Thank you for this show. It's really a big help. I use it too. I have so many problems with it that it doesn't work with the color phaser, only the LED lamp, which has a traditional color dial, doesn't do anything.
Thanks a lot for your feedback. Think it depends on the fixture type - could you try to merge the color wheel information manually to the presets? Then it should work.
Hello can you make a macro to implement this new show file in our show that and older this allows us to be able to work correctly with the new output that you have integrated ?
So the phasers all worked perfect until I pressed in Group select (-) symbol. And now that line dont work anyhmore. How can I reset that? And what actually "group select" section do?
I actually found the solution. You have to go to the group pool and save your fixtures into the additional "start show group 1-6" groups. The Group select switches between the "Start show group X grid" and "Start show group X" groups, although the switching back to the first group doesn´t seem to work so you get stuck in an empty group when you don´t have anything saved in the second one
Yes there are some updates with v2.0 already, for example the structure of macros and extended LOS area. But we are also working on some new things for the next versions.
Ja, beim Defqon 1 sind auch grandMA3 Systeme im Einsatz. Unsere Lichtsteuerungen sind zuerst mal für den professionellen Gebrauch im Entertainment Bereich gedacht. Natürlich gibt es aber auch kleinere Geräte, die insbesondere beim Vorbereiten und Visualisieren von Shows von zu Hause aus helfen. Schau mal hier: www.malighting.com/product/grandma3-viz-key-4023576/
Hi almanzarj4823, thanks a lot for your request. Hope we understand your question right, but you can assign every macro or sequence to the xkeys - they could do the job of a toggle to your phasers. Hope that helps😊.
In general this is possible. The layout is based on sequences. You have to export and import them first in your show and afterwards you can export and import the layouts. Please be careful - importing the objects with dependencies might overwrite some of your existing data for presets etc....so please test it and see how it works for you. If you have questions your local support will be happy to help.
Could you send your file to your local support? For the Mac Auras we can see no problem here, the Pointe might need a merge in the color presets with the color wheel information. Hope that helps.
The easiest way is of course to start with this MA Startshow and build up your show based on this. But you can also have a look at the Import/Export menu to export layouts and sequences and import them in your showfile.
@@MALightingInt I found it, just assign the group to a fader haha I still have another question: can I add several other groups? 7..8.. If so how to do it... copy paste an old group? I think a little video on this point could help a lot of people! THANKS :)
![grandMA3 | MA Tips [EN] | Active only in the encoder bar](http://i.ytimg.com/vi/cpv5QWncUBU/mqdefault.jpg)
![grandMA3 | MA Tips [EN] | Active only in the encoder bar](/img/tr.png)
![[DRAGON BALL LEGENDS REVEALS ＆ STUFF] LEGENDS FESTIVAL 2024 Special Edition Part 1](http://i.ytimg.com/vi/mV5bGIswTtQ/mqdefault.jpg)
Thank you for this show. It's really a big help. I use it too. I have so many problems with it that it doesn't work with the color phaser, only the LED lamp, which has a traditional color dial, doesn't do anything.
Thanks a lot for your feedback. Think it depends on the fixture type - could you try to merge the color wheel information manually to the presets? Then it should work.
Hello can you make a macro to implement this new show file in our show that and older this allows us to be able to work correctly with the new output that you have integrated ?
So the phasers all worked perfect until I pressed in Group select (-) symbol. And now that line dont work anyhmore. How can I reset that? And what actually "group select" section do?
same problem
I actually found the solution. You have to go to the group pool and save your fixtures into the additional "start show group 1-6" groups. The Group select switches between the "Start show group X grid" and "Start show group X" groups, although the switching back to the first group doesn´t seem to work so you get stuck in an empty group when you don´t have anything saved in the second one
@@matthewkeir3443 This Fixed the problem. Thanks!
You're welcome. I still don't understand the purpose of the 2 groups though... if anyone knows, please enlighten me!
how can you create a bounce effect ma3?
Are there any plans to release an updated Startshow file now that 2.0 is released?
Yes there are some updates with v2.0 already, for example the structure of macros and extended LOS area. But we are also working on some new things for the next versions.
Thanks bro❤
Thank you 🙏🏾💡⚡
Oh ihr kommt aus Deutschland ? Setzt ihr auch bei defqon1 1 eure Technik ein? Gibt es da auch was für den Homebereich ?
Ja, beim Defqon 1 sind auch grandMA3 Systeme im Einsatz. Unsere Lichtsteuerungen sind zuerst mal für den professionellen Gebrauch im Entertainment Bereich gedacht. Natürlich gibt es aber auch kleinere Geräte, die insbesondere beim Vorbereiten und Visualisieren von Shows von zu Hause aus helfen. Schau mal hier: www.malighting.com/product/grandma3-viz-key-4023576/
Can I assign an effect toggle to my xkeys?
Hi almanzarj4823, thanks a lot for your request. Hope we understand your question right, but you can assign every macro or sequence to the xkeys - they could do the job of a toggle to your phasers. Hope that helps😊.
How to use los
Is there a way to get the Phaser layouts added to an already built show or can you only have them when loading the "startshow"?
In general this is possible. The layout is based on sequences. You have to export and import them first in your show and afterwards you can export and import the layouts. Please be careful - importing the objects with dependencies might overwrite some of your existing data for presets etc....so please test it and see how it works for you. If you have questions your local support will be happy to help.
Top, but I have been using this function for 1 month, it is impossible to make the colour phraser work,
I use Martin Mac aura and robe pointe.
Could you send your file to your local support? For the Mac Auras we can see no problem here, the Pointe might need a merge in the color presets with the color wheel information. Hope that helps.
Is there any way to add a speed master? Everytime i tried it get kicked out when a new phaser gets selected
Hey! Hm that sounds strange - could you get in contact with your local MA distributor? Then we can have a look at this issue directly.
@@MALightingInt i was the one messing up.. figured out my mistake thanks for the response
How to import the startshow in a existing show?
The easiest way is of course to start with this MA Startshow and build up your show based on this. But you can also have a look at the Import/Export menu to export layouts and sequences and import them in your showfile.
How control this with fader in context ?
Thanks a lot for your question. Can you explain a bit more what you want to control with a fader in this case? Thanks for your feedback.
@@MALightingInt I found it, just assign the group to a fader haha
I still have another question: can I add several other groups? 7..8..
If so how to do it... copy paste an old group? I think a little video on this point could help a lot of people! THANKS :)