Logic Pro #30 - Automation (Volume, Pan, Aux Tracks, Sends, Plugins, Instrument Parameters)
HTML-код
- Опубликовано: 28 июл 2024
- In this video, I demonstrate the following:
1. How to hide and show track automation.
2. How to use volume and pan automation.
3. How to use various tools to writing in offline track automation.
4. How to use aux track volume and send level automation.
5. How to use plugin parameter and software instrument parameter automation.
6. How to fade out a song with the master VCA.
Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor
For mixing/mastering work, contact me at my website | carneymediagroup.com
Follow MusicTechHelpGuy on Instagram | / musictechhelpguy
Support the channel on Patreon | / musictechhelpguy
Demo project used in this video | www.logicproguide.com/downloads
#logicpro #logicprox #tutorial
Timestamps:
0:00 Introduction
0:53 Sponsor Segment
1:43 Volume Automation
5:26 Tools for Automation
9:39 Pan Automation
12:51 Multiple Tracks, Fine Adjustments
14:28 Aux Track Volume Automation
16:39 Send Level Automation
19:23 Plugin Automation
23:04 Software Instrument Automation
25:10 Song Fade Out (Master VCA)
Best Logic Pro channel hands down.
Josh! How cool was this video. I have struggled for such a long time with automation! But I am truly lost for words now! At last! I understand! I can do it! All thanks to your superb, concise and easy to follow tutorials. This one is bang at the top of my saved ones from you and just know I’m gonna be referring to it all the time.
This is GOLD! Thank's a lot for that bright, clear and straight to the point vid !!
Click-and-hold, then hold control while moving the automation to slow down and better control the movement... you always include a detail that blows my mind!
This was super helpful. I've been fiddling about with automation and making a mess. You helped me get a better grasp of how this works. I'm going to have to watch this a few times, and I'm subscribing.
There is a better way to select an automation parameter instead of switching to touch and back to read: Mix -> Autoselect Automation Parameter in Read Mode
I'll make sure I show that in #31. Thanks.
Amazing! Thanks for sharing
Omg, thank you! I’ve been looking for that! ❤
I shifted from cubase to logic , your tutorial videos are helping me alot , You’re a saviour man thanks a ton 💕
Watching your tutorials always inspires me to open Logic... i appreciate these very much!!!
🔥🔥🔥
Great video as always! A fast shortcut for using the Automation Curve Tool: when using the Pointer tool in the Automation lane, hold control shift and the Pointer will turn into the Curve Tool
Absolutely great as always, thanks !
Muy buen trabajo, y muy valioso. Gracias!!!🙌
Cor josh, great works, this really clarified a lot for me, what a genius tool Logic is.
Been a fan for years. Great videos .... that master fader tip.....💯
That Touch thing for automating plugins is golden, ty!
THANK YOU!! Extremely helpful!
thank you so much for this video! i've encountered such helpful videos like this where every detail is explained in an easy way! ❤
Thank you for these videos! 👍🏻
Amazing lessons! Thank you!
man, I just started using logic last month, this video has been really really helpful , learned a lot. Thank you
Dude this was so helpful! Thanks for the video!
youre the best josh! ive watched so many of your vids that i feel like we're friends! stay cool!
Excellent, as always! The big takeaway for me was accessing automation on plugins. Thank you!
I learning from you a lot! Thank you!
Thanks for this video. Unreal there is not that many well articulated Logic Pro demonstrations.
As usual Fantastic. Thank you so much. 👏👏👏
Good stuff, man, thank you!
I thought I knew what there was to know, but I was mistaken! So much more! Especially about automation of SENDS and EFFECTS. Great instructional video. I agree -- best Logic Pro channel in the 'verse.
Everything I needed to know and more.
Very useful, thanks!
That THIS has been very helpful 🙏🏾🙏🏾🙏🏾
MusicTechHelpGuy 🙌Thank you! exactly what i have been looking for! 🙌🙏
Great content! Thanks so much!
Insanely helpful
17:20 FINALLY i've been looking EVERYWHERE for this answer. also i was searching exactly there but for some reason i didn't see the little arrow next to main lol. thanks!
Fab! Thanks so much.
