12 Best Mechanic Tips and Tricks from the CAR WIZARD put all together
HTML-код
- Опубликовано: 28 авг 2024
- The CAR WIZARD 🧙♂️ shares his best tips and tricks for making it easier to work on cars. To give the Wizards a couple of days off over the holidays they put together a mix of their best shortcuts to working on cars.
🎸🎸 Hope you like the new intro and outro music and updated Wizard logo. Check out Clayton Cagle / claytoncalifornia 🎸🎸
🔮🔧 AMAZON AFFILIATE STORE: www.amazon.com... 🔧🔮
🇬🇧🇬🇧 UK AMAZON STORE: www.amazon.co.... 🇬🇧🇬🇧
🧰 BENDPAK LIFTS: www.bendpak.com 🧰
👕 CAR WIZARD MERCH: teespring.com/... 👕
📷 INSTAGRAM @realcarwizard 📷
🎸 MUSIC BY CLAYTON CAGLE: / claytoncalifornia 🎸
Thanks again CJ Cagle for the awesome intro / video music. Dont forget to check out his Instagram by clicking the link in the description!! Watch video until the end, lots of cool pics of CJ!!
well done intro.
Not my favourite style, as I don't like that kind of metal. But well made.
It rocks ! Hard ! Well done. I love it !
!!The impact-wrench-mimicking drums at the end!! So cool & well done.
Great new intro!
This is awesome Car wizard. Now Tyler Hoover should get a custom intro now to not be out done. Rick Astley is probably more the style music Tyler would get. Imagine getting Rick rolled every time a person watches Hoovies garage.
All great helpful tips, I know most of them. I've been a mechanic for over 50 years. I always keep a couple jars relays & fuses I've saved from junk cars. I use them for testing. I take the case off so I can push the relay on and off for testing. When I was younger I knew everything, then when I was about 40 I shut my mouth and opened my ears and became a better mechanic. I learn alot from the Wizard!
Tip #1 is great. Used that trick many times. You can also remove the cross member and tilt the transmission down to reach bolts that are inaccessible.
90s rangers with manual transmissions had 2 bolts that were Damn near at the firewall at the top. Have to tilt it down. great tip !
The load test is my favorite
"But I'm getting 12 volts!"
Not when you put a load on it. Now its 7 volts
I had a battery do that to me last winter. I'd get 12 volts, but as soon as I did anything with the truck it was in, it would go dead. First I disconnected it from the truck, then I made a device similar to what he showed in the video, and the battery wouldn't even run a single turn signal bulb. In fact, when I took the battery to replace it, and they insisted on testing it, the battery wouldn't even run their tester.
When it comes to anything auto repair, wizard is king no question. Not only does he have the knowledge but the dudes so enjoyable to watch
It shows that using the right tool for the job and quality materials is both a time and money saver.
This compilation of "Secrets of the Car Wizard " should be a more regular thing.
Many years ago my parents had a Ford Aerostar minivan. Dad busted his knuckles changing the last spark plug on the passenger side. Took him hours. A few months down the road he was doing a brake job and noticed with the tire off the spark plug was right in front of him.
My parents owned one as well, that took one year, that was back in '99 and one year later, they replaced it with a Windstar, which is cooler, but the Windstar should be one the don't buy list because they have a 3.0 liter V6 as well as the parts being hard to find.
🤣🤣🤣
Guessing he didn't just pull the doghouse. You get a lot more access that way. When I was 16 and first got my license I drove an 86 Aerostar with a 3.0 and a stick shift. We lived an hour drive in every direction from the nearest town big enough to have a stoplight. Either my dad had a lot of confidence in me or I wasn't his favorite and that was his way of showing me.
@@nickwarner8158 You were very lucky to get an Aerostar with a stick! I knew they existed but never saw one in person though (but wish I had). I'd sure love to have one. When I was in high school, a neighbor that was the same age inherited his grandparents Aerostar XLT. It was 2-tone with brown upper and lower and gold in the center of the body. I think it also had the 3.0 also but was an automatic.
