Garmin Livescope Wiring and Installation Guide
HTML-код
- Опубликовано: 27 авг 2024
- Welcome, I'll be going over a few graphs I use on the boat. Also some wiring tips and tricks, batteries, fuses, poles, mounts, and then some LVS32 LVS34 action. Thanks for watching.
Great Setup. NO Sea Clear harness ever necessary and the Li Time's work just fine!.. So many argue about that. Strong work!
Thanks Stephan, those batteries have been doing pretty good. Probably doing 3 100AH minis when my trolling motor batteries start to go. I really like all the DIY content you are putting out.
@@CarlosPadillaCentex I see your videos through a different lens. I know the work you're putting into them. Fantastic!
Thank you for sharing pal awesome job keep up the great work.💪🏾💯
Happy to share, Thank you
Another good vid Carlos. The diy videos are always appreciated. As far as not getting to fish enough you just need a bud to encourage you and keep you in trouble with proper priorities 😂.
Right on, my fishing buddies are getting pretty busy these days. Fishing is on my top 3 priorities
Hey, Carlos!! That video was loaded with information and you got some serious skills!! Really impressive! 🎯🎯 The DIY stuff is cool!!
Thanks brother, when I’m not on the water I’m always fiddling around with stuff. Had a lot of comments asking about graphs, network, and battery. Hope I answered most of them. Tight Lines!
Great setup and well done wiring and positioning of the graphs and transducers. I run two livescopes also, an LVS-32 from the console on a GPSMAP 1243xsv and an LVS34 from the bow on a GPSMAP 1242xsv. I also run a SEELITE 2.0 Pole from the Console and a Summit Fishing Pole at the bow. Thanks for sharing. I am one of your subscribers and for quality of content you are putting out you should have about a 100,000 subscribers. 😃
Sounds like an awesome setup. Never used a GPSMAP, but heard they are great graphs. Thanks for subscribing and the kind words
Another awesome video Carlos. I am smack dab in the middle of doing all kinds of wiring on my boat. Started with the control panel switches not working and then removing 2 network boxes and cables. Right now it's a big mess and hope to get it sorted out soon. Gonna sort out the fish finders first before I try to figure out the control panel.
Wiring is a big challenge, hope you get it sorted out. At least you know how to do it. Thanks
Great video!
Time to catch some fish! Thank you
Nice work, appreciate all your videos
Thanks for the continued support
Great video, thank you!
Thanks DJ, just sharing what I’ve learned
Awesome information buddy 👍
Hi Roger! Thanks
11:25 thats a cleanass wire job there buddy…..only thing I would change to make it cleaner is to put marine terminals connectors on the wires going to the power block…..but thats just me🤷♂️🤷♂️🤷♂️
Appreciate that! That’s a good idea, something for the lugs to crush down on.
I learned a lot from this video where did you get the amplify distribution blocks and the 30 cut off switch
I just used amazon and searched “waterproof switch” and “amplifier power distribution” . Glad the video helps
thank you@@CarlosPadillaCentex
Hello. the live probe in the tests has only one wire. which model is it, lvs32 original/classic or lvs32-IF ice fishing?
It’s the single wire original. Not ice fishing.
Hey Carlos. How useful do you find the livescope mount compared to if you had it on your trolling motor?
I feel the pole gives you 100% control of fine adjustments needed for perfect bait placement, tracking, and fishing while spot locked. On the trolling motor is more useful for locating and chasing fish. Then casting toward the fish, but not tracking your bait perfectly. Trolling motor would work great on very light wind conditions. 5mph or less or in a cove.
How did you come up with 1amp for gls10? Garmin says can draw up to 5amps?
www.bbcboards.net/showthread.php?t=1211713
Most sources estimate .75 amps. Seems kind of low to me also. The fuse is 7.5 so no way it can draw 5a. People have metered it also, just going off that info.
How are you wiring six gauge down to your 14 gauge yellow fuse holder?
The 6g goes into the distribution block. I used 10g butt connectors and 10g wire crimped to the Garmin fuse end. Then 10g into the distribution block.
Is there any problem running 106 off its on regular trolling motor battery?
Kind of, I had the 106 and LVS32 connected to a lead acid house battery running pumps and lights. All it does is flicker a bit with anything running. The main thing is power draw, as long as you have a jump start device everything should be fine. Livescope will drain a battery very quickly.
Sonar nya apakah Terbaca ketika di pasang di dlm boat
Yes
I got the lifepo 12.8v battery and the gen pro 10x1 charger do you leave it plug up all the time until its time to go to the lake. thats what I did with my other battery
I think it’s better to charge it for a full day, then unplug it. Top it off before you head out next trip. There is a bms in it that has overcharge protection that can be tripped.
thank you that is what I will do@@CarlosPadillaCentex
Sonar nya apakah tahan terhadap air asin
Yes Salt or Fresh Water👍🏽