It is by far the most beatiful 1250 i have ever seen . I would be greatfull if you could give me more info on what your bandit wears. You have done EXCELLENT WORK .
The header is a Arrow (adjusted) system 4-2-1-2 the fork legs are GSXR 1000 K8 ... the triple clamp and bottom fork clamp of a GSXR 1000 K6 (adjusted) Gr
Absolutely great job done on that one. Indeed the most beautiful S-Bandit ever seen. I just sold my 600N Streetfighter and get the 1200S K6 next month. Your bike is gonna be my new reference ;)
The cleanest bandit i've ever seen!! Please find a way to fab some additional pipes for the dual exhaust application so some of us less skilled builders can get on the duals bus!! AWESOME BIKE man
I love this, thanks for sharing. 🙏👍 Im in Canada with some limitations like no power commander 5 but do you have a parts list, and videos of this full build. It's a dam beautiful bike 🥳
Lovely work. Could you please specify the front fork solution in details and also how you solved the ABS sensor fasten nut. I have been looking and looking for a USD fork solution for my bandit 1250 K9/K10 ABS project for this winter. Also I love the clutch cover. Great work
Oh my goodness I love love love love love the duel exhaust is that off of GSXR 1000? And where did you get that awesome seat cowel. I have a 2011 1250 fa. Really awesome looking bike thanks for sharing.
one of the most beautiful bandit i see.. Ripple.. i have question for you ..i have a bandit 1200 carburetor .. if i mount 4 conic filters+open exhaust+ dynojet stage 3 and calibration how many hp and torque earn my engine ?? thank..and congratulation..
I was trying to put a Haybusa throttle body on my 09 Bandit 1250s but think it will be pushing to much fuel is so I went with an 04 GSXR throttle body instead, just needing some of YOUR wonderful parts we don't have here.
This awsome Bandit is the most beautifull I have ever seen ! Will you please tell me where you did get your K&N RC-1290 air filters ? I'd like to buy them for my 06' Bandit 1200SA, but I do not find them in red but only in grey...Thanks
wow hand adjustable rear suspension, upside down forkies, knn high flow intakes, twin exhausts, makes me standard bandit look like friskies, i love the see thru clutch cover how did make that?...
+Ripple49 is that bike better? its only a vtwin I suppose handling will feel a bit lighter than the fat 4 cyl bandit? im using a 2006 1200 bandit air and oil cooled 5 gear version..im struggling to keep it cool in our hot tropical climate in Singapore...any tips to help these air cooled bikes cooler to run?
Beautiful bike,Have notice you have a gear indicator located where the existing Suzuki emblem was located on the dash,I would like to know what brand or type it is,where you got it from and the lower fairings as well.Thankyou.
By far the cleanest bandit I have ever laid my eyes on.... I would own this bike in a second, every upgrade done is what i would have done to mine!!! i think its time to ditch the 2000 and upgrade to the 2007/08
Great look, love the K&Ns, can you just confirm the part numbers? I'm looking to do exactly the same thing on my 1250 street fighter. Is it straight forward enough? Any adjustments or tweeks required? Obviously it's possible on injection?? Sorry new to all this!
Which fork is that? Where did you get the custom triple clamp made? Did you use the donor bike lower clamp, or a custom? Great bike. I love the individual air filters.
Street bike triple clamp GSXR 1000 K5 K6 … Triple clamp bottom GSXR 1000 K5 K6 … Steering stem head original Bandit 1250 … Triple clamp bottom GSXR 1000 K5 K6 Drilled from 54mm to 56mm for GSXR 1000 K7 K8 Or B-King fork legs ... same legs ... ;-)
Why the 4X K&N RC-1290 filters on those fuel injectors?, just wondering as its something I never seen before and also a area I wouldn't like to mess with on a bike, Aint it factory calibrated to work just fine without installing the air fliters
Most beautiful bandit i have ever seen, congratulations.
Toll! Wie hast Du das mit den Auspuffkrümmern gemacht??
It is by far the most beatiful 1250 i have ever seen . I would be greatfull if you could give me more info on what your bandit wears. You have done EXCELLENT WORK .
Best looking bandit I have ever seen
Dude that's the slickest bandit I have ever seen period
Awesome job ! Congratulations ! Suzuki should sell a limited edition of the bandit inspired by your excellent job !
Old post but great work with the forks and front end! That is one of the real challenges with the bandit.
Elle est magnifique !.
Yes indeed
The most beautiful bandit I've ever seen.. just fantastic !!
Wow!!! What a beautiful Bandit and it has a full fairing. I've never seen that before. Still looks great!
This Bike is AMAZING!! I have owned a few bandits...this is my next one for sure!!! Great taste in the mods!!!
This is one damn beautiful bandit out there! Cheers!