He ended up lowering it and it looked badass. I've always loved the looks of them and the Astros and the Astros, too could be purchased with a manual transmission, at least in the earlier years. I wish I could buy a minivan with a manual transmission today. The Transit-Connect comes in a manual in other markets but unfortunately not in the US. I think the last minivan that was sold here with an available manual was the Mazda5 which was also a cool minivan until the last update where they made it crazy-ugly. Unfortunately, the looks of the last one I think really hurt its sales and Mazda ended up discontinuing it which was a shame.
There is someone here on RUclips who did a 5.0 swap on a really, really nice blue Aerostar and he went with a manual transmission on that one, too. It's worth checking out if you haven't seen the video of it yet. It was pretty awesome!
@@brianthe82studioandlegomov97 hard disagree. My windstar is fucking tank. It won’t die. Hard to work on for a DIYer, but mines a tank.
We have used Vaseline on o-rings for years. Painting equipment, watering equipment, and cars and trucks. Old farm trick
Good tips. 45+ years in the business, I have a few 18", 24" and even 30" long 3/8 extensions and with them and some good quality swivel sockets, the reach is endless!👍
Thank you for the Always worthwhile interesting content! 👍🇺🇸
As they say, work smarter, not harder
Car Wizard!
Wizard: Thanks a million for producing one of the very best sites on the Net. Sharing your years of experience has doubtless spared thousands of car buyers immense grief. I myself would never buy a car without checking your YT channel. Congrats on a job well done!
It's like magic, the Wizard's hair keeps appearing and disappearing! 🤣🤣🤣
New intro approved the music is really cool too :) CJ is amazing
Learning how properly remove a rivet was very valuable. Thanks.
I like the new Intro! Love it Clayton Cagle!
Tip #2 YES! This saved me last summer when I was 40 miles away from home. Couldn't start the car, after a few tries I noticed the fuel pump was not making noise. Had my son reach under the car and hit the fuel tank with a flashlight. Three hits and the car started! Got home with no problem. Not sure why my original fuel pump only lasted 430,000 miles! ;-)
This is the best video you've uploaded all year!
Cool intro. Great tips. Thank you
Haha the first tip the Wizard has hair! That’s a tip I need at my age lol
The rivets tip.. one of those things I should know but didn’t.
Hey wizard
Instead of using paper inside a socket to make a bolt fit tighter, you have to find when it falls or possibly lose and is potentially a fire hazard, I prefer electrical tape.
Stick it to the socket and it stays connected to you pull it off!
Keep up the great content
gob of grease always does the job
I like masking tape myself.
Fingers off latex gloves as well 👍
Blue painters tape.
I've had the tape backfire on me. Held the bolt while I got it started, but then was too sticky couldn't get my socket off. Ended up struggling with that. Stuck too good.
Always appreciate learning how to get clean holes from the Wizards!
Tip #4 I've used grease in the end of the socket to hold the bolt in place.
Omg that outro! 🤘🤘🤘🤘🤘
Removing rivets, what an elegant solution.
I love the new intro!
Love the new Intro. Car Wizard to employee: "You broke WHAT? C'mere..." Run, dude... LOL. Thanks for the great tips Wizard!
It's amazing how your hair came back temporarily. This is stuff I wish I knew in 1970.
Having worked in the used car business for 25 plus years, I know a lot of these tips and they are very helpful.
That rivet punch trick - gold. Thanks Wizard.
Digging the new intro mr wiz
Wizzard tip #9, always use the lubricant expected in that system, if its AC, use the AC lubricant expected in that system, if its Automatic transmission fluid, use automatic transmission fluid. The point here is USE THE LUBRICANT THAT SYSTEM USES!.
Love the new intro!
Hey Wizard & Mrs Wizard, the new intro is great!!! Happy New Year!!! 👍👍😁
Loving the new intro
Great new opening! I really like it. You folks are awesome. I always enjoy your videos!
That power probe is the greatest value of any electrical tool I ever bought! Insane utility. YES, most of it's functions can be done with cheaper tools /jumper wires but it's SO much more convenient with the PP that it's worth every penny!
