bin 36 und schneide haare seit ich 13 bin, hatte bis jetzt super taper. genialer maschine, gestern aus neugier wide detailer bestellt heute angekommen. klein ist sie, schneidet sehr smooth und ist leise ganz einfach zu bedienen....danke für das video hier zero overlap ist drinne ^^
Hi, habe den Wahl Detailer gekauft und Zero Overlap auch eingestellt, nur schneidet die Klinge in die Haut...die rotierende (obere) Klinge steht auch nicht über...
I have noise problem to my wahl series .. that started when i opened the clipper and take off the wire .. perhaps the power cord should not be completely tight??
i didn't inderstand why he did that , can any one tell me plz ? and what's the length before and after i read that the default length of cutting it is 0.04 MM
How does your blade look like? Do you have the regular blade? (Not the T-Blade) Maybe this video could be helpful: ruclips.net/video/WZm5HCe9aY0/видео.html
I did this, and my face was hurting a bit afterwards. I made sure I did it on a flat surface, even did a 20° tilt to make sure it’s not fully 0, any help?
On soft skin the skin can rimple. It's not recommended in the neck. The surface on the head is mostly flat and tight. Thats why for barbers its very chill to have this zero overlap
Coloque las cuchillas como muestra el vídeo quedan a ras pero cortan pelliscan.... A parte ví un vídeo donde recomiendan lijar las cuchillas con la máquina prendida que me recomiendan lijar las cuchillas o no colocarlas a ras
Dont use too much pressure when using it. If your heavy handed it's not wise to zero gap your trimmer. Always leave a slight gap. Use your fingernail at top of blades to feel slight gap.
Please help!!! My detailer works well without screwing the blade on.When I screw it on,the motor slows down to the point where it almost stops! I have adjusted the blades well like demonstrated on this video but still it when I turn it on It seems like it doesn't have enough power.Can somebody please help me before I decide to return it back?
Hello. The blade might be rusty or not cleaned properly. The motor needs way more power to run a dirty and especially rusty blade. Please oil it properly, clean it and try it again.
@@charlesalbertespinosamunoz9156 NOOOOOOOOO!!!!!! ABSOLUTELY not!!!!! if you do that way, you will dull the blades!!! whoever did that way, is the most stupid person ever!!! if it is biting, the problem isn't with the sharpness of the blade. the problem is that the cutting blade is extending over the top blade. that is the stupidest thing vlive ever heard!!! please, do NOT do that!!!
Actually he is not and you’re a idiot! If the moving blade is not below the fixed one with like 0,2mm, it will scratch-cut-hurt your skin!... especially on your neck where the skin is more softly. Did it both ways 10 min ago with mine and .... you’re an IDIOT!:))
I bought mine on Amazon two years ago, but I can't find it on Amazon now. This video shows you that it only comes with the black detailer, but that makes zero sense to me. ruclips.net/video/yOZ5UYq5xQE/видео.html
Can somebody please tell me how to NOT zero-gap the Wahl T-Wide blades? I would like to know how to put a normal, slight gap on these blades. I have very sensitive skin, so a normal, slightly separated T-Wide (or any) blade is perfect. If I'm not mistaken, I remember a yt vid where a guy takes a trimmer blade set to a mirror and pushes it straight down on the mirror and continues to push with light pressure while placing it at an angle causing a slight gap in the blades. It might seem like I have no trouble recalling the vid, but it's so vague that I would need to watch it again to do it correctly. And that's if the memory I'm recalling isn't confabulation, lol.
My Wahl trimmer came with a special tool to adjust the blades. If you don t have that tool, you’ll have to loose a little those two yellow screws and lower the moving blade with 0.2 mm below the fixed one using your eyes amd fingers.. so, MANUALLY. Its not really hard, i’ve did it in 5 min;). Good luck!
Wahl GmbH I have but it just seems as if the metal is digging into my fingers. I have the 8081-917 model if that makes any difference? I will try again but I doubt it will come off.
Well, possible reasons for your issue are: Rust, Dirt or missing blade care. How often have you oiled it? My sugestion, put your screws back on, oil it propperly, let the blade run for a while, oil it again, unscrew the blade and try to pull as hard as possible. You should also consider to get yourself a new bladeset. To avoid this kind of problems, oil the blade after each cut. I hope this will help.
Because you can clearly see in the still image after adjusting that the smaller moving blade is completely and outrageously crooked. And zero gapping blades are never actually 0 overlap, that would cut the skin on any human being. The smaller, lower blade should be just a hair shorter than the top stationary blade.
bin 36 und schneide haare seit ich 13 bin, hatte bis jetzt super taper. genialer maschine, gestern aus neugier wide detailer bestellt heute angekommen. klein ist sie, schneidet sehr smooth und ist leise ganz einfach zu bedienen....danke für das video hier zero overlap ist drinne ^^
Hi, habe den Wahl Detailer gekauft und Zero Overlap auch eingestellt, nur schneidet die Klinge in die Haut...die rotierende (obere) Klinge steht auch nicht über...
