Raise3D Pro2 / Pro2 Plus bed leveling and calibration - OKM3D

If you want to know how to calibrate the build plate on a Raise3D Pro2, you should watch that video.
For more information visit the support page of Raise3D:
support.raise3...
Here a link to the Pro2 series:
www.raise3d.co...

[@TheCarbonGuards]

And six hours later, your bed is mostly level.
What’s the video doesn’t tell you is that you need to do this with the bed hot because the raised bed works. In addition to that you have to be careful because the gantry X and Y has a lot of flex in it, which is unbelievable for a $6,000 machine. ($1200 machine in a $6,000 body) so if you’re not careful, you will raise the print heads on the gantry thinking your level, to find that when you remove the feeler gauge your nozzle is touching the bed.

[@evilbabai7083]

That is so true...

[@razieeldenogean3258]

Me has resuelto mi problema jeje excelente video!!!

[@dereinzigwahreRichi]

That was actually really helpful, contrary to the content provided by Raise Academy...big thanks!

[@coastaltechnologies2329]

this is word for word copy and pasted from the official raise guide

[@dereinzigwahreRichi]

@@coastaltechnologies2329 ...which in turn tells us that Raise isn't able to make a video following their own instructions. Must be different people writing and making the videos there.
I never said it was original, I just found it helpful. I was right by the printer and was looking for a video showing the procedure, not a lengthy manual to read, so this was good for me.

[@kasekuchentv7869]

I get quite anxious when I see you pressing on that display as if you wanted to poke a hole in it...

[@timmeybt]

At least the machine can stand the pressure ;-)

[@Bruno-P]

Such a shame a 7000 dollars printer doesn't come with auto bed leveling

[@timmeybt]

Raise3D agreed: while the Pro2 did not have auto bed leveling, the newer Pro3 does!

[@TheCarbonGuards]

Most $1500 machines did years before the pro three did.

[@CDCLLC2023]

That is the truth. WTF?

[@ispalin4667]

👍