Your original intro is still the best one.
Youre the man. Thank you
Nice! Tips and Tricks = Options when in a bind! Also, when connecting long extensions together, it helps to hold them near the tip (that's what she said)!
Back in the day when I used to work in the garage, we used to use petroleum jelly around the o rings to lube them up to seat. Those are some great tips
You can also put some grease in the socket to hold the bolt in place. That way you do not have to worry about retrieving a piece of paper.
We did that in the Air Force working on Jet engines with bolts in tight places.
You really do give some of the best real car information in all of youtube, well done brother and thank you for what you do.
I used to use BluTac instead of a piece of paper to hold a nut or bolt that was in danger of falling out of a socket wrench.
This is a great look back. I've used a lot of these already, and have had to tell people about "The Car Wizard" who I learned these tricks from.
A piece of paper keeping bolts from falling out is PRICELESS!
I've used your starter solenoid trick, back in the 70's, when I had a Ford that had the starter solenoid mounted, not on the starter, but on the inside fender. It would occasionally stick, and a few taps with a small wrench would free it up. For some strange reason, i'd have to replace those solenoids every three years.
Used to work in a Vineyard and there was a couple tractors that had dodgy starter solenoid's, used a long screw driver to start them by shorting out the terminal's on the Solenoid. :D
Ah, a Ford owner! Here in Colorado this was common in the winter. The solenoid was on the fender and the starter had a "Bendix" type of clutch that threw the gear into the flywheel. This set-up loved to get sticky on the coldest days!! Back in the "good 'ole days", every brand had its' own tricks and tips to keep them running in any conditions.
Homemade tools are my favorite. I did buy a 48" 1/2" drive extension with a pinned 3/8" end when the 4R100s were dropping like flies. New music too! What a 'riveting' video! (sorry, I have no self control)
Great tips. I had to purchase a long 3/8" extension to get to the passenger side O2 sensor on an Audi 2.7T. Once I cleared all the obstructions I had it out in a matter of minutes.
Clayton Cagle is taking the channel to the next level
I’ve used the “Dremel slot” trick on a deadbolt that had “one way” screws that could only be tightened, not loosened. Worked like a charm!
The new open is great!
Thank you to Car Wizard and Mrs Wizard, continued success to you and your family; you are hard working honest people who deserve good things!
@Car Wizard
At the beginning of this video, I was cocky and thought I knew everything you were going to say, but then you proved me wrong lol
Thank you, I like learning new things and I appreciate you:)
This is the Best Video of 2022 so Far, Thank You!
Those thin ratchets are amazing Car Wizard.
Whaaaaat new intro?!? That totally caught me off guard, it looks and sounds awesome wizard, great way to start the new year!
the Rivet tip was my personal favorite. ran into a regulator issue on my old bimmer and wish i knew this sooner
The Wichita Kansas area is loaded full of expert rivet mashers and rivet drillers!!!!
The paper trick (nr. 4) saved me a lot of troubles many time (seen it in the original video), thanks man!
Happy New Year, Dave. Really enjoyed your content in 2021, looking forward to more in 2022.
Wait, his name is Dave and not Car Wizard?!,!
I like the new intro.
Lord Wizard,
Hail sir, from Illinois. I greatly appreciate the effort you put into your videos. I'm a new car mechanic (hobby status), and your videos greatly help. Keep on keeping on my brother. ⚔️🛡️
I used trick nbr 4 , with the paper in the socket, today. Thanks ,it sure saved me a lot of time and frustration. Thank you.
I'll miss the old intro, but I love the new one!
Thanks Wizard. Love the vids. You and Hoovie are the Best. Wish I lived closer so I could get my cars worked on by the Wizard!
Super helpful tips! Great information for us do-it-yourselfers. Thanks for sharing these!
The RIGHT TOOL for the job at hand ;) Cool tips there Wizard especially No12 ;)
Those bad ground are notorious when you work on old cars. I make a point of it to always clean them if i work near or around them. One very often neglected ground connection is the one between block and body. It's often a woven strap somewhere deep inside the engine bay and it's exposed to rain and road grime for years. They corrode over time and can cause weird problems.