Faxx😂
@@bozoqturkmni8137 konntest du das Problem lösen? Will sie mir vielleicht kaufen
Perfect , short and simple with no stress
ruclips.net/channel/UC2e2RJBDfO8MK93ATH2V-EQvideos
I tried 0gapping them after seeing this and somehow made them worse lol, so after a few lineups with it I tried it again and now it's hitting lovely 👌
Thanks ,Would the cutting blade screws loosen overtime through vibration or there is safety mechanism to keep the screws in place?
When I do the zero overlap and I am shaving, my teeth angle become crooked. They are not straight. Does this mean I need to tighten the screws more?
Loosen it again and try to straighten it then when tightening the screws do it gently so that the blade remains in the same straight position
Very satisfaction tutorial video!
best trimmer i have it iam from morocco
Can i zero overlap my wahl magic clip ?
It"s useful.Thank you so much.
I have noise problem to my wahl series .. that started when i opened the clipper and take off the wire .. perhaps the power cord should not be completely tight??
i didn't inderstand why he did that , can any one tell me plz ?
and what's the length before and after
i read that the default length of cutting it is 0.04 MM
Anyone know how to do it for the cordless 5 star version? Mine has a different interior design....
Any videos for the spring and pastic.
my blade doesnt look the same. I can't zero gap them. The only reason I'm trying this is because my detailer cuts so dull
How does your blade look like? Do you have the regular blade? (Not the T-Blade)
Maybe this video could be helpful: ruclips.net/video/WZm5HCe9aY0/видео.html
Wahl GmbH thank you!!
I did this, and my face was hurting a bit afterwards. I made sure I did it on a flat surface, even did a 20° tilt to make sure it’s not fully 0, any help?
On soft skin the skin can rimple. It's not recommended in the neck. The surface on the head is mostly flat and tight. Thats why for barbers its very chill to have this zero overlap
@@paultijgers yeah it hurt the most on the neck, the face was fine, I’ll not use it on the neck from now on
@@paultijgerso it is ok to use for part of the head to start a fade?
Coloque las cuchillas como muestra el vídeo quedan a ras pero cortan pelliscan.... A parte ví un vídeo donde recomiendan lijar las cuchillas con la máquina prendida que me recomiendan lijar las cuchillas o no colocarlas a ras
I just ordered one few days ago. What is the reason we need to adjust it? Is it for cutting hair shorter or longer?
It makes it cut hair even shorter. So when u are doing a shape up or line up it's a lot sharper
@@abidrahman8495 does it cut the skin?
@@paveljakl yes
My wahl detailer hurts and cuts the skin producing red lines. How can I fix this?
Mohammed Chowdhury move the blade a bit further in, but no too much. About 0.2mm. So it doesn't make contact with the skin.
@Mohammed Same here. Did you fix this problem?
Dont use too much pressure when using it. If your heavy handed it's not wise to zero gap your trimmer. Always leave a slight gap. Use your fingernail at top of blades to feel slight gap.
Same i sold this pos
@@jbli19 it shouldnt do it out the box if we didnt even zero gap them why would we need to fix there problem🤷♂️🤦🏻♂️
how to recognize an original wahl detailer trimmer?
Nice tutorial
Hi, I have purchased Wahl Detailer Li do you sell the tool for this in the UK?
What size is the screwdriver???
I did it but after a few haircuts it doesn't cut at all.how can i fix it??
What name guard wahl zero overlap setting? How much?
Me sirvio un monton! Buen video
Hola ... Compré una igual ... Ajusto las cuchillas a ras pero pelliscan o con tan ... Se colocan a ras o no?
Please help!!! My detailer works well without screwing the blade on.When I screw it on,the motor slows down to the point where it almost stops! I have adjusted the blades well like demonstrated on this video but still it when I turn it on It seems like it doesn't have enough power.Can somebody please help me before I decide to return it back?
Hello. The blade might be rusty or not cleaned properly. The motor needs way more power to run a dirty and especially rusty blade. Please oil it properly, clean it and try it again.
ruclips.net/channel/UC2e2RJBDfO8MK93ATH2V-EQvideos
Which one gives a better head shave (bald) the Wahl Wide Detailer OR the Wahl Legend?
_Andis_ question has yet to be answered 😏
What does zero overlap mean?
Merci beaucoup
Do you have a vid to zero gap the razor edger?
What size screwdrive
the blades are so sharp, that it bites my customers when I set it this way.
Same. I couldn’t even touch it against my neck when zero gapped
@@TONY-dq1pk but what about when they aren't hitting anymore and you need to adjust them again? Edit: Aren't hitting
zero gap shouldnt bite generally speaking.
@@REPINSTR8BAMA ví un vídeo donde recomiendan colocarlas al mismo nivel y prendida la máquina pasarla por una lija delgada... Que recomiendas?