I too own one of these but this is just beautiful,10/10 sir
The header is a Arrow (adjusted) system 4-2-1-2
the fork legs are GSXR 1000 K8 ... the triple clamp and bottom fork clamp of a GSXR 1000 K6 (adjusted)
Gr
The best Bandit I've ever seen
Très belle réalisation, parfait, vôtre Bandit est magnifique bravo j'adore
Show de bola parabens. Banditi. Susuki super nave.
This is the bandit more beautiful than ever se before like loo
Absolutely great job done on that one. Indeed the most beautiful S-Bandit ever seen. I just sold my 600N Streetfighter and get the 1200S K6 next month. Your bike is gonna be my new reference ;)
Woah elle est magnifique. Elle a été entièrement modifiée mais avec goût. Chapeau pour le travail !!! 😀👍
This thing is freaking sick best I ever seen 😍🙌🏼
WOW! Gorgeous bike!
The nicest bandit on planet earth.
Dual exhausts look amazing!
It is a brilliant bandit and an exelent works.
A monster of a bandit!!
Magnifique avec les 4k&n beautiful very
Bandit mais linda que já vi, parabens brother!!
What a beautiful motorcycle
4 in 2 exhaust in Bandit... Good idea!
Best regards,
Arek Bandit 1250 SA 2012
Gorgeous Bandit. I'd like to do my air filters the way yours are. Any instructions or parts list for what you did there? Looks great.
such lucky person to have such amazing bike your life is worth of living and here i cant even afford bikes above 300cc
What bike did you swap the front suspension from?
The cleanest bandit i've ever seen!! Please find a way to fab some additional pipes for the dual exhaust application so some of us less skilled builders can get on the duals bus!! AWESOME BIKE man
K&N part numbers: K&N RC-1290
That's how it should have been! very nice work!!
nicest bandit I've seen.
Congratulation,very great job,awesome Bandit
Glorious bike!
Very veeeery nice build. Kudos to you.
That's a sweet ride you have there. Nice work.
I love this, thanks for sharing. 🙏👍
Im in Canada with some limitations like no power commander 5 but do you have a parts list, and videos of this full build. It's a dam beautiful bike 🥳
Lovely work. Could you please specify the front fork solution in details and also how you solved the ABS sensor fasten nut. I have been looking and looking for a USD fork solution for my bandit 1250 K9/K10 ABS project for this winter. Also I love the clutch cover. Great work
looks a real bad ass! looks awesome !
Oh my goodness I love love love love love the duel exhaust is that off of GSXR 1000? And where did you get that awesome seat cowel. I have a 2011 1250 fa. Really awesome looking bike thanks for sharing.
good evening was wondering where did you get most of your parts and did you have to remap the computer after the filters change
Sehr schön gemacht 👍🏻
awesome bike, you did great job!
well done, I have some idea of how much work this took, never mind the cost!
Awesome looking "WOW". Can you forward details, of where to purchase the Suzuki (logo) footrest hangers please?
Sweet ride mate, well done.
Stunning bike
Great work! Tell me from where did You get "footsets" with Suzuki logo?
A lot of fruit on that bandit 💰👌
one of the most beautiful bandit i see.. Ripple.. i have question for you ..i have a bandit 1200 carburetor .. if i mount 4 conic filters+open exhaust+ dynojet stage 3 and calibration how many hp and torque earn my engine ?? thank..and congratulation..
Hi, would you be able to tell me your windshield/windscreen brand please? thanks
Best Bandit ever! Just ashame it's not a GSXR...
bonjour. belle vidéo mais surtout magnifque moto.aimerais savoir le diamètre des 4 filtre ainsi que celui des 2 petits racordés aux durites
I was trying to put a Haybusa throttle body on my 09 Bandit 1250s but think it will be pushing to much fuel is so I went with an 04 GSXR throttle body instead, just needing some of YOUR wonderful parts we don't have here.
That's an 04 GSXR 1000
Im most interested in your fork choice, clear engine cover, and under seat tail tidy. Where do can I look for these?
Beautiful job!
E os mini filtros de ar de respiro? Qual o código? Ou onde comprou?
very nice looking bike.. i just got one recently and saw you have the upside down forks.. what bike did you pull them off of?
Lovely !
This awsome Bandit is the most beautifull I have ever seen ! Will you please tell me where you did get your K&N RC-1290 air filters ? I'd like to buy them for my 06' Bandit 1200SA, but I do not find them in red but only in grey...Thanks
Aonde conseguiu essa tampa de embreagem??
wow hand adjustable rear suspension, upside down forkies, knn high flow intakes, twin exhausts, makes me standard bandit look like friskies, i love the see thru clutch cover how did make that?...
Clutch / Brake master cylinder are Kawasaki ZZR1400 2012 ;-)
Clutch cover: www.whaccessories.com/Suzuki-Bandit-650-1250-Accessories.htm
+Ripple49 thanks for the link, what bike are you riding now??
