I had my apple watch s3 repaired due to water damage to an accredited apple shop. The technician did this and replace the flex ribbon. It took him 2 hours to finaly fix it. It cost me USD 100.
Hi, on 2:18 you remove that tiny sticker on the back of the flex. On my series 3 this covers all 3 lines of the flex. While chaning the LCD this sticker crushed in position of the screw. After putting in the new LCD my screen still stay black, I sent back the display, got a new one but still the same .. maybe cause of this sticker ? Or any other ideas ? Thanks !!
Have you found a solution for your problem? My sticker crushed in the same position, the screen works but my force touch doesn‘t work anymore (with old and new sensor)
Very carefully. 😂 the truth is that if you have the contacts tinned properly without too much or too little solder, once it gets hot enough to flow, surface tension will pull it into place as long as it’s close. Better towards too little solder than too much
Wiem wiem, sam ostatnio wymieniałem taśmę w 3ójce i właśnie pod mikroskopem, dlatego podziwiam kolesia za wzrok i łatwość w jaki sposób on to zrobił hehe Oglądam tych „rzeźników” Hindusów i mam czasem lekki uśmiech na pysku, patrząc jak oni to naprawiają 😁 Najlepiej jak robią projektory 😅 Dosłownie, jakby skuter pod domem se robił 💪 I najciekawsze to, że naprawiają i to działa 🫣😜 Ja jak robiłem iwatcha (jestem amatorem) to musiałem mieć zestaw chusteczek, żeby pot z czoła wycierać 😅 pozdo
Can you please show how to fold the flex cable and attach the the metal plate to the power button, my cable was cut and the video doesn't show how you did it on the new cable.
hi bro, do you have store? or online shop store? i don't know the problem of apple Series 3, i change already the following: LCD assembly & New Battery, but until now is not Working? do you have any Suggestion! Thank you so much.
He set the sides in place first. There is also a hole in the flex cable that I’m certain is key. As long as you have the contacts properly tinned and it’s lined up close enough, the heat will cause the solder to flow and actually pull it into place. If you can get the first three or four attach this way, than they should all end up lining up.
You’d be surprised how long I did this creating more work for myself trying to get things perfect and hold them in place before realizing that the surface tension of the solder will actually do the work for you. Holding it still ends up actually being counter productive a lot of times. This is especially true with hot air
Hi,
can you please list the materials that you used to remove the LCD flex connector and reapply the flex cable connector
Transparent stuff is flux
I had my apple watch s3 repaired due to water damage to an accredited apple shop. The technician did this and replace the flex ribbon. It took him 2 hours to finaly fix it. It cost me USD 100.
can you please list the materials that you used to remove the LCD flex connector?
Hi,I have an Apple 3 series watch and right side of the touch screen does not respond.LCD is working and has no Dead pixels.Any toughts?
Hi, on 2:18 you remove that tiny sticker on the back of the flex. On my series 3 this covers all 3 lines of the flex. While chaning the LCD this sticker crushed in position of the screw. After putting in the new LCD my screen still stay black, I sent back the display, got a new one but still the same .. maybe cause of this sticker ? Or any other ideas ? Thanks !!
Have you found a solution for your problem? My sticker crushed in the same position, the screen works but my force touch doesn‘t work anymore (with old and new sensor)
Does anyone know what he was applying at 3:50? Also, what was the stuff is put on the new cable before soldering it on?
Flux for welding
Hi,
How do you place the new flex connector precisely on the watch so that every "gold dots" connect properly?
Thanks
Very carefully. 😂 the truth is that if you have the contacts tinned properly without too much or too little solder, once it gets hot enough to flow, surface tension will pull it into place as long as it’s close. Better towards too little solder than too much
Mistrz!! 👏👏👏👏
Kolego. Nie mistrz, a rzeźnik. Takie rzeczy się robi odpowiednim grotem i pod mikroskopem.
Wiem wiem, sam ostatnio wymieniałem taśmę w 3ójce i właśnie pod mikroskopem, dlatego podziwiam kolesia za wzrok i łatwość w jaki sposób on to zrobił hehe
Oglądam tych „rzeźników” Hindusów i mam czasem lekki uśmiech na pysku, patrząc jak oni to naprawiają 😁 Najlepiej jak robią projektory 😅 Dosłownie, jakby skuter pod domem se robił 💪 I najciekawsze to, że naprawiają i to działa 🫣😜 Ja jak robiłem iwatcha (jestem amatorem) to musiałem mieć zestaw chusteczek, żeby pot z czoła wycierać 😅 pozdo
Also, what was in the blue bottle at 5:08?
Can you please show how to fold the flex cable and attach the the metal plate to the power button, my cable was cut and the video doesn't show how you did it on the new cable.
It works for mic issue? Excellent video
💙
What is the liquid he is using when cleaning the terminals?
hi bro, do you have store? or online shop store? i don't know the problem of apple Series 3, i change already the following: LCD assembly & New Battery, but until now is not Working? do you have any Suggestion! Thank you so much.
hi, what is the metal you are soldering ??
thanks
RecBack solder
What was the soldering temperature? Thanks
400 degree
@@cambofixing celsius ?
What are you applying? In 03:50
Also, what is its efficacy?
Can you please do Apple Watch 4 LCD Flex? Thanks
yes we can
can you please tell me what materials you used?
Which flex connector is from the screen?
Bro help, i successfuly repair the flex but now when I turn on i have apple logo boot loop??? Fix?
What is your soldering iron temperature
i think 320 Something?
N P he said 400
Were we get this ribbon
It’s essentially a, ‘Don’t try this at home’ video! Guys, go to your local repair shop and let the experts handle it. 😆
Hello man, can you repaire my watch the flex is cut, where are you located, it is watch 3 how much doest it cost
Hi, where are u located? If india reply plz .. Thanks.
Can be this repair a Solution for no image on LCD ?
Sir can you help me my Apple Watch series 4 lcd connecter flex print plucked on board
How did you know it was lined up correctly when soldering the new one on?
He set the sides in place first. There is also a hole in the flex cable that I’m certain is key. As long as you have the contacts properly tinned and it’s lined up close enough, the heat will cause the solder to flow and actually pull it into place. If you can get the first three or four attach this way, than they should all end up lining up.
You’d be surprised how long I did this creating more work for myself trying to get things perfect and hold them in place before realizing that the surface tension of the solder will actually do the work for you. Holding it still ends up actually being counter productive a lot of times. This is especially true with hot air
Hey
My watch is not pairing after replacing the display in Apple watch series 3
Plz help
Hello, what are all the materials used in this video?
Eu não estou conseguindo abrir o encaixe do conector alguma dica??
hey, can you please send me the link for the flex connectors? thanks!
Go to google and search Apple Watch? series flex cable
Lcd kaha pe mila
U tell glass repacent
Id song?
Meri apple watch mein iCloud fas gaya hai please remove iCloud series 3
l 2
Man o' man, I think it's better to send it into Apple for repair. Too much can go wrong.
Apple does not repair, apple replace