“When you buy your first wheels you won’t be experienced with the history of the brands.” Ummmm actually I watched all the Fitment Inc history videos so... I’m basically a pro.
Yeaaahh that car he showed when talking about stance nation was hideous. I like how it's a video essentially about how tires are what matter most when doing this process, but also shows lots of vehicles with camber some of which were absolute trashy looking with the wheels bent or so far you'll blow through those tires in no time.
7:07 "on Corvettes" the truth hurts. My Vette has fender tuck for days. Can't wait to get a set of wheels to get a nice flush look, nothing too extreme. I just want a clean modern look.
Sometimes that will happen! 😂 Whenever you need help with fitment or ordering a set of wheels hit us up for real!! We would love to help you get setup with something! 🔌😂
I bought my first set of after-market rims in 1991 for my then new 1990 Dodge Shadow. The rims were from American Racing & were about 700 bucks. One hundred dollar (which was a lot then) tires all around for just over 1200 out the door. The next year I got some Yokohama's which is the best tire brand I have ever owned. This industry has come a long, long way in the past 28 years.
I really love and appreciate what you guys are doing with these educational videos and I just want to say from the bottom of my heart thank you for being a part of RUclips and putting out these wonderful videos and I love them so much. Please keep it up and I can't wait for more content from you guys.
Tim, Thank you so much for the support, we truly appreciate it. Just be sure to keep letting us know what you want us to talk about and we'll keep making the videos. If you ever need help with this stuff, you know how to get ahold of us! www.fitmentindustries.com
This helped so much! I owned a 2017 VW Golf Sportwagen with 15x6 ET 46 wheels wirh 195 65 15 tires and wanted to run a more aggressive 15x6.5 ET 43 set of wheels with the same size tires. Now Slighly stretched. I loved the look. That was nice! After seeing this video and many similar videos, I went all out with a totally aggressive 15x7 ET 40 setup with super wide low profile 205 60 15 tires. They fit without any fender rolling nor inner trim.
Plus the offset number is the same because it measures from the center of the wheel either in or out. So what needs to be taken into account is your wheel width
245/45R20 for a 4,100 lbs sporty Honda "Wagon" (AT FWD/4WD). Zero problems with crappy NYC roads. 245/45 = 110 mm side wall, I think 240/40 = 98 mm side wall is about as low profile as you'd want to go in areas with bad roads. I personally wouldn't run that low in NYC or anywhere else in the North East.
I just got my first set of wheels and tires from you guys a couple of weeks ago. I ended up needing to get 8mil spacers and extended thread lug nuts because they hit my front calipers by like 4 millimeters lol getting it wrong the first time does suck...Trust me
Also should mention that while good fitment is great for the aesthetic, it's absolutely crucial for performance. If you take a sports car for example; the manufacturer normally designs every aspect around performance, wheelbase, size, design, orientation of the engine, and even wheel size and offset! If you go get some wheel that just fits and you like the looks, you might be ruining the handling of your vehicle! So if you value keeping your car on the track but want your wheels to look good, talk to the professionals about fitment! You might even be able to improve handling!
Very informative video! Was hoping I could get some more detail on increased suspension/steering wear on more aggressive offsets. A lot of people don't really know that flush or near flush doesn't mean good fitment either. I appreciate that you recommend going more conservative for your first set but wish to elaborate on the pros and cons.
Thank you so much for this quality video. I'm currently educating myself to wheel knowledge so I can purchase my first set of tires. A video like this is something a noob like me needs
Got my first set of Wheels and rubbers recently. I got them for my project car its a 1993 Japanese imported Efini FD3S RX7 - R2. I got 18" Rays gram lights with custom powder coat blue with Goodyear eagle f1 tires.
I would love to but ts far from finished so I doubt it would be worthy of your gallery and i presume you don't have a section for project cars in the making lol.
I went off of somebody elses setup. I was looking at 18x9.5 for a tC but I found this nasty fitment for 17x8.5 and it looks even better. Gotta research this shit.
Another tip. Try to use paper of cardboard to figure out what could fit. It is a bit like guessing, but in our case then at least we knew what was THE maximum we could go with the OEM offset and where we could go with a different offset. From there on we searched and searched more to find THE best fitting wheels and tires. I tried this on my recent first car. And we went from a 145/x/r13(x is not displayed) ET0 (offset 0mm) to a 165/55/r15 ET35, and they look amazing! The wheels and tires were not a massive purchase. Since I am a newbie driver we decided to go with steelies and some nice sticky rubber. Thanks Fitment Inc. !!
I’ve been emailing you guys and getting a little direction, but honestly, I think at some time In the future, you guys should do an exhaustive series about definitions and meanings and words and diction. Love you Alex!
I'm still looking for my first set of wheels for my frs since the day I bought it. All my friends runs te37, rpf, renform, and BBS wheels, it's hard to find something different and is a budget wheels that fits in my budget.
