Must have network cabling tools Updated
HTML-код
- Опубликовано: 4 июл 2024
- In this updated video I go through the cabling tools I use when onsite a job. Amazon links below for tools used in this video
Klien cable scissors:
amzn.to/32GKdjF
Cable Comb:
amzn.to/3zabIOA
Cable Toner:
amzn.to/3Fy7WkF
EZ-RJ45 crimping tool:
amzn.to/3sI1XGv
Cat 6 RJ45 passthrough:
amzn.to/3pzCOvE
Clear RJ45 boot:
amzn.to/3JuGkPF
Milwaukee Packout ( didnt have the one shown in video):
amzn.to/3FD19WJ
6 inch slim patch cables:
amzn.to/3mHIB07
Vertical cable vmax cat 6 keystones (50 pack):
amzn.to/3mJgEFr
Blank keystone inserts:
amzn.to/3JoBjs3
Keystone patch panel:
amzn.to/3sIntuD
Unilite SLR-1750:
amzn.to/3HiSWHQ
Cable velcro:
amzn.to/3FGWkf6
Dremel 4300:
amzn.to/3Ex6LRj
Security tool set:
amzn.to/3Jk8cGa
J-hooks:
amzn.to/3eBmT9E
Cat 6 wiremap tool:
amzn.to/3eDOOFS
Netally Linkrunner 2000:
amzn.to/32wzY1y
Brother H110 labeller:
amzn.to/3eDPzPe
Brady BMP21-Plus-KIT1
amzn.to/3JoExvF
Vertical cable I-Punch tool:
amzn.to/3pAzMak
------------------------------------------------------------------------------------
◼️Hire us on our website
mactelecomnetworks.com/
◼️Join our discord server:
/ discord
◼️Contact me on email:
cody@mactelecomnetworks.com
------------------------------------------------------------------------------------
◼️Find us on social media:
◾Instagram:
/ mactelecomnetworks
◾Facebook:
/ mactelecomnetworks
◾Twitter:
/ mactelecomn
◾TikTok:
/ mactelecomnetworks
Linkedin:
/ cody-maccallum-29311b6b
------------------------------------------------------------------------------------
◼️If you would like to support the channel I have an Amazon storefront below:
◾Canadian Amazon Store front:
www.amazon.ca/shop/mactelecom...
◾USA Amazon store front:
www.amazon.com/shop/macteleco...
Intro 0:00
Cable scissors 0:30
Cable comb 0:58
Cable toner/tracer 1:23
RJ45 criper tool 1:49
Packout box 2:37
Keystone patch panel: 3:37
Unilite 4:14
Cable Velcro 4:40
Dremel 4300 5:16
Cable j-hooks 5:58
Cable testers: 6:14
Cable labellers 8:29
Vertical cable I-Punch tool 9:43
Final thoughts 10:40 
Наука
Great Video. At work today, we were looking through our tools and seeing if we needed better ones. We are using a number of the same tools you are and are ordering better ones. I will run this video by the team to see what they think.
I’m sure there are better tools than I use as well. It’s all just personal preference
Great Video Cody, nice selection, I like the Pockethernet tool also
If I lived in Canada I'd be sure to use you for work at my home
You sure know your stuff mate.👌💯🇬🇧
Not a bad list, though you should learn how to use lineman snips. I have the exact snips and they are called comfort grip snips, because the yellow pvc covered handle is meant to sit in your palm of your hand. Your middle finger goes in the regular scissor handle, with the other section in your palm. This allows you to have a ton of leverage cutting cables. Category cable is easy to cut, but I use mine all the time for other types of cables as well.
Great video! I’m just getting started with a career shift from mining into tech. Thank you!
Thanks for watching
I've been needing a label maker like the Brady. Thanks!
The must have video for the must have tools. Excellent video.
