I forgot about the plexiglass when I glued the front pieces on, and had to cut the glue at the top. There is enough space to slide the plexiglass through if you glue on the bottom front pieces, and ONLY glue the sides of the top front piece. Do NOT glue the top. It has just enough space to slide the plexiglass through. It is a tight fit, but it works. Just keep in mind it is difficult to get the plexiglass back out, so finish the inside completely first. Good luck!
Did you have any issues with the lighting? My turns on for a couple of seconds and then just flashes instead of staying on. I called it good, and then I saw your video, so I thought I'd ask
@@ericviger4984 the lights are motion sensor, which I finally found out after freaking out about the light flickering on and off after flipping the on switch. Leave the switch on, then step away from the motion sensor button thing at the bottom front, and then after the light goes off, move your hand in front of it to see if the light turns on again. If you are not getting consistent motion sensing lights, I would check your wire connections or batteries. Hope this helps!
@Djcraftyasmr I knew it had the motion sensor, it just doesn't stay on for long. If I move in front of it, it turns out and back off a second later. Like I said, it is what it is. I still enjoyed building it, still a win in my book!! Thanks for the reply 👍
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
Beautiful dollhouse thank you for sharing
Thank you 😁
What sort of glue do you use ?
I use E6000 (or the gorilla glue that is similar to it) for the wooden parts, and an Elmers glue stick for the paper parts.
@ thank you😁👍
Im afraid I won’t have space to slide the plexiglass into place in if glue the front 2 pieces on. Help!
I forgot about the plexiglass when I glued the front pieces on, and had to cut the glue at the top. There is enough space to slide the plexiglass through if you glue on the bottom front pieces, and ONLY glue the sides of the top front piece. Do NOT glue the top. It has just enough space to slide the plexiglass through. It is a tight fit, but it works. Just keep in mind it is difficult to get the plexiglass back out, so finish the inside completely first. Good luck!
Did you have any issues with the lighting? My turns on for a couple of seconds and then just flashes instead of staying on. I called it good, and then I saw your video, so I thought I'd ask
@@ericviger4984 the lights are motion sensor, which I finally found out after freaking out about the light flickering on and off after flipping the on switch. Leave the switch on, then step away from the motion sensor button thing at the bottom front, and then after the light goes off, move your hand in front of it to see if the light turns on again. If you are not getting consistent motion sensing lights, I would check your wire connections or batteries. Hope this helps!
@Djcraftyasmr I knew it had the motion sensor, it just doesn't stay on for long. If I move in front of it, it turns out and back off a second later. Like I said, it is what it is. I still enjoyed building it, still a win in my book!! Thanks for the reply 👍