Buy it here on Amazon: Honeywell Home Wi-Fi 7-Day Programmable Thermostat (RTH6580WF), Requires C Wire, Works with Alexa amzn.to/2S3pwGY Visit My Amazon Storefront & Shop Here: www.amazon.com/shop/weldingandstuff/list/33ZAPVK89CF67?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_SHX0GYWYA7P0V4SG1HXC
This is what I needed.. awesome. We just bought a house with the same thermostat and there’s no manual.. finally I can setup my thermostat. Thanks for the video.
This is the best video that I have watched. It has a lot of very good, detailed information and not a lot of Showboat. Thank you for making this video.
I hope you see this you’re the only video on here that explains how to do the settings and I live here in Florida and something happened and all the settings got messed up. Thank you and God bless you.
Ah, my hero. I changed routers and worked for three days trying to set up my existing 6580. NOTHING worked. The part of your video that helped me was the left number settings. For some reason I could not read "39," no matter what I did. I did not think it was prudent for a user to mess with those numbers but I saw you reach "90" as a complete reset and decided to try that. IT WORKED. I am set up now. Much thanks. Honeywell was no help...John
Thank you for this video!!... got a new wifi router and I messed up the settings trying to install it ... your video saved my family as we are expecting a low of 7 degrees tomorrow; THANK YOU!
You’re a lifesaver man thank you. I lost my manual and i was trying to figure out how to program it for the auto setting. I’ve got a newborn and our temperature here in TN fluctuates pretty hard this time of year.
Thank you very much! Very detailed and informative. Switched cable providers and had to reset wifi, honeywell support was no help at all. Best tutorial!!!
Man, I been messing with my thermostat for 2 weeks. Temperature been holding at 74 all day then around 4 pm it starts to climb to 79-80 then at some point after 9 pm it drops to 74 again. When we wake up it’s 74 and the cycle begins again. Your instruction clearly explains what I need to be looking at. Thank you.
Thank you! For some reason I couldn’t figure out that I had to set up the automatic change over from ac to heat. This should be already set to automatic change over.
Heyyyy Houstonite. This is the first video I found, trying to connect my Honeywell wirelessly. Made me laugh with your comment about 50 degrees, then 90 degrees in the same day. So true. Hahahaha.
Thank you … I’m getting a recovery indoor alarm and heat is kicking on before scheduled time. Set the 16 - 0 option as you explained hopefully this works. On hold with Honeywell for an hour.
On my Th 4210 how do I get into "settings" and then "preferences" then "smart response technology" to turn "recovery mode" off (and to turn off "energy saving mode" ? Thanks
This is a great video, but what is the issue when you have just installed this thermostat, the screen came up briefly and then disappeared. I have removed the thermostat from the back plate several times... each time the green screen comes up and says wait... but then it dies again, and is not responsive. My house is way to warm, and I cannot turn the heater down or off. Does that sound like a wiring issue? Hope you can respond tonight. But if not, please respond when you can.
And I have the exact thermostat that you do here problem I’m running into is number 39 won’t go back to one from zero. Do you know how to make it do that
Very nice tutorial sir. I just bought a house with this thermostat in it and have no manual. I may reach out to Honeywell and see if theyll send me one. How do you adjust the time? I didnt see that as a number setting.
Can I set an alert (email or text) for the thermostat to tell me when it's above or below a certain temperature in the house? That's the main reason I bought this but I don't see that capability. Seems pretty basic. If not, what stats will do this as I need it to monitor remotely?
@@weldingandstuff u might have to login to their site/app from your desktop/laptop. I have a Honeywell and just had this experience. The app on my phone didn't have the alert setting but the desktop version of site did.
I live in South Florida and would like the thermostat to stay at 75, but I'll put it there then after a few hours it jumps up to 78. I didn't see you address how to do that, or maybe you did and I missed it.
I have the same thermostat works for heat and not air will turn on fan when I turn central air on so wondering what I have done wrong? I have a 2 stage variable speed furnace and a 16 seer 2 ton Frigidaire central air unit. Any ideas on how to help. By the way you should do all the videos for Honeywell this was awesome
Buyer beware, Honeywell thermostats keep your house within 1 degree temperature, they don't advertise it in any way I have found, that causes your heater and ac to cycle a lot, when it turns on, not only does it use more energy then when it's already running, it puts much more wear on your pump and motor, I had to talk to one of their techs to find this out! All these people spending all this time to find out it's factory like that. I loved it other than that!
