Thanks for the memory jog. I couldn’t for the life of me remember how to activate a flight plan. I loaded one and hit the menu and just missed it. I activated the approach since my flight plan had me going direct to the IAF. This was practice only not done during an actual ifr flight
Learned to fly at VGT back in 1979. Lone mountain was way out of the city and used as a landmark to tell tower when coming from training area. Fun times!
This is a very helpful video for understanding how to build a flight plan. It would be even more helpful if at about 2:10 minutes you highlighted the fact that you have to twist the large knob COUNTERCLOCKWISE to bring the cursor back to life. You show moving the cursor after you got it back, but you never told us how you got the cursor to reappear on the Create page. It would also be helpful if you also showed how to create a waypoint using a radial and dme, carefully explaining each move of the large and small knobs. It would also be helpful to do the same with an intersection of 2 radials, or an intersection.
Good information, however, you went too fast. It would be helpful as some of us are trying to take notes. You clearly are very familiar with this procedure - we are trying to learn the concept. Thank you for taking the time for this video.
Thank you so much. Very clear and easy to follow
Thanks. Simple, Easy to remember
Simple and clear, thank you! Just what I needed:)
Thanks for the memory jog. I couldn’t for the life of me remember how to activate a flight plan. I loaded one and hit the menu and just missed it. I activated the approach since my flight plan had me going direct to the IAF. This was practice only not done during an actual ifr flight
Thnx dude , this means a lot.
Nice job… Did my initial flight training at VGT (1993)
Learned to fly at VGT back in 1979. Lone mountain was way out of the city and used as a landmark to tell tower when coming from training area. Fun times!
This is a very helpful video for understanding how to build a flight plan. It would be even more helpful if at about 2:10 minutes you highlighted the fact that you have to twist the large knob COUNTERCLOCKWISE to bring the cursor back to life. You show moving the cursor after you got it back, but you never told us how you got the cursor to reappear on the Create page.
It would also be helpful if you also showed how to create a waypoint using a radial and dme, carefully explaining each move of the large and small knobs. It would also be helpful to do the same with an intersection of 2 radials, or an intersection.
Good information, however, you went too fast. It would be helpful as some of us are trying to take notes. You clearly are very familiar with this procedure - we are trying to learn the concept. Thank you for taking the time for this video.
Started out great just build the flight plan as your title says, maybe do another video for waypoints
Out of focus can’t understand what’s happening
Me, with 260 hours in planes all with 430’s… thank you
Hand often obscures what is happening with knob twisting / button pushing and without a describing narrative (40% of time) it’s not very helpful.
You hands is in the way man
Like Ricky Bobby, I don't know what to do with my hands
OK well that was a waste