@@charlesalbertespinosamunoz9156 NOOOOOOOOO!!!!!! ABSOLUTELY not!!!!! if you do that way, you will dull the blades!!! whoever did that way, is the most stupid person ever!!! if it is biting, the problem isn't with the sharpness of the blade. the problem is that the cutting blade is extending over the top blade. that is the stupidest thing vlive ever heard!!! please, do NOT do that!!!
I cannot get mine right. Help!!!!! The bottom blade should be extended past the top one?
it should be levelled with the fixed blade but not going over it.
KarlIsYourPapi Thank you. Is that the same principle for regular clippers?
It hurts after you done
but i thought they come zero overlap??
Not all the time mate
very helpful video.thanks a lot Wahl Gmbh
Vamoaber capas le salgo a una, despues te cuento gringo .Gracias por el video cortito y al pie .
How to cut customer skin.... nice video
Your a clown
Actually he is not and you’re a idiot! If the moving blade is not below the fixed one with like 0,2mm, it will scratch-cut-hurt your skin!... especially on your neck where the skin is more softly.
Did it both ways 10 min ago with mine and .... you’re an IDIOT!:))
can I use this machine on direct current?
No we are sorry. AC only.
but why lol
this adjustment of the kkk blades was all wrong. cut a customer right
"kkk"blades? LOL.
They have a zero gap tool specifically for the detailer now. No sense in risking cutting of your clients.
I bought mine on Amazon two years ago, but I can't find it on Amazon now. This video shows you that it only comes with the black detailer, but that makes zero sense to me.
ruclips.net/video/yOZ5UYq5xQE/видео.html
They "used" to come with a zero gap tool but since Wahl widen the blade, they don't come with them anymore
You won't cut anyone if u try it on urself first, ofcourse that is entirely up to you.
Il faut faire de la mécanique presque pour utiliser sa tondeuse
Can somebody please tell me how to NOT zero-gap the Wahl T-Wide blades? I would like to know how to put a normal, slight gap on these blades. I have very sensitive skin, so a normal, slightly separated T-Wide (or any) blade is perfect.
If I'm not mistaken, I remember a yt vid where a guy takes a trimmer blade set to a mirror and pushes it straight down on the mirror and continues to push with light pressure while placing it at an angle causing a slight gap in the blades. It might seem like I have no trouble recalling the vid, but it's so vague that I would need to watch it again to do it correctly. And that's if the memory I'm recalling isn't confabulation, lol.
My Wahl trimmer came with a special tool to adjust the blades. If you don t have that tool, you’ll have to loose a little those two yellow screws and lower the moving blade with 0.2 mm below the fixed one using your eyes amd fingers.. so, MANUALLY. Its not really hard, i’ve did it in 5 min;).
Good luck!
@@laurentiumatei111
Thanks for the help, I appreciate it, bro!
I didnt know this, why doesnt wahl tells this in the manual?
because it would be like recognising their products are or will go out of calibration over time.
these are corded trimmer?
obviously :-)
My blade doesn't come off when I undo the screws?
have you tried to pull harder?
Wahl GmbH I have but it just seems as if the metal is digging into my fingers. I have the 8081-917 model if that makes any difference?
I will try again but I doubt it will come off.
Well, possible reasons for your issue are: Rust, Dirt or missing blade care. How often have you oiled it? My sugestion, put your screws back on, oil it propperly, let the blade run for a while, oil it again, unscrew the blade and try to pull as hard as possible. You should also consider to get yourself a new bladeset.
To avoid this kind of problems, oil the blade after each cut.
I hope this will help.
Wahl GmbH doesn't come off. I've opened it up completely, won't come off. Is there an email address I can send pictures to, to explain better?
Sure! Send your E-Mail to online-marketing[@]wahlgmbh.com and I will take care of it.
Teşekkürler başbakanım
Kardeş, bende enseyi alırsam eti kesiyor, sende durum nasıl?
What's the price
170 dollars
Is crooked
Thank
welcome! :-)
You over did it
Doing this will cut the hair shorter, sorry not a professional just have the same product
Not hurt skins?
If done right, it won't hurt the skin.
474th like and 41st comment so early lol:-)
سعر كام
Li itabelesmon
🤝🏾🫡
👴➡️👩🦲 👍
This video is a joke right??
even though we are funny fellows - IT'S NOT!
Because you can clearly see in the still image after adjusting that the smaller moving blade is completely and outrageously crooked. And zero gapping blades are never actually 0 overlap, that would cut the skin on any human being. The smaller, lower blade should be just a hair shorter than the top stationary blade.
ok
Vrau sieu ocomaand
How do clean it when mine looks dark and almost rusty?
tokenrow669 buy a new blade
U should oil them up every so often bro
@@jayhari1713 Were to get new oil if its run out?
@@DJYAD19 u can most likely get new little bottles of oil at any store that sells those kinds of barber tools. Or I'm sure Amazon probably sells em
I have WAHL 300 that is so sharp! it cuts & hurts, how to fix that please?
The bottom blade that's closest to the guts of the machine can't be past the top blade. U can dial it back the same probably
Any videos for the spring and pastic.