THANK YOU for this video. I saw this one on sale for half off and wanted to grab it to replace the glitchy Nest I have, and I was wondering if it could be set to Auto and have the smart pre-heating and pre-cooling mode.
Buy it here on Amazon: Honeywell Home Wi-Fi 7-Day Programmable Thermostat (RTH6580WF), Requires C Wire, Works with Alexa amzn.to/2S3pwGY
Visit My Amazon Storefront & Shop Here: www.amazon.com/shop/weldingandstuff/list/33ZAPVK89CF67?ref_=cm_sw_r_cp_ud_aipsflist_aipsfweldingandstuff_SHX0GYWYA7P0V4SG1HXC
This is what I needed.. awesome. We just bought a house with the same thermostat and there’s no manual.. finally I can setup my thermostat. Thanks for the video.
This is the best video that I have watched. It has a lot of very good, detailed information and not a lot of Showboat. Thank you for making this video.
You produced an EXCELLENT descriptive video brother man.
The manufacturer should include this with every purchase.
Thanks !
*Works as expected **Fastly.Cool*
I hope you see this you’re the only video on here that explains how to do the settings and I live here in Florida and something happened and all the settings got messed up. Thank you and God bless you.
Glad it helped!
Ah, my hero. I changed routers and worked for three days trying to set up my existing 6580. NOTHING worked. The part of your video that helped me was the left number settings. For some reason I could not read "39," no matter what I did. I did not think it was prudent for a user to mess with those numbers but I saw you reach "90" as a complete reset and decided to try that. IT WORKED. I am set up now. Much thanks. Honeywell was no help...John
Thank you for this video!!... got a new wifi router and I messed up the settings trying to install it ... your video saved my family as we are expecting a low of 7 degrees tomorrow; THANK YOU!
You’re a lifesaver man thank you. I lost my manual and i was trying to figure out how to program it for the auto setting. I’ve got a newborn and our temperature here in TN fluctuates pretty hard this time of year.
Mannnn this video saved me I didn’t know about the heat pump settings nor the factory sertings my ac was blowing 88 degree air for 2 weeks . Thanks
Glad to help
Thank you for this video. Very helpful and got my air conditioning working again. You're a life saver!!
Glad it helped!
Thank you!!!! The master reset is an important function. My upstairs one wasn't allowing the ac setting, just heat. Master reset brought it back
God bless you brother, you saved me twice! I appreciate your efforts
Glad I could help
Wow. Very very good job going step by step. 🙏
Thanks! Had my units for a few years and didn’t know about some of these features!
Sir, thank you for taking the time to school me on the settings. Much appreciated. Godspeed!
Thank you very much! Very detailed and informative. Switched cable providers and had to reset wifi, honeywell support was no help at all. Best tutorial!!!
Thanks for the video. You answered my questions about programming this unit.
Thank you sir! Got mine programmed like yours and it worked.
Man, I been messing with my thermostat for 2 weeks. Temperature been holding at 74 all day then around 4 pm it starts to climb to 79-80 then at some point after 9 pm it drops to 74 again. When we wake up it’s 74 and the cycle begins again. Your instruction clearly explains what I need to be looking at. Thank you.
You might think you can fix it but just call someone they can fix that or find the issue for you there is a lot more to it. I do hvac btw🙂
Very useful. Very professional. Great video. Thank you
thanks Brother my Auto changeover was off was I wondering why my schedule wasn't kicking in. Thanks again
Thanks for this helpful video. Just installed my thermostat
Thank you! For some reason I couldn’t figure out that I had to set up the automatic change over from ac to heat. This should be already set to automatic change over.
Heyyyy Houstonite. This is the first video I found, trying to connect my Honeywell wirelessly. Made me laugh with your comment about 50 degrees, then 90 degrees in the same day. So true. Hahahaha.
Thank you, this was very helpful! 😁👍
Glad it was helpful!