Only good for old unshielded slow networks
@@jens2303 Most small business networks dont have standards and Certifications they must follow
You have a good channel. I have not done ethernet cable since probably 2007 when I worked a lot in datacenters for my clients. But now I am cabling my house and I'm getting back in it. Thanks for all the infos. By the way, I have a lot (25?) of different packout and they are really great. But the price is really high. If I wasn't using them daily I would have chosen something else because of the price. Have a good day, from Montreal, eh!
Good stuff thanks for sharing
I have a similar brothers printer. I can set the length manually for the labels and print very small labels. You should probably check if yours allows it. The default length is always long because it prints enough to visible show the label from the ejection part. But you don't need to see it, just push down and cut it and the tip it out into your hand. Or even consider programming it to print a set of 2 numbers for those dual or quad plates.
Yeah brother likes to do this, so i just ended up making a very long print of "LR1 LR2 LR3 LR4 LR4 LR6" and then just used scissors to cut between. no matter what field if it has to print something it will try and be a pain about it.
Good video Cody. I am a huge fan of pssthrough, have probably done over 10,000 this year not a single issue. Those Simply45 units do look nice.
Are you using yours outside? I’ve seen some where the camera was totally ruined by them ( not the simply45 pro series )
@@MactelecomNetworks You can't use the sumply45's out side with cameras because of the boots that clip over them. Haven't had one issue in 3 years using ezcrimps. I also don't put the ends out in the weather.
I've never had a problem with EZ-RJ45 outside but I always use the waterproof bushing that comes with the camera.
@@mrfrenzy. Yup, exactly me too.
Another great video. Thanks for the update, I loved first one and picked up the I-punch tool and love it. BTW ever thought of using rechargeables batteries for the label printers? I have the power adapter for my P-touch just in case but usually run off rechargeables.
For the P-touch I do use rechargeable and for the brady it comes with a rechargeable battery
Great List
I would like a video on how you organize the Milwaukee case with all your stuff
Arts and crafts snips, as I call em. Can't use those for the life of me. I love my 1010s.
Tssss, great tools
Any chance making video on management vlan for unifi!! Deep dive into it. Along with pfsense!!
Call me asleep at the wheel but I had no idea you were based in Canada and then I saw that 'Maximum' packout box and thought, hmm but when I saw the 'Mastercraft' micro bitset, I woke up as I have a few similar sets. That 'Tire' place does tend to have a few reasonably priced good tools. ;)
Yup I’m in Ontario close to Newmarket :)
Another great video! What specific labels do you routinely use with your Brady labeler? Have been looking for another labeler and the Brady line looks really promising. Thanks again for all your great videos. Still interested in an Untangle - Unifi vid if you run out of ideas for new projects!
This is the label tape I’ve been using but there are a lot of different options
amzn.to/3FIZnUb
@@MactelecomNetworks Thanks Cody!
I wasn't aware there was a tool like the I-Punch. Would have saved my hands a lot of pain doing the 30 keystone jacks in my house that I did by holding it and using a little punch tool for every cable.
It's called a puck in the industry. Order enough levitons jacks and they should include one.
Video of how you're cutting strikes?
Curious about you mentioning "I'm in Canada" regarding T568A VS. T568B, I'm also in Canada and every mentor I've had uses B since it's the "newer" / "latest" standard. Obviously it doesn't really matter as long as both ends are the same.
Well anyone who ive talked to ( At the time of this video anyways and in Ontario) are using T568a but I feel a lot of people use B as well. Like you said doesnt really matter
Cody. Can you do a video of how moisture can get into a Rj45 connector such as a camera etc? I would like to learn more about this of how moiture can effect network poe switches and cameras. Thanks!
MOisture gets in from water condensation and shorts out switch ports. I accidently cut a cable plugged in and it sparked like crazy but luckly didnt short
What Austin said. I don't think its worthy of a full video and I don't really know how I would show it anyways
@@MactelecomNetworks I agree just keep connections away from water and your good
Hey the vertical cable I punch claims you can only use their brand keystone for it. Is this true?
