The most helpful video I have watched for GHK M4. Should be pinned in any group to do with GHK M4’s. I have watched and referenced this video dozens of times. Thank you so much for this great resource
Helped me with Golden Eagle GBBR (WA standard). Didn't know how to remove Bolt nozzle. It's so different than WE standard that I'm used to (pins holding it in place)
in need of a re-assembly video. specifically how to reinstall the sear. I have an ambi selector switch I want to install but am scared to install something wrong or not know how to reinstall it.
Hi do you happen to know what the wire size is for the hammer spring? that would be very usefull info for my fgc6 /partisan 6 project to make sure i'm a bit on spec parts wise
Huh, I didn't realize that GE made gas blowback gel blasters. That's pretty cool. I don't know how much was changed to accommodate the gels, but the airsoft versions are very similar. GHK, VFC, GE and Vipertech are all based on the Western Arms system.
@@thatgbbguy pretty much just the mag and barrel assembly are different I have 2 short videos on my channel that are overviews of them will be doing a maintenance video soon on them
Just watched both of them, very interesting stuff. As an airsoft player, that magazine loading system is pretty different. I kind of wish there was a good way of determining the ammo left in the airsoft version mags.
@@coreyrich2567 No problem! Even though I'll probably never own a gel blaster, they look surprisingly interesting. No pressure, but I'd be pretty excited for a closer look at the internals of the GE.
Alright, I have a few ideas. However, I've never had to fix this issue for myself, so I'm just hoping that these will work for you. I would try shimming the sides of the upper receiver leg(s) with pop can aluminum strips and file to fit. I think that would tighten it up properly. And JB Weld should hold it securely. Hope that works for you, I'd just make sure that it fixes the issue before applying the epoxy 🙂.
![Megan Thee Stallion - Neva Play (feat. RM) [Official Video]](http://i.ytimg.com/vi/TpYTyAaTRts/mqdefault.jpg)
The most helpful video I have watched for GHK M4. Should be pinned in any group to do with GHK M4’s. I have watched and referenced this video dozens of times. Thank you so much for this great resource
Wow, thank you so much! I'm glad that you have found this guide so useful, it really helps me stay motivated to continue making this kind of video.
i dont even have a GHK M4, i just watch this because I enjoy the quality of production of your videos lol, great work!
Thanks! I'm glad that you like the quality, it means a lot to me.
Great guide! I will be using it when transferring the internals to my new forged receiver.
Thanks, glad you like it!
Helped me with Golden Eagle GBBR (WA standard).
Didn't know how to remove Bolt nozzle. It's so different than WE standard that I'm used to (pins holding it in place)
Glad you found it helpful 😀
Just got into the game with used ghk m4 that had some funky stuffs going inside it, this helped me alot mate thanks.
I don’t even have a GHK M4 I have EMG gbbr and it helped me a lot watching your video fixing my gun. Keep it up your making great videos!
Thank you!
Such a good video man. Thank you for your work. You’ve made my life a lot easier. Please make more!
Glad you found it helpful! It's good to know that people are enjoying this kind of video! 😄
in need of a re-assembly video. specifically how to reinstall the sear. I have an ambi selector switch I want to install but am scared to install something wrong or not know how to reinstall it.
This video contains both the disassembly and reassembly. If there are any specific questions you have, let me know 🙂
“Do not lose this little locking ring“ i mean yea bro, thanks, should have said that beforehand
lol I just dumped all the inside of the m4 out by accident your video saved me
Thank you so much for the information
That's a very helpful video. I still hope, that I'll never need to do all that 😂
Lol, I'm really hoping that I never have to do it again! But, I'm glad that you found it helpful 😀
Very nice and chill video. Many thanks ! 🙂
Glad you like it! 👍
Hi do you happen to know what the wire size is for the hammer spring? that would be very usefull info for my fgc6 /partisan 6 project to make sure i'm a bit on spec parts wise
Great video it’s very similar to the GE GBBR gelblaster
Huh, I didn't realize that GE made gas blowback gel blasters. That's pretty cool. I don't know how much was changed to accommodate the gels, but the airsoft versions are very similar. GHK, VFC, GE and Vipertech are all based on the Western Arms system.
@@thatgbbguy pretty much just the mag and barrel assembly are different I have 2 short videos on my channel that are overviews of them will be doing a maintenance video soon on them
Just watched both of them, very interesting stuff. As an airsoft player, that magazine loading system is pretty different. I kind of wish there was a good way of determining the ammo left in the airsoft version mags.
@@thatgbbguy yeah people over here don’t like it but I think it’s a great idea and works really well
And thank you for subscribing to my channel
@@coreyrich2567 No problem! Even though I'll probably never own a gel blaster, they look surprisingly interesting. No pressure, but I'd be pretty excited for a closer look at the internals of the GE.
thanks for this man
No problem! 😀
Is it possible to replace the front sight block with a different AR FSB?
The Delta ring is not aligned when i tightened it😢
The delta ring can be freely rotated after tightening the nut down. So you should be able to just line it up manually. Hope that helps 😃
Hey are you using the stock GHK M4 V2 inner barrel on your T.N.T hop up chamber? Do it is 100% compatible?thanks
Yes, I'm like pretty sure that's the original barrel. Looking at my order history, it doesn't look like I ever ordered any other barrel.
@@thatgbbguy thank you
Lovely video! Do you happen to have any advice for wobble between the upper and lower? thanks!
Alright, I have a few ideas. However, I've never had to fix this issue for myself, so I'm just hoping that these will work for you.
I would try shimming the sides of the upper receiver leg(s) with pop can aluminum strips and file to fit. I think that would tighten it up properly. And JB Weld should hold it securely.
Hope that works for you, I'd just make sure that it fixes the issue before applying the epoxy 🙂.
Would this be the same or similar to vfc's mcx or m4?
Both VFC and GHK m4 are clones of the WA system, so they should be pretty similar.
BK家过来的😅