E10 - Phaser Effects For Beginners - GrandMA3 OnPC Tutorial
HTML-код
- Опубликовано: 23 июл 2024
- Learning the GrandMA3 Phaser Effects can look a little difficult, but it can be done in a simple way.
In this GrandMA3 Phaser tutorial we are going to look at the predefined phaser effect that are built in to the GrandMA3 Console.
The Predefined Phaser effects are a nice little template that are going to get you started working with Phaser effects on GrandMA3, and it will show you how easy it is to work with.
We are going to build the GrandMA3 Phaser Effects, and store them in a few sequences, and after that we are going to assign them to some GrandMA3 Special Masters so we can manipulate the speed of the Phaser Movement dimmer and color effects.
This is another GrandMA 3 Beginner tutorial from Event Lighting, and as the name applies - Its for GrandMA3 Beginners. 😀
In this GrandMA3 Tutorial series you can learn GrandMA 3 Programming, if you follow the episodes from episode 1 and forwards - Follow along in the playlist below:
----------------------------------------------
DISCORD Community:
/ discord
EMAIL LIST:
mailchi.mp/afffb3b9c40f/event...
RUclips SUBSCRIBE:
/ @event-lighting
-----------------------------------------------
🎦 🎦 Play list for all our GrandMA 3 Tutorials: 🎦 🎦
• GrandMA 3 Tutorials
Please leave a comment if you have any questions for this tutorial, and let me know if you need me to explain anything better :-)
Episodes you dont want to miss:
⌾ Sequences and Cues - • E08 - Sequence and Cue...
⌾ 3D Render - • E07 - 3D Render Qualit...
⌾ Setup 3D - • E04 - Setup Grand MA3 ...
⌾ Swipeys and Presets • E05 - Swipeys and Pres...
⌾ Layouts - • E06 - Layout View Gran...
-----------------------------------------------
Facebook Page:
/ eventlightingchannel
-----------------------------------------------
Event Lightings AFFILIATE links to GrandMA3 equipment:
DISCLAIMER: We have affiliate status on all the links below.
That means that you pay the same is you would otherwise, but we might receive a small commission on the sale.
-----------------------------------------------
We have our own landing page, where you can see all the GrandMA3 3 products we offer thru our affiliate program in this link: thmn.to/thocf/yq2qqs3y08
-----------------------------------------------
Direct links to GrandMA3 products:
⌾ GrandMA 3 Light:
thmn.to/thoprod/469607?partne...
⌾ GrandMA3 Compact
thmn.to/thoprod/536401?partne...
⌾ GrandMA3 Compact XT
thmn.to/thoprod/478578?partne...
⌾ GrandMA3 Light CRV
thmn.to/thoprod/474742?partne...
⌾ GrandMA3 onPC Command Wing XT
thmn.to/thoprod/492147?partne...
⌾ GrandMA 3 OnPC Command Wing:
thmn.to/thoprod/469451?partne...
⌾ Grandma3 onPC Fader Wing
thmn.to/thoprod/506250?partne...
⌾ GrandMA3 onPC 2Port Node 2k PoE
thmn.to/thoprod/533062?partne...
⌾ GrandMA3 onPC 2Port Node 2K
thmn.to/thoprod/469458?partne...
⌾ GrandMA3 4Port Node
thmn.to/thoprod/480798?partne...
⌾ GrandMA3 onPC 4Port Node 4K
thmn.to/thoprod/469487?partne...
⌾ GrandMA3 2Port Node
thmn.to/thoprod/480796?partne...
⌾ GrandMA3 8Port Node
thmn.to/thoprod/480800?partne...
⌾ GrandMA3 onPC 8Port Node 4K
thmn.to/thoprod/469492?partne...
#Grandma3phaser #grandma3effects #grandma3 #grandma3onpc #grandma3tutorial #grandma3programming
#GrandMA3beginner 
Хобби
*Sign up for my email list to help me make my new learning platform:*
mailchi.mp/afffb3b9c40f/eventlighting
Thank you very much! You saved me, because yesterday I got the information that we will work with GrandMA3 OnPC and I don't have a plan of working with Phaser-effects!
Really great tutorial! Thank you!
Hi Ryan. Thank you, glad you enjoyed it 🙏
Thank you very much sir this video is very helpful and informative I was trying to learn how to make this kind of effects… now I like more my MA3 I wish you lived closer to Vegas 👍
Thank you!
Hi, im loving all these tutorials but theres one thing that i need that didnt seem to get covered. That is, how do i bmp delay fixtures so then they go in a with each other as in like one MATricks group moves, then the next group moves, then the next group moves with the delay between them being the bpm of a song - and it loops. Hope that made sense any help would be amazing :)
When I go to clear like you are doing after I have selected Dim Sinus to then clear and select Snap On, It does not clear like yours is doing. Is there something new that I am not doing with the most updated software? Just picked up the command wing so I have been learning along with your series. Thanks for the knowledge!
HI can you explain how to make the phases start repeating only after the completion of the entire cycle of phases
Is there a way of adding more effects to the macro
Hello everyone,
I would like to have only one running light. I somehow have no idea how to do that. If I do 0 thru 360 or 720, I still can't get a lamp running through it as a running light.
Best regards
Frank
Hola donde puedo conseguir esos macros ?
when i run the macro for predefined phaser all the phasers are greyed out. i see that they populated but none of them work
Hey, have you made a video of how to create the Snap on and other effects? I tried adding this Macro to look at what is happening in the background but as a beginner its hard to figure out. I can easily make Sinus Dims and dims with snap on and off. but how do you mix them together ? Thanks for any help =)
Change the transition % under the transition tab under dimmer
@@calebcoble7468 thanks!
Thanks
Thank you for watching 🙏
Good👍
Thank you Vishvanath 😀
hello again. I would like to know how the MAgic key works and thanks for the work you do.
Hi Sal. I promise that we will go thru that at some point - but I don’t know exactly when we will get there 😀 No problem 👍👍
Hey, awesome tutorial, but how do I clear my "all 1" preset after I've used it?
you can always delete the window by clicking on its header and selecting "delete window" in the upper right side of the pop up window.
❤️❤️❤️
🙏🙏😀😀
hello and thanks for your tutorials. Just a question, I don't know why I can run an effect but can't change the phase ??? it doesn't work at all...
thank your for your answer
If its a Position effect you want to change, make sure you are in the "position" attribute, right click on the wheels and change it. Same in dimmer, color etc.
@@Event-Lighting Ok !! now I got it. That's what I did but the reason why it didn't work is over there. It's because I created my effect with the "grouping" fixture type and not by selecting all my fixtures. I think it's not logical but now it works. I had to overwrite all my fixture groups that I made from the FixtureType "grouping" and now it works. (sorry for my English, I'm French).
No problem is long as it works. Sometimes you have to adapt to a new workflow coming from other console platforms 😀 vive la france 🇫🇷 😀
Can you not assign speed masters to phasers/recipes directly? Only in a sequence?
No i don´t think so - i am sure it will be possible in a future update.
hELLO ALL wondering why my version of MA3 on pc is slightly diferent. I get this video is a year old.... Is there a chance that the software has been augmented a bit?
Yes. Different versions.
If phaser is staying i switch to hog, or i end my carrer
How can I get this on the ma2
Phaser is a feature only available to ma3
Sorry for the question, how much is the price of this device?
Too much. Buy grandMA2 lite or onpc
CCT