Nice 👍 I’ve been considering copper pipe to run my heater pipes back & forth with a minimum length of silicon pipe to the engine for tidiness (and just to be different)……… we’ll see 😊
The wrap looks good on the manifold, against the red rocker cover. I'm hoping you video the breather and oil catch tank neat job, Dave. Greatly enjoyed.
Nice job again Dave. I've made up a lot of replacement fuel lines using 6mm and 8mm copper and used the olive trick for the rubber hoses. I just soldered mine on, simple and very effective.
All looks good. Do you think that breather is okay as is, once the other end is attached it will obviously be more secure, or would it be worth adding a support bracket further along, maybe to the rear of the head?
Love the videos, keep it up. P.S you should not be wearing gloves with rotating equipment. That glove catches on the drill and there goes your finger or more. Stay safe.
Good use of your plumbing skills Dave. Looking forward to the balanced flu episode… 😂
🤣🤣 thankd
Nice 👍 I’ve been considering copper pipe to run my heater pipes back & forth with a minimum length of silicon pipe to the engine for tidiness (and just to be different)……… we’ll see 😊
The wrap looks good on the manifold, against the red rocker cover.
I'm hoping you video the breather and oil catch tank neat job, Dave. Greatly enjoyed.
Thank you 😊
this is great dave, I once fabricated my own breathing set up for a pinto, I never thought to use copper pipe! 😎
A nice plumb fit , lovely job with the four branch glad you have got them jobs wrapped up 👍
🤣
Looking good Dave, very neat and tidy. Cheers Marty's projects 👍
Thanks Marty
Nice and neat. 👌
Dave that is a what you call engineering
Thank you 😊
Nice job again Dave. I've made up a lot of replacement fuel lines using 6mm and 8mm copper and used the olive trick for the rubber hoses. I just soldered mine on, simple and very effective.
Thanks Bob, yep I've soldered rings on also if I need one either side.
Nice work and again with things around the garage. Enjoyed again fella
Good job looking forward to next video
Great Work, Glad you are kneeling on Something. I appreciate you.
Good job well done mate.
Love your videos. Can wait to see this finished.are you fitting a rear/half roll cage Dave?
Hi, thanks, nope I won't be fitting a roll cage, will be fitting rear seats 😊
Hi Dave when are you thinking of painting the body?
Hi Mark, once I've got it back on its wheels and movable
@@DavesGarageuk Look forward to it, your doing a fantastic job best of luck👍
You still in Wales only you’re outside and it’s not raining😊
🤣
All looks good. Do you think that breather is okay as is, once the other end is attached it will obviously be more secure, or would it be worth adding a support bracket further along, maybe to the rear of the head?
I'll sort brackets out later once I've got all the other guff in place
One for analytics
Love the videos, keep it up. P.S you should not be wearing gloves with rotating equipment. That glove catches on the drill and there goes your finger or more. Stay safe.
Thanks 😊
🚗