 👍 👌
Hi just came across your series of videos on the work you have done on the crossman ratcatcher i realise these were done about 4years ago are you still around i would be very interested to chat to you with a view if possible of getting one of these conversions look forward to hearing from you best wishes dave
Best mod video I have seen for years grand job
Excellent video. Great job. Thanks.
How big is the outer diameter on the transfer port valve you have made and the length of it please. Might buy the metal tube and make one or a metal rod and bore it out and then thread it? Thanks
How much for the threaded transfer port??? Pure genius!!! Reduces chances of leaks and it increases safety. How much???
How is the Transfer Tube sealed, at the threaded end, and at the top?
Is there no power limit for Air/Gas Pistols in your Country?
Do you make modifications to other people's guns that are not handy enough to do the modifications themselves
If I send you my disassembled 2240 can you build it just like the way you did yours's or can you build me the parts for mine?
Thank You for this very informative video !!!! ....... i seen a fellow build a valve from the rear end of a Discovery valve with the front portion of a 2240 valve ... would you consider this doable ?
No pin = more volume in the valve.
finger picks...
Where can I buy the 2000 - 3000 psi air tube from ?
hoi, zijn de onderdelen ook te koop?
Do you make all these and if so do you sell any of them. Love your video and although I been a hunter since I could walk I've just been bitten by the airgun mod bug.
Dang you bout made a new gun. Very nicely done but I don't have any of the tools you have does anyone make these? I have always believed these air pistols are deliberately underpowered.
Thanks for a great vid.. I have those boss valve mods myself. But I have issue though when pumping the powermax hipac I can hear the air go in to the hipac but then straight through the valve and out the barrel? I was only told to change the valve seal that came with the hipac and put a little but of oil on the outlet and that should be only to screw in and start pumping. Well have done that but air is just going through it? Do you have any suggestions and what did you have to do before installing the powermax hipac? Thanks for any help with thus issue also?
Hi it’s a simple solution cock the pistol so that the hammer is back, then pump the hipac. The reason is the hammer is pushing against the stem valve so it slightly opened and releasing air.
loverandjoy can you get 12ftb
@@mpk5959 Ok thanks. Have now tried the high pack it with 4500 psi which works quite well.
coool;;double jointed thumbs...
Great video
Are these mods available to buy?
Also I shoot my high pack at about 3.500 psi to 4.500 psi but never to much over that limit that gives you enough power for a 22 cal 5.7 gr pellets.
Did you selfmade tuning parts! ? Or sompfing did you bay!?
hi all modified parts you see on my channel are made my self.
What is a safe wall thickness to leave on the valve when boring out
Hi , I need a longer barrel , where can I buy this? In Ebay, can you pleas recommend a good seller! Thanks!!!
awsome build were can i get the highpak from
thanks for your time
everything you need to know about the hipac is here www.network54.com/Forum/665650
Hi Thank you for another very informative video , I am planning on switching my 2250 from co2 to air , at the moment I'm still planning my modifications . I noticed on your valve you still had the old tan seal in place , I was told that the seal had to be replaced with a one for air ? So is it okay for me to just use the standard valve seal ?.
Sorry if it's a stupid question
hi the little tan seal will work on air to about 1200psi, with the Hipac pumped at 2000psi than yes change the seal to a stiffer one. my seal came with the power max hipac.
Thanks 1200psi, will give me a chance to give mod's a good try out .
Thanks again for your great video's
I like it, well done, what is the tube dimentions , steel grade please?
2240 - 8 3/8" Long, 7/8" OD, 0.065" Wall, 0.745" ID, 13/16-28 x 1/2" Thread.303 stainless steel
Hi, may i know where can i buy the hipac cylinder?
High peak armoury
If you are in the uk and this air rifle isnt on an FAC then it must be illegal... 850 fps with a 16 grain pellet is 25 ft lb.... way over the legal limit... I would be very careful advertising those mods with those figures on here....
Its a shame you dont post more videos your content is bang on buddy pure genius
How many shots do you get from the hipac ?
About 20 good shots with one extension.
Can you buy steel bolts. If so could you or anyone point me in the right direction please
Nice video, and no fcking mucic.
I made a new boss valve to my 2240, with the spring outside the chamber. I also 3D printed the air outlet for full flow.
The valve is 10mm longer than the original, so i had to modify the end cap for the co2 cartridge to.
imgur.com/a/brlXrSU
No need to modify the chamber if you remove the needle....???
Could you make me a valve with screw in transfer port? Great design that
Please tell me you are going into the Air Mods business, awesome ideas/awesome work my brother!
These mods I made was trial and error, my vids are for demonstration purposes only. As for a business, I don’t want the responsibility if something goes wrong.
@@mpk5959 I was being selfish I just want all your toys mate. Yeah I saw how Alex was blamed for an accident that happened with a hipac. I understand why you dont. Also I've had a hipac for ages, and never had a problem, the guy that had the accident modified the hipac, which is a no-no.
Could you do this to the XS-78 Valve ?
Yes
HOW MANY FPS U GET WHEN U DO THIS
with the hipac in that stage about 840 fps.
where is the valve body O-ring? how to stop air over the valve body?
Hi can i buy your parts for my 2240 ?
nice work very professional and I don't think your power adjuster looks naff at all,nice one,atb dave
The power adapter might look naff, the whole thing is covered and not seen by putting on the stock.
where can I buy the kit?
Hi i made all the parts in this video, these parts are not for sale sorry.
👍👍😀
Subscribed
You can make a piece of Crosman 2240
Shame we can’t do this sort of thing in the UK, without having to get a Firearms Certificate.
Sure you can
Is it possible to use 22lr bullets with this gun?
I would Not recommend it at all.
thanks for answer is there any airgun u can recommend for 22lr?
your best bet is to get a real 22lr barrel and machine it with all the proper dimensions to fit perfect fully back in ,i have heard people using a brake liner for autos and stainless tubing ,as long as it chambers ,drill the tubing slightly bigger for 22lr and there you have it ,a screw driver tip will make an awesome firing pin.i have often thought as a teenager to drill my pellet rifles out to accept a .22lr lol .look what this guy has accomplished with his upgrades ,pure genius !!!
Just buy a .22 Caliber Rimfire Rifle!
Can we start a gofundme for some nail clippers? 🤢🤮
Would you like to mod my pistol?
wsrtętne paznokcie
Bro... maybe invest in a nailclipper first...
.plz can i have one of ur custom airgun 😁
P