Do we need to seal the pass through connectors to protect from moisture?
this will toner and active network
Tone and Probe Test and Trace Kit
Brand:
Klein Tools
SKU:
VDV500-705
or this one
Noyafa NF-810 Multifunctional Network Tester， Ethernet LAN Network Wire Tracker with Telephone Line Tester , Network line Scanning, Power Cable Scanning and POE Switch Test Functions
Cody where is our 2023 into 2024 update to this video?
Did you upgrade the netally?
Do you have the link for the cap 45?
Question:
According to Simply45:
Simply45's engineers designed their crimper to be compatible with other manufacturer's connectors. Simply45's Crimper replaces tools from Klein Tools (#VDV226-110), Ideal Networks (#30-495), Platinum Tools (#100004C, #100054C, #100062C), and Eclipse Tools(#902-548T)
I happened to impulsively buy the Klein VDV226-110 crimper the other day to terminate some cable. Is it safe to assume the RJ45 plugs w/ Cap45 can be crimped with the Klein crimper?
Those RJ45 plugs from Simply45 look interesting.
I have a few questions:
- Can we use the pass-through crimper from klein tools with the RJ45 pro plugs (the ones with the ruber)?
- Also do we need their crimper in order o use their Strain Reliefs or do they just click onto the plug?
Once again, great video :)
Hey the best way to use the simply45 ends would be to use there crimper which I don’t have ( right now) and didn’t show in the video.
As for the strain relief I would assume you’re talking about the vertical cable patch panel. You can use that with any keystone
Yep the Klein tool works great with them, not sure about the stress relief I only use mod plugs for cameras and they won't fit.
What size lag bolts do you use to attach network racks to walls. I have a 6u rack that I am attaching to 3/4” plywood ( which is screwed into studs)? Thanks
Ya you'll want to have the plywood screwed into the studs for sure as for lag bolts I typically use 1/4 by 2 inches I believe and have some washers on then
Great how may i order them in Pakistan?
Soon as you finished with the link runner i wanted one. I then clicked the link in the description and saw the price. I don't want one now :/
The link runner I have is one of the cheaper ones as well. Networking test gear cost a lot
I never recommend brother label printers due to the exact same fact he mentioned, wasting so much label. Almost all models have the same problem for strange reason!
Probably because brother makes money off selling you extra label. Just a guess, don't know if they actually sell the consumables.
@@markdee3506 Yes they do sell the consumables. It's nasty way of making money, more money.
nice master-crap box! good ol crappy tire!
Hey can you use a ipad as a door display to watch door bell camera and all the security camera 24/7 ???
Can you make a video on this topic ??
you can? it all depends on your cameras though. it's very easy to do.
Maybe 🤔 won’t be for a little while though
@@MactelecomNetworks no Problem
Happy late Christmas everyone
Also dose anyone know what ports I need to open for my unifi controller on a pi to be used on different sites because I had to reset my edgerouter x because I got a new isp and can not find the doc I had from last time please
Here's a list of Unifi ports
help.ui.com/hc/en-us/articles/218506997-UniFi-Ports-Used
Old head told me to use banjo board on pairs 4r and 8r when plugged into switch
Bridle rings by them selves should never be used for ethernet cabling as they can deform the cable. Bridle rings with saddles are ok
Cable comb will have your cables lookin' better than your hair ;D
I mean I have some hair I just don’t show it 😂
I am a robot !
The netally is nice but it's not worth the ridiclous price point. It's just an android with a case (bad battery) and some free apps.
I think its priced reasonably they have other models that can do a lot more ( 10GB testing, Certification, Heatmap scans etc)
The AT-2000 is NOT Android based. It boots up almost instantly and is good value second hand. It does seem overpriced new, especially as it’s now quite an old product. However the time it may save you on site may pay for itself very quickly.
However the newer more advanced NetAlly products ARE Android based.
Show up at my place with a backwards hat you would be dismissed immediately
Cool you’re the type of person I wouldn’t want to work for so works out for both of us
Also you should probably not judge people on appearance there is a reason I wear a hat