Scaffold Board Tool Tote
HTML-код
- Опубликовано: 16 сен 2024
- Hello and welcome to Badger Workshop. The awesome makers set the scaffold board challenge. My entry in a tool tote made from a single 2.5m board.
/ badgerworkshop
/ badgerworkshop
www.badgerworks...
Love the addition of the tape measure holder. Very nice little project!
Thanks boys
Excellent. This is exactly what I was looking for. My next project for sure. Cheers, mate!
I have built so many things and have been wanting an old school tool tote and I think this is the one I want !!! Thank you for sharing Love the extra touch of the tape measure spot. So nice
Thank you very much
Really nice project mate, love the use of the leftover steel strap as a tape holder.
Thank you. I had to think of a way to use it.
Howdy from Corpus Christi Texas. Outstanding video 👍 👍
Love your builds! Well done! 👏🏻
Thank Carl
I’ve used these boards a few times for larger projects but you’ve inspired me to do something prettier. Absolutely love this. (Need me a planer!)
The planer is a great tool. Makes cleaning up rough boards so quick
Badger Workshop Is the Triton up to it? Now you have the DeWalt?
thank you for creating this. Most comprehensive and helpful. I only have hand tools and it'll take me a tad longer as I'll be using wood I've felled in my garden. But it will be made with love
Love the colour and the symmetry of the dowels !!! Nice project !
Thank you very much
Very nice matt , turned out very well.
Thank you
Lovely tool tote that Matt. Like the branding tool. 👍🏼
That’s really cool, the touch at the end for the tape holder was genius.
Thank you Richard. I had to come up with a use for that part.
Nice! Loved the tape holder at the end - great little touch. Thanks for sharing badger boy 😘🌲🦊🌲
Thank you woods lady.
Love the look of this man, good job 👍🏻
Thank you very much
Mate, that's a beefy tote for sure. Seriously last the distance and then some. 👌
Nice touch with the metal tag for your tape measure. Well done, looks awesome. 👍
Thank you very much Bill
Nice job Matt, good to see your workshop tools improving too.
Thank you. I keep upgrading
Came out very nice! Great addition the tape holder!👍
Thank you very much
Cool-looking and very handy tool tote, I like the dedicated holder for the tape measure
Thank you. I tried to use all of the material.
Badger Workshop Hadn’t noticed yet that it was the strip from the scaffolding board, that’s even cooler!
That’s bloody lovely Matt 👍🏻👍🏻👍🏻
Thank you
Brilliant Matt really like that.
Thanks Dave
Absolutely beautifully made👍
Thank you very much
I like your entry, I imagine that the scaffold was around £15 and I think you've made something worth far more. If you like using the hardwood dowels I can't recommend enough making a simple V jig that slides in the track of your bandsaw. I've ruined many before when the blade rolls the dowel.
Good idea. I will put it on my to do list.
Absolutely Beautiful. Cheers my Friend. 👍
Thanks Tim
Some nice touches there with Cooper pipe and tape measure holder.
Thank you John.
Top notch Matt, I’ll shout you a beer or seven at the local mate 🔨🔨👍👍👍
Look forward to it
Love your videos, so calm and chilling... Gonna try this
Thank you. Hope yours turns out good.
Very nice make love use of copper for the handle sweet
Thank you very much
Nice one Matt!👍👍👍👍👍👍👍
Thanks Alan
❤JOLLY GOOD THERE MATE❤
Hey Matt, I love your remark at 3:45 : "I like a project that doesn't make any noise . . . . " Challenge for next time??
Basicly the only tool you used that actually didn't was your finger spreading the glue :). We'll just leave out the electrical saw, table saw, thickneser, bandsaw, drill press, dowel jointer, bandsaw and electrical saw again, tacker and an orbital sander which you require hearing protection for . . . .
I do like the tote though.
Really like that matt very tidy
Thank you
This has inspired me to make my own copying yours apart from i ripped everything down to reduce the weight.
Great video.
Thanks James
Looks great! Nice project
Thank you Keith.
That's cool mate - I was trying to figure out what the tape measure was on instagram - couldn't see clearly and thought it was a bottle opener. Nice!