Thank you brother for this video it really helps me finish my project you’re a Godsend
Thank you for this helpful video! 🙂
Thank you … I’m getting a recovery indoor alarm and heat is kicking on before scheduled time. Set the 16 - 0 option as you explained hopefully this works. On hold with Honeywell for an hour.
Thank you for your video. easy for understanding.
Easy to understand, thanks.
Thank you! This was very helpful!!!
Very well explained. Thank you
On my Th 4210 how do I get into "settings" and then "preferences" then "smart response technology" to turn "recovery mode" off (and to turn off "energy saving mode" ? Thanks
Hey thanks very much I was getting frustrated and you helped me get it. Thanks Much Tom
Thanks for the info!! I really appreciate it!!
Thank you for simplifying how to program this thingamagig
Well done. I just subscribed. Thank you for your work.
thanks
Great video pal. I needed that assistance.
Thank you for taking the time to make this very helpful video. Huge help, bless you.
thank you sir. excellent video
This is incredible!
This is a great video, but what is the issue when you have just installed this thermostat, the screen came up briefly and then disappeared. I have removed the thermostat from the back plate several times... each time the green screen comes up and says wait... but then it dies again, and is not responsive. My house is way to warm, and I cannot turn the heater down or off. Does that sound like a wiring issue? Hope you can respond tonight. But if not, please respond when you can.
Thanks for the help
And I have the exact thermostat that you do here problem I’m running into is number 39 won’t go back to one from zero. Do you know how to make it do that
great video!!!
Can u change cycles per hour?
Thank you!! 🤩
Thank you so much!
Very nice tutorial sir. I just bought a house with this thermostat in it and have no manual. I may reach out to Honeywell and see if theyll send me one. How do you adjust the time? I didnt see that as a number setting.
Thanks for the share!
Can I set an alert (email or text) for the thermostat to tell me when it's above or below a certain temperature in the house? That's the main reason I bought this but I don't see that capability. Seems pretty basic. If not, what stats will do this as I need it to monitor remotely?
I looked but it don’t send text or email alerts.
@@weldingandstuff u might have to login to their site/app from your desktop/laptop. I have a Honeywell and just had this experience. The app on my phone didn't have the alert setting but the desktop version of site did.
Bless you man❤
Thank you. Very useful!
Hi. Can you adjust the max temp so my tenants can’t put up to 90?
So helpful! Appreciate you!
I live in South Florida and would like the thermostat to stay at 75, but I'll put it there then after a few hours it jumps up to 78. I didn't see you address how to do that, or maybe you did and I missed it.
Use the app and set to permanent hold
I have the same thermostat works for heat and not air will turn on fan when I turn central air on so wondering what I have done wrong? I have a 2 stage variable speed furnace and a 16 seer 2 ton Frigidaire central air unit. Any ideas on how to help. By the way you should do all the videos for Honeywell this was awesome
How do you lock the thermostat
Buyer beware, Honeywell thermostats keep your house within 1 degree temperature, they don't advertise it in any way I have found, that causes your heater and ac to cycle a lot, when it turns on, not only does it use more energy then when it's already running, it puts much more wear on your pump and motor, I had to talk to one of their techs to find this out!
All these people spending all this time to find out it's factory like that. I loved it other than that!
Can you please make a video on how this hooks up to WiFi?
YES, PLEASE!!!!
He already did. Search his videos
It was pretty good. I just need to know how to get rid of daily temp. Mine is too high.
THANK YOU for this video. I saw this one on sale for half off and wanted to grab it to replace the glitchy Nest I have, and I was wondering if it could be set to Auto and have the smart pre-heating and pre-cooling mode.
Great video
Hi, thank you for the great video. Can you direct me to a thermostat that will allow me to program when the fan will come on and off?
How do you lock this thermostat
My thermostat keep blinking saysing no singal for heating mode
Try taking the face cover off for about 39 seconds and then put it back on
Has anybody ever had the problem of not having the number 39 4 Wi-Fi I had it that one time and I can't my programmer jumps from 38 to 42
We never got the set up instructions
cool thanks
Does this not have a backlight?
my Wi-Fi didn't work
👍👍
👍💯
Thompson Thomas Miller Ronald Johnson Linda
I wish you will just show how to set it up from beginning, you reading the manual and is too much, I came to you tube so I won’t have to read manual☹️
Great video