57 Chevy Truck! Removing the body from the frame!
HTML-код
- Опубликовано: 7 ноя 2022
- I rescued this 57 Chevy 3100 pickup truck from a field where it had been sitting for 57 years. We're going to pull the body off this chassis to get it ready for more modern equipment.
Авто/Мото
Nice find in the old 3100. Can't wait to see where this goes.
I'm working on a 3800 series 1 ton now. I'll follow along and watch your progress. Scott.
Thanks! I should be back at it soon!
Can't wait to see what you do with this one.
I'm pretty excited! Big things! and maybe a big block!
POR FAVOR A 1959 AZUL COM A GRADE N CASANBA BRAZIL A ORIJINAL AZUL QUE APARESE ROXA NA LUZ DA NOITE MEU PAI TINHA OBRIGADO
Ypu have a gantry built-in to your ahop. Span your lower chords of your rafters with anything (6x6 timber) that will bear the weight of cab (1000 lbs?). Chainfall on the 6x6, and a sling through the doors of cab and lift. Roll out chassis from underneath. Problem solved.
Jack each side block until you can get a 4x4 across to hold it high enough to roll the frame out from underneath.
I thought about that, but I didn't have the materials to jack it that high or span the width. Thanks for watching and the comment!
doncha just love when that happens the socket wrench what ever pops off and your underthere like an idiot thinking why isnt this bilt coming out
Yeah I spent a lot of time asking myself why…on a lot of things…thanks for watching and the comment!
I’m a student of your wife’s and I subscribed
Thanks for watching!
Lose those cutting disks they tend to come apart-in your face. Heat the bolts up first they will come out easier. Or a cutting torch if you have one. Js. Scott.
Those discs are pretty sketchy but my lack of patience makes me use them. I do have a torch but it’s not set up yet and I need to learn how to use it, so that’s a whole other challenge.
I got a diamond disk at menards for my 4 1/2 inch grinder and never bought another of those disks again.
@@scottphillips1210 I’ve seen those nicer ones! Even found a lifetime warranty one for $150. I just haven’t pulled the trigger yet.
Take the doors off put the cherry picker through the door opening to the middle of the cab get some straps around the floor lower the cherry pi code as low as possible lift the cab slide4x4s under the cab and put supports under the 4x4s high enough to role the cab crime under it
I may try that next time! Thanks for watching and the comment!
How does one get a Half Ass Hot Rods cap?
I'm probably doing another run of the leather patch hats very soon!
Three on the tree?
Yessir! ...not for long though...
Basically rebuilt leaf pack, lol. Not.
No, no it wasn't.