Elite as always mate. Control click was what I was looking for, was struggling to get gain plugin back to 0dB straight away by dragging as the increments were too big on my laptop (small screen size). Learning plenty from you lad
Thank you my dear friend
In this video, I demonstrate the following:
1. How to hide and show track automation.
2. How to use volume and pan automation.
3. How to use various tools to writing in offline track automation.
4. How to use aux track volume and send level automation.
5. How to use plugin parameter and software instrument parameter automation.
6. How to fade out a song with the master VCA.
Support the sponsor of this video, Boombox | bit.ly/boomboxsponsor
For mixing/mastering work, contact me at my website | carneymediagroup.com
Follow MusicTechHelpGuy on Instagram | instagram.com/musictechhelpguy
Support the channel on Patreon | patreon.com/musictechhelpguy
Demo project used in this video | www.logicproguide.com/downloads
Timestamps:
0:00 Introduction
0:53 Sponsor Segment
1:43 Volume Automation
5:26 Tools for Automation
9:39 Pan Automation
12:51 Multiple Tracks, Fine Adjustments
14:28 Aux Track Volume Automation
16:39 Send Level Automation
19:23 Plugin Automation
23:04 Software Instrument Automation
25:10 Song Fade Out (Master VCA)
amazing!
damn this guy is badass!!! thanks for your help and contribution to the music production industry!!
It's knowledgeable important video 👍😊
Wow, Josh! Had no idea how deep (offline) automation could go. This opens up all new avenues of mixing production for me.
I’m looking forward to the next drop. 👍🏼
Gianni
Very useful vdo az usual...tanXxx a lot...lotzzz of love from India l🇮🇳..!!
great video. really
Well, you just prove me how to make a perfect dj mixtape in logic ! thanks a lot 🍺🍻🍺
A quite new topic for me. The only thing I used already is the Master fade-out. But the rest was is almost unknown an I must admit I didn’t understand everything. I will have to watch this Modul more often. In any case it’s very interesting. A 30th big „Thank you“. I think it’s very important to know much about automation.
Think about it as programming parameters to change in your mix, but rather than manually making the movements yourself, you program the DAW to do the work for you. On early mixing consoles automation didn't exist, so you would often have to make multiple "passes" of riding faders and turning knobs to get instruments to sit right in the mix. Later on they introduced moving faders on some Neve consoles, and you could program in the motions, and the faders had motors that could replicate the motion. This is essentially just a software version of that, using your mouse to program the automation changes. The next video is on real-time automation, so maybe it'll make a little more sense after that one.
@@MusicTechHelpGuy Thanx so much for this quite time consuming answer in this case, because I know you‘ve got more than 300.000 subscribers…. 👍🏻
w video thanks allot man
For some reason I don’t feel the urge to skip the sponsor part on your videos XD. Been busy with life now I can get back to supporting my favorite teacher.
Yes! Boombox made this series happen. I never skip it either.
😁 Same here!
Same here also
Wish I could give this Video multiple Thumbs-Up..THANKS for the insightful tips and sharing your vast experience with the viewer like myself..like to bottle Josh and drink him down, but until then ill watch and learn..thx
This is brilliant. I have a question. I noticed that you did not adjust the dial of a bus itself. I noticed that the dial of the bus opens or closes depending of the automatization. I always though that the adjustment of a bus's dial is only related to the amount of effect we want to be affected independently from the amount of automatizations we adjust. I hope this question make sense and thank you.
How do you raise & lower the volume of the entire track that you’ve applied automation to?
how can i just turn an effect on for one bar, like a phaser on a guitar?
is it possible to automate switching a preset of a plugin? let's say I want to switch to a specific clean guitar tone from distortion tone without individually adjusting all the parameters in multiple automations. Is there a way to switch to already saved preset during automation?
Once you automate the volume you can't use the fader anymore. In the past when I needed to bring the entire automated track down I'd add a gain plugin and use that. Is there a better way?
Nope. Adding the gain plugin at the end of the channel is the best way. That’s the way I do it.
Isn’t that what the ”Relative” automation is for (instead of choosing ”Absolute”)?
@@MusicTechHelpGuy I have the same question. Do you never use the "relative" option with automation? It seems to me that that would solve this problem! I don't like how you lose control over the fader when you use automation. With "relative" the fader position still matters.
Pro tools has a channel that you can create called master mix giving the user full control over all tracks to change the volume levels for each track at once with the slider, keeping your mix volumes in tack on each track.