Then when you remove such a strap it sometimes pulverises in your hands. It's completely corroded...
One new strap later and some proper contact cleaning and all of a sudden the starter turns much better/faster! I wonder why...? LOL
I was binge watching Wizard tips videos yesterday and you missed my favorite - using an Amp Hound to figure out parasitic draw.
Awesome!, Specially the tip of the fuel pump! Nice! Thanks!
Thank you Wizard. I learned quite a bit from this video. ✌🏻
I like the new intro, and noticed it right away. A nice upgrade for the new year!
Nice New Intro, i Like it
Once again I agree 100% on the o rings and always check from the source. The band sounds good
FANTASTIC pointers and tips!!!
Thanks for the great content and pro tips. I only wish we had a shop like yours here in PA. Keep up the great work Mr and Mrs Wizard.
That fuel pump trick saved me many times in the past. You can either strike it below or by pushing up and down on the trunk.
Awesome tips and killer beats! That rivet tip 🤯 🤘🤘
Yes! Thanks for putting this together. In a world where most mechanics are really just part changers, this is the info we need!
Not just a bad ass guitarist but he also has a Zelda sticker on his guitar!!! winning.
You get a huge amount of windup breaking stuff loose with long extensions. When they let loose, everything flies apart.
Great video from the wizard.
Thanks for the rivet tips, got to replace the drivers door window mechanism in my 2003 mercedes S class!
The new intro sounds fantastic
Not that you don't have to know what you're doing but having the right tool makes all the difference.
Love the new intro 👊🏻
Have you ever tested the air quality of your shop? That reclaimed oil heating system looks like it creating havoc on the wall insulation
I loved the switched relay gizmo...the. guy who thought of that should have been given a raise.
It always seemed that cars that just had a major auto body repair had ground problems. Hmmm....
Hot rods with pretty powder coated frames? Ditto.....
Loved the o-ring tutorial! Never would have thought to use a/c rings in other applications.
HNY to you and the Missus. Thanks as always!
Wow! Wizard with hair on the right side too!
Thanks for the tips, Wizard. These were all very helpful. With how simple many of these were, I can't hardly believe I had never thought of them but I hadn't. Thanks for sharing them with us.
Excellent information, especially the rivet info!
For o-rings that go around a fitting (instead of fitting inside a machined groove), once I have the o-ring on, I gently slide the point of a Lisle #31800 scribe and go around behind the o-ring a few times. An old-timer told me to do that so that any rolling or twisting of the o-ring that happened when I put it on is straightened out.
I'm an espresso machines technician and I test so many machines as well. We do share a lot of similarities on how to troubleshoot and repair the machines. I loved that rivet removal tip no wonder the first one I tried to remove was rough, I end up using a screw and a bot on that hole. Thank you for the tips
This is the absolute best video on your channel. Glad to see it again. Great tips people at home would not know
Thanks Wizard. I may not use many of these tips but can always learn more about the problem solving mindset and approach to things in general.
Great tips. Thank you Wizard.
Thanks for telling me about the relay test switches, they helped me diagnose a REALLY weird no start condition on a BMW X5. Found a burnt out fuel pump relay, replaced it and then it started and ran for 1 second and set 50 trouble codes. However, with the relay test switch in, the car ran normally and didn’t set any codes. Turns out the ECU was shorted out internally.
This channel is so interesting and very relaxing to watch.
Thank you for doing this mr and Mrs wizard.
My wife got me some Wizard - Omega Auto merch for Xmas. Sweet!
Thanks for all that info. I really like the relay tester
The load test ground fault indicator is a great idea! I'm not much in to car troubleshooting yet, but I have been working with hydraulic generators for almost nine years and I think that helps me understand a bit more of the electrical side of things.
These tools are GENIUS!!
I have to get my hands on them, very useful little gadgets!
Oooooooh new intro.
10/10