Thank you Rob
Wow, this looks so nice and it turned out great. Too job ✌
Thank you very much
Fabulous project simple in design and structure
Thank you Barney
Nice project!
Thanks
Nice project, I wonder how heavy it is without the tools? A little tip you could have used 25mm Galvanised Steel conduit for the handle with brass female bushes on the ends. Keep up the good work Matt, I have been reorganising my workshop and have made a mobile stand for my table saw which now fits into my workbench, haven't quite mastered the art of video yet.
It’s not bad. Scaffold board are pretty light. Steel would have worked well.
I always look out for new videos from you Matt, and often re-watch older videos. I have just finished re - watching your shepherd's hut series, and was wondering how long it takes you to build one. Regards, Alan, and please keep the videos coming.
Thank you for watching. I worked everyday on it for about 4 weeks
Badger Workshop Thanks for reply, Matt. Regards, Alan , nrn .
Very nice indeed
Thank you
That's a tote that should be with you into your sunset years Matt. Like the reinforced copper handle. The end caps set it off real nice. Using a bit of the edge banding for a tape holder was a neat idea. Good job.
On a side note, I don't know why but it always cracks me up when you hammer in a nail. You've got a real "just get the #$@! in there" style that just tickles me. No offense meant of course. I'm far from a one-clout master like the boat builders I did my time with! All the best.
Thank. Wait until I get a framing nailer then you won’t see me with a hammer agin
That’s fantastic. Could you tell me the brand and colour of the hard wax oil? Thanks
Love the posh voice, see you on site mate 😉
Nice job,but I would have preferred it if you had used a old scaffold board,but it is well made,and gets my thumbs up
Thanks Colin
Nice !!!!
Thanks.
Nice design. Can you tell me the dimensions.
Beautiful work, Matt! Really well done! 😃
Just one question... I'm starting with woodworking and I heard a lot of people talking about grain direction and so on... So, how did it hold up the time?
I'm curious because I want to make one as well and this seems like the correct way. (Unless you use plywood, what I don't want to! 😬)
Thanks a lot! 😊
Stay safe there with your family! 🖖😊
It is over three years old now and has held up fine
Loved this video. Subscribed. Very well. Its a shame I struggled to find the same finish as i loved the look thanks!
Now for the silly comment. I saw this video toting around on my subscription page so I thought I would give it a watch.
Two comments for the pics of one video. I feel honoured
hey matt! great video! I have a question... where did u get that custom branding iron?
That looks Great Matt, Yes where did you get the iron please?
Thank you. It’s from someone on the woodworking uk Facebook group. You will need to join and ask on there.
Excellent as always Matt I have wondered - how did you get hold of the railway track piece?
I knew a blacksmith who gave them to me. I have seen them come up on eBay.
That is a VERY sexy handle!😀
Thank you. I do like copper
Hows the new Dewalt mitre saw Matt is it the 1800 watt version? What happened to the Evolution ? Sorry for all the questions.
I have both still. I think it’s the 1400 it seems a good saw so far. Nice and compact
hi badger workshop brill video where did you get your branding iron from thanks nick
Thanks. It’s from a chap off the woodworking uk Facebook group. You need to ask on there about them.
Nice job Matt, what blade do you use on the bandsaw for general use?
Thanks you. It’s a 4 tpi 3/8 from tuff saws
Tough enough for anybody.
That ain’t going to break anytime soon.
No it’s pretty stout
good work man!!! :-)
Thank you very much
Love it! Where did you get your branding iron?
dragonflies_workshop on instagram
Where's the old bit of railway line you use as a stop block???
I still have it. Such a useful tool
Where did you buy that scaffold board? Builders merchant?
I have a Bunnings near me and got it there. They will all be closing down soon though.
@@Badgerworkshop thanks :)
Do you not have the metabo HC 260 planer anymore ?
I do
@@Badgerworkshop ok thanks for taking the time to reply . I'm extremely tempted to buy the metabo but I just can't seem to make my mind up . Do you have any niggles with yours ?
It’s not perfect. But the next level of machine up seems to be twice the price
2 Jimmy Diresta call outs in one video. You fanboyin'?
Shocking I know. Don’t tell him.
Well at least you will not have to go to the Gym for a work out, just carry your tote a round for a day