How do I find this and create it for a project in Logic 11?
why does it keep making a spike when I drag down the automation point to make a square?
how do you make an automation square?
Is there a way to adjust automation by smaller degrees? I find it jumps by, say, half a db or more at a time when dragging. Can I do it by 0.1 increments?
Do you have a video on how to "Reamp Guitar in Logic Pro X?
Not yet, but I should probably make one.
I'm a little let down that you explain everything in such detail but when you get to panning almost nothing. That's exactly what I'm looking for is a good explanation of automated panning. I need to take 3 tracks (in a stack, or individually) and go slightly to the right then 1/2 way to the left then hard right. And I still have no idea how to do this.
Good video for everything else though.
I want to automate a parameter of a plugin that I have on the Stereo Out. Doesn't seem to work there like on a track though? Any suggestions?
right click on Stereo out in the mixer and select "add track" this will create a track for stereo out. Now.... go and select that track on the left track list.. should appear at bottom... and than you can automate anything that is on stereo out just as with any other track.. as example select the stereo out track... select touch from automation mode.. and move any parameter of its plugins or mixer settings.. than just tweek to your liking🖖🐙😊
When you have volume automation on a track, then move the fader for that track in the mixer for an overall lower level, does it change the automation or does the automation take over and negate your new fader setting? I ask because sometimes I want to change the volume on all my tracks simultaneously if the overall mix is too loud (overload) or too quiet, while keeping the Master at zero.
Great question! I experienced that volume automation overrules the fader and I want to know how I can work around that. Is there a way to make volume automation relative to the fader volume?
What I typically do is add the Gain plugin to the end of the plugin chain, and use that to add or boost the volume a bit if I need to make volume changes, after writing automation.
That’s exactly what I do, but then I end up with a second screen filled with Gain plugins that I have to adjust individually. I’d like to be able to bring up or down all the tracks at the same time. Are you listening, Apple?
I do the opposite. I use a gain plugin to make the automations so I can always adjust the main volume of the track with the fader. Other times I simply use a track stack to change overall volume for one or several tracks at a time (that has already been automated).
The only downside of that is that you’ve “used up” a track stack. I believe you can only have two levels of track stacks (a stack within a stack) at the moment. And since I love using this functionality, I always end up “using them up” 😅
Man, this is driving me nuts. When I edit automation (in my case mod wheel for dynamics on a string library) and then move the mod wheel data up or down (vertically) it compresses the data... so as I move up, it increases the height between top and bottom of the data, and as I move down it decreases the height of the data. All I want to do is move it up and down without this compression! Is there a way to do that?
Replying to myself incase anyone else is struggling with this. I just found out that when you grab a node (the dot) it compresses/expands, but if you grab a line connecting the nodes (often have to zoom in to see the connecting lines) then the whole group of data moves up and down without compressing. So glad to have figured that!
The demo file seems to have expired... :(
Does anybody know of a faster way to get to the specific parameter within a VST/effect? In Ableton Live you can simply click a parameter and it shows up in the automation lane. Do you need to go through the “touch” function to get there? I would love to just shift-click the parameter or something. It is just sooo fast in Ableton, and I want the same functionality in Logic 😅
Go up to Mix > Autoselect Automation Parameter in Read Mode. As long as the track is in Read mode, you can simply click on a knob or fader in any plugins or instrument and it will automatically show up as the automation parameter on the track.
@@MusicTechHelpGuy I actually found this in a comment further down. An absolute lifesaver! 😍 This has already saved me half an hour total today while doing some sound design with tons of automation. Thank you for creating this awesome community!
Why are the pan numbers not the same? (63/64)
Great question! Logic started off as a MIDI workstation way back in the day. So all of Logic's knobs and faders, and other controls are based on MIDI CC values which are 0-127. So including the zero, the range of 0-127 is 128 total discrete values. 63 + 64 + 1 (center) = 128. That's why it's lopsided by one value, and why it doesn't use 0-100 like some other DAWs.
@@MusicTechHelpGuy That's actually kinda cool. Thanks!
❤👍🎙
Is it just me or Automation is clunky and like there is a delay on it compared to other DAWs
I have a M1 Mac and even moving automation lines around are fluent.
Am I doing something wrong ?