Suzuki V-Strom DL 1000 2015 ... ;-)
Even though a bit modified ... :-)
+Ripple49 is that bike better? its only a vtwin I suppose handling will feel a bit lighter than the fat 4 cyl bandit? im using a 2006 1200 bandit air and oil cooled 5 gear version..im struggling to keep it cool in our hot tropical climate in Singapore...any tips to help these air cooled bikes cooler to run?
Beautiful bike,Have notice you have a gear indicator located where the existing
Suzuki emblem was located on the dash,I would like to know what brand or type
it is,where you got it from and the lower fairings as well.Thankyou.
www.tne-systeme.de/index_en.html
the best bandit !!!
By far the cleanest bandit I have ever laid my eyes on.... I would own this bike in a second, every upgrade done is what i would have done to mine!!! i think its time to ditch the 2000 and upgrade to the 2007/08
Où avez vous eu la ligne double ??????
Please answer the questions!
Wauw, mooi gedaan!
Great look, love the K&Ns, can you just confirm the part numbers? I'm looking to do exactly the same thing on my 1250 street fighter. Is it straight forward enough? Any adjustments or tweeks required? Obviously it's possible on injection?? Sorry new to all this!
K & N RC-1290
K&N part numbers: K&N RC-1290
Very very nice... All that idlin only goin make the mayonaise on clutch window worse than it already is tho..
Hot looking bike! Can I get a link for where you bought the clear view cover? And the S emblems. Thanks!
Looks like new version of the gooses bike. From Mad max.
hi lovely bike, can i ask where did you get the crash bungs and did you modify yourself to fit?
where can I buy mirrors like those ?
awesome bike man
PCIII - 116Hp@7550rpm/124.8Nm@5773rpm
Beautiful. Can you list me the mods and where you buy them. Please.
What are the small filters for?
Thanks in advance
Small filters are for crank case ventilation
You have made a great job! Did you see any horsepower gain from removing the airbox and the K&N setup?
i think definite increase because the original airbox is same as 600 version, so expect more..
beautiful job mate, where did you get the tail section bodywork from?? I have a 99 Bandit 1200s I am restoring
where u got the k&n´s ? cant find them! and what handlebar is it, lsl fatbar, but which one? Greetz
Hello, you cut pipes to remove the plugs of the exhaust limiter?
wow love it well done ...
prachtige bandit! Heb deze video meerdere malen bekeken en wist niet dat je in Blgie woon. Had je een vermogenwinst bij al deze aanpassingen?
Why i can't see the fork extenders? Where are they?
Which fork is that? Where did you get the custom triple clamp made? Did you use the donor bike lower clamp, or a custom? Great bike. I love the individual air filters.
The fork legs are GSXR 1000 K8 ... the triple clamp and bottom fork clamp of a GSXR 1000 K6 (adjusted) Gr
Ripple49 So that lowered your front end a bit, right? I think those USD K8 GSXR 1000 forks are about 50-70mm shorter than B1250 forks.
Mike Noyes yes ... I created fork extenders of 50 mm
@@Ripple49 Hello Ripple49.
Beautiful customization! How did you extend the forks?
Cool! From which bike the front suspension, and where find tail and plastic cover?
Street bike triple clamp GSXR 1000 K5 K6 … Triple clamp bottom
GSXR 1000 K5 K6 … Steering stem head original Bandit 1250 … Triple clamp bottom GSXR 1000 K5 K6 Drilled from 54mm to 56mm for
GSXR 1000 K7 K8 Or B-King fork legs ... same legs ... ;-)
Front wheel from Bandit any changes?
find tail and plastic cover is self made from undertail Powerbronse and led taillight Suzuki GSX-R 600 K8/K9
No ... ;-)
For the cooling system you kept the stock one or you installed the GSX 1250 FA radiator? Because i see you faired it?
Where did you get the cover?? been looking for similar for a while now but not luck.
Bealtifull!! Wanderfull!! I want one!!
great job. bike looks amazing. what are the small KN filters?
Crankcase Breather and ISC valve hose
Ripple49
Hi , thanks, but do the small filters have any part number?
Breather Filter 13mm Motor Store
good afternoon,
What are the air filter sizes? Is it K&N? What model?
Totally awesome. So much work and is a piece of art. Did you do all yourself?
Yep ... all done it myself
+AHABNZ ... Yes ... all done by myself
Why the 4X K&N RC-1290 filters on those fuel injectors?, just wondering as its something I never seen before and also a area I wouldn't like to mess with on a bike, Aint it factory calibrated to work just fine without installing the air fliters
hi nice bike can you tell me where you got clutch housing please
Essas bengalas são originais dela
Where did you bought your windshield?
Machtige moto , knap !!