Hello, I just wanted to ask if it's necessary to dismantle the entire magazine in order to file it? I'm assuming that you dismantle it so the spring and feeder dont' get in the way of filing? Just asking since I have 7 mags to go through haha.
@@reff942 thanks for the info! I'm running into quite a lot of trouble taking out the feedlip itself (cracked one, cut the rubber grommet on another). Is there another better way to take this damn thing out without completely breakign it? It doesn't come out flawlessly as yours did
hey bro nice video. what do you call the tools you used? like the pin pusher etc. im newbie i ordered ghk mk18. im searching video like this to prevent my ghk to have problem.
Hey, welcome to GHK master race family! Check your rifle when received for QC issues while in warranty. In the video I used pin punches (1,5mm / 2mm), rubber hammer, hammer, gunsmith bench block and file. Take care of your rifle and you will have a lot of fun! :>
@@reff942 thanks for reply bro. bro i have suggestion. can you make a video on what to check for qc after unboxing the bnew ghk. it would help a lot of newbie people like me. like need to fix, etc.. or need to upgrade.. something like that,.. to tell you the truth i have no idea what to check or how its work's lol.
Good video, i have a question though. I have the golden eagle wa magazines for the mk18. However one of them leaks, i checked the valves and they dont look worn out or anything. Any tips on how to fix that. Also every time i shoot it doubles feeds or doesnt cycle correctly.
Remove mag shell and sink the mag into the water. That will show you exact leak spot. Double feed usually means broken or cracked lips. How is mag to nozzle seal? Does nozzle stick on the mag for a bit during cycle?
question my gun ghk akm gbbr i have problems with two mag ak74 when i shooting about 6-7 bbs rolling out outer barrel i mean when shoot bbs have to rolling out and then normal shoot any bbs
Hi, do you have this issue with all mags, or only with two and the rest is fine? If only two are bad, your feed lips could be already broken and it cant handle the pressure from magazine spring. After releasing some bbs the pressure is lower and even broken lips can handle it. Check it, usually it is broken right in the middle.
There a way to fix the Mag lever that lifts up the bolt catch when empty to catch the bolt? it doesn't go high enough or my mag won't go high enough to catch the bolt, the bolt cycles and goes home every time even on empty
You can gently bend bolt lock part down, so its pushed up sooner on empty. Remove part from the rifle to prevent damaging lower receiver berofe adjusting.
@reff942 it's okay I eventually figured it out, I disassembled the mags and added material around the lever tab that activates the Bolt Catch when mags are on empty, so now they sit higher which is just high enough to push that Bolt Catch lever all the way up and Catch the Bolt everytime on empty. They're Golden Eagle MK18/PMAGs but they're nearly identical to the GHK Ones in terms of build.
Clear and concise. Thanks!
Any tutorial on GHK M4 mags fitting problem into magwell? Some fit perfectly, others have to be puled with force
Since I never encountered this issue I have no way to replicate it.
Hello, I just wanted to ask if it's necessary to dismantle the entire magazine in order to file it? I'm assuming that you dismantle it so the spring and feeder dont' get in the way of filing? Just asking since I have 7 mags to go through haha.
Hi, if you don't dismantle it completely you can damage your gas route. But it can be done.
@@reff942 thanks for the info! I'm running into quite a lot of trouble taking out the feedlip itself (cracked one, cut the rubber grommet on another). Is there another better way to take this damn thing out without completely breakign it? It doesn't come out flawlessly as yours did
@@JaeJaezX1 Try to gently tap it out with rubber/plastic hammer.
hey bro nice video. what do you call the tools you used? like the pin pusher etc. im newbie i ordered ghk mk18. im searching video like this to prevent my ghk to have problem.
Hey, welcome to GHK master race family! Check your rifle when received for QC issues while in warranty. In the video I used pin punches (1,5mm / 2mm), rubber hammer, hammer, gunsmith bench block and file. Take care of your rifle and you will have a lot of fun! :>
@@reff942 thanks for reply bro. bro i have suggestion. can you make a video on what to check for qc after unboxing the bnew ghk. it would help a lot of newbie people like me. like need to fix, etc.. or need to upgrade.. something like that,.. to tell you the truth i have no idea what to check or how its work's lol.
What is that tool you used that had the holes so you can push the pins out without hitting the table? Where can I get one?
Gunsmith bench block.
@@reff942 Thanks! Appreciate it.
Good video, i have a question though. I have the golden eagle wa magazines for the mk18. However one of them leaks, i checked the valves and they dont look worn out or anything. Any tips on how to fix that. Also every time i shoot it doubles feeds or doesnt cycle correctly.
Remove mag shell and sink the mag into the water. That will show you exact leak spot. Double feed usually means broken or cracked lips. How is mag to nozzle seal? Does nozzle stick on the mag for a bit during cycle?
@@reff942 okay ill try that. and it looks like it doesn't stick on the mag, it cycles all the way through.
Solid vid.
question my gun ghk akm gbbr
i have problems with two mag ak74
when i shooting about 6-7 bbs rolling out outer barrel
i mean when shoot bbs have to rolling out and then normal shoot any bbs
Hi, do you have this issue with all mags, or only with two and the rest is fine? If only two are bad, your feed lips could be already broken and it cant handle the pressure from magazine spring. After releasing some bbs the pressure is lower and even broken lips can handle it. Check it, usually it is broken right in the middle.
There a way to fix the Mag lever that lifts up the bolt catch when empty to catch the bolt? it doesn't go high enough or my mag won't go high enough to catch the bolt, the bolt cycles and goes home every time even on empty
You can gently bend bolt lock part down, so its pushed up sooner on empty. Remove part from the rifle to prevent damaging lower receiver berofe adjusting.
@reff942 it's okay I eventually figured it out, I disassembled the mags and added material around the lever tab that activates the Bolt Catch when mags are on empty, so now they sit higher which is just high enough to push that Bolt Catch lever all the way up and Catch the Bolt everytime on empty.
They're Golden Eagle MK18/PMAGs but they're nearly identical to the GHK Ones in terms of build.
Prasknou stejně...cnc je cesta :)
Už ani nevím, kolik měsíců mám objednáno :D
@@reff942 ja se dočkal po 7 měsících 😁
still cracking with this ?
@@bigbuna Yes, sooner or later
@@bigbuna Running mags like this for a year now, no crack so far. But yes, it is still possible.