Great video, Saved my A** for sure. Battery pushed up on screen and slightly ripped cable, i ripped it more taking screen off. Lots of pitfalls in this repair.
Would you be so kind to list the type of materials used to perform the soldering portion? i.e. type of flux, solder wire, temperature setting, etc..Thank you in advance
I have a stainless steel series 0 with a blown microphone.. i found a replacement but i can’t figure out if it’s replaceable by “an human being” or not :)
My series 1 crown dial was different then in your video. Yours had a silver insert that you unscrewed with the pliers but mine is black and doesn’t seem to unscrew. Video is top notch tho. Everything was smooth up until I got to removing the crown.
I was replacing my battery and took the screen off for the adhesive, at 0:49 where you take off the screen with the two connectors and the bracket on top came up to reveal the 4 solder points, I didn’t think much of it till I put it all together and it buzzes but the screen is unresponsive and I think it’s becuase I lifted that piece up off the solder points but I’m not sure can anyone help?
Hello, I am following this video and all was going on until one of the screws (the one in the corner where the taptic is holding down the logic board ended up stripped. I can't get it out. I tried the rubber band idea, I tried gluing in a screw driver too and didn't work. I am at a stand still. How does one get a stripped little screw like this out?
Il terzo flat che hai risaldato come si chiama? Intendo quello che quando viene piegato si trova sotto gli attacchi dello schermo e ha 4 punti che si saldano
I’ve done exactly the screen change,. But the new screen some times is Bright normally but wen I try to fix in the frame with double face glue, the display get not bright, may be there’s a problem in the flax cable to the Main Board ? What is the spare part the some time cause Display is working but not Bright? It appear like a 30% to de real bright. And doesn’t matter try to go to adjust to put +++ bright , because it do not affect the display to work as a 100% off bright ! Any suggestion ?
How much would you charge to repair the lcd connector in a 38mm Series 1? I accidentally ripped it smh 🤦🏼♂️ I was like it’s fine until I found out it has to be resoldered.
Trust me this is the best iwatch video i found in RUclips.Ur video should get millions of views.
It's a shame this video doest have more views. Good job man!
Josiah Schickler I appreciate it Josiah
Agree with Josiah. Right light, right angles, right about everything. Amazing video! Thanks dude!
Great video, Saved my A** for sure. Battery pushed up on screen and slightly ripped cable, i ripped it more taking screen off. Lots of pitfalls in this repair.
Would you be so kind to list the type of materials used to perform the soldering portion? i.e. type of flux, solder wire, temperature setting, etc..Thank you in advance
Muchas gracias por tu video, me sirvió de guía .ya que en la actualidad ya este modelo esta descontinuado.
this is the most professional video instead subscribe hope to see more..
Hi,What temperature should I set on the soldering iron?
which screwdriver was used to remove the digital crown?
I have a stainless steel series 0 with a blown microphone.. i found a replacement but i can’t figure out if it’s replaceable by “an human being” or not :)
My series 1 crown dial was different then in your video. Yours had a silver insert that you unscrewed with the pliers but mine is black and doesn’t seem to unscrew. Video is top notch tho. Everything was smooth up until I got to removing the crown.
I was replacing my battery and took the screen off for the adhesive, at 0:49 where you take off the screen with the two connectors and the bracket on top came up to reveal the 4 solder points, I didn’t think much of it till I put it all together and it buzzes but the screen is unresponsive and I think it’s becuase I lifted that piece up off the solder points but I’m not sure can anyone help?
could you tell me what the name and size of this key you used to unlock the pin from behind?
Hello, I am following this video and all was going on until one of the screws (the one in the corner where the taptic is holding down the logic board ended up stripped. I can't get it out. I tried the rubber band idea, I tried gluing in a screw driver too and didn't work. I am at a stand still. How does one get a stripped little screw like this out?
Hello bro 🤚🏻
How much cost for strip ( display & touch connector strip ).
Il terzo flat che hai risaldato come si chiama? Intendo quello che quando viene piegato si trova sotto gli attacchi dello schermo e ha 4 punti che si saldano
I’ve done exactly the screen change,. But the new screen some times is Bright normally but wen I try to fix in the frame with double face glue, the display get not bright, may be there’s a problem in the flax cable to the Main Board ? What is the spare part the some time cause Display is working but not Bright? It appear like a 30% to de real bright. And doesn’t matter try to go to adjust to put +++ bright , because it do not affect the display to work as a 100% off bright ! Any suggestion ?
Hi . Where i can buy only thé lcd ??
Hey sir. Where do you get parts. I nicked the motherboard on the watch taking out the batt. Used the wrong tool.
Can you fix my Apple Watch 44mm I was trying to replace my lcd and broke the ribbon cable that connects the lcd
Gerardo Avila yes I can. If you still need this repair let me know
What’s the price
FIXD he can u fix my I watch 44 mm fist gen
Hi, good job. Where to buy the key for Digital Crown?. thanks
Witch website can I get the series3 motherboard to buy ?
What do you use in 7:15 ? Is this alcohol?
Flux, www.mobilesentrix.com/mechanic-iphone-cpu-dedicated-soldering-flux-no-225-10cc
How much would you charge to repair the lcd connector in a 38mm Series 1? I accidentally ripped it smh 🤦🏼♂️ I was like it’s fine until I found out it has to be resoldered.
Can you fix my 42mm series 1? I was trying to change the Lcd and got the connectors broke.
what tool did you use to unscrew the digital crown?
U-shaped tip or screwdriver
Could you please show me how to repair my mic it stopped working
jose luis morales I have other videos that will give you the info you need to fix it
Very helpful
The crown is stuck on mine how do I unscrew it
Epic Win Face Pie you need a small wrench to hold like in the video. I had to make mine.
Does Replacing the Logic Board Remove ICloud lock?
Yes
Every the ad says it is!
"music" makes it hard to hear narration ! Leave it out, it's annoying.
Shoot your contact info I need my I watch fix
Fixdirepair.com