Kong Lor check out jnc they have every style and color you could ask for. Plus they have some of the cheapest prices you'll find. My rims were 400 shipped
Don’t worry about what your friends run man. Get something you like. You don’t have to buy billet just to fit in I promise. Cheaper wheels get hate, but also respect from others in the same boat that don’t want to drop all the funds on forged. I have had everything from CCW/Work/Rays/AMERICAN Force/Enkei all the way to konig, rota, str, ruff racing. All about what you wanna do. Some high quality wheels are ugly. Some lower priced wheels look sick. The FRS is a great platform to make nice. And don’t take much effort.
We have tons of videos that can help you with that Kong. Check it out here: ruclips.net/video/hvTIdWT-XWE/видео.html&t Also, just email us and we can help you out at Wheels@fitmentindustries.com
i just got my first set of aftermarket rims for my dodge dart from you guys a couple months ago and i think i nailed it good i hope y'all add my car to the gallery its 2013 doge dart sxt and i went with 18 by 8 touren tr9 offset 40 with some mickey Thompson street comps 245/40/r18 love them
they don't really poke noticeably but when you look to the side of the car you can see the wheel coming out a little bit but really only a few millimeters. normally in my country it's illegal to have your wheels poking but at the yearly vehicle inspection they didn't even notice it.
About to check out the Fitment Industries site. Your vids have been thoroughly informative and didn't make me feel like I was watching grass grow. Looking forward..
I dont know if these are good tires but I OEM rims but after market tires. Their called Fuzion touring tires, I dont know if they're good or not though or if I buy wheels for the first time they'll look good on the wheels, the compound I round out are pretty good. Soft but not to soft, they get great grip. I put the wheels on my avenger and they ran really well at higher speeds.
Working on it! We are working on adding so much new stuff to our site all the time, It just literally takes forever because it is a lot of stuff to put on the site there are tons of details! 😂
I have a mustang 2012 and I bought 20×10 AMR and the riding quality been so good and I been having 21 miles MPG BEFORE and now It's 18 MPG yes I love how they looks like but I get made when I see how bad is riding quality being right now, 18 or 19 inches wheels are the best wheel I had experience with in my old 2007 Mustang GT
First set of aftermarket rims and tires i bought were BBS SR in machined alloy with matte black accents with Pirelli Corsa System Direzionales on them. 235/35R19
My OEM integra wheels were 195/60/R14 I bought new wheels and tires with dimensions 195/60/R15 and they fit they like a glove. Only thing that changed was the rim size that’s it. I was playing it safe but now that I think of it I could’ve put 205s on cause 195 is pretty skinny.
wrong. the circumference increased; 195/55/15 would be correct, you could do 205/50/15 and it would also closely match oem circumference. with you current tires, your speedometer is off by over 4%; so when guage reads 60, you are going about 63.
Kuro Murasaki I actually did not know that. I knew it would affect my speed but I didn’t think it would throw my speedometer off. I really wanted to get 55 but I stuck with 60 cause the roads in ohio have lots of potholes and I wanted a little more meat on the tire to absorb the bumps.
Luckily, my the wheels I bought fit my car perfectly, even the hub bore was perfect; in hindsight, it makes sense because I bought Nismo wheels for a Nissan, and those wheels were made for my car... You can find those wheels on Fitment industry's YT or simply search on YT "reacting to rare wheels sent by fan": P
@@FitmentIndustries English/American is not my native language, and that made it a little hard to follow as I couldn't keep up whit all the info. Apart from that I love this videos
Danm that was informative. You should have made the vid longer imo. We all need to be reminded every once in a while about what really is important newbie or not. One rule that matters as well is size does matter hehehe. Go for a +1 no more than a +2 when going up in overall diameter on your rim size (17in rim up to a 19in) is always safe. Wish I had you guys around in the early 90's when I was buying my first set of shoes for my ride. You guys were on point as always!! Thks guys
Really great advice Alex. But I cannot agree with the term, aftermarket tires. You are referring to O.E. tires, not aftermarket tires. Good work and I'll keep watching your videos until I have decided to switch wheels on the E91.
I'm in a 9th gen accord page and got a relatively good idea of what wheels would fit. I didn't actually have to do that much research. Then again I haven't got my wheels yet either. I only order them yesterday though
Any suggestions of wheel / rim brands for a honda civic? This is my first car aswell as my first time purchasing wheels, im not tryna spend too much money, any brands that wont break the buck?
There are TONS out there brother! What I would recommend is going on out gallery and find what other people have on there Civic's to see what you think looks best! 👍bit.ly/2Ma4oca
I always thought thin rims (not talking tire profile) a more wire frame because there is less weight to turn. I also thought thicker tires at the front were better for the front tires and bigger at the back for rear wheels but I don't understand what is better.
Great video. However note that some cars will give you issues with changing the tire profile as making the entire wheel smaller or bigger can cause modern cars to freak out and cause issues with ABS and things like that, I’m no expert, just saying as I have been made aware of this issue by another expert when i was looking to buy a set of wheels and tires for my 2007 Mazda miata. good luck everyone
Why is this so true...I will more than likely be in touch with you guys as I'm new and yes! I want to get it right first time lmao...keep up the hard word guys!!!
Lmao...I just reached out to you guys about my 2 dr Blazer & boom!...you upload this video. I almost feel as if my newbie line of questions prompted this vid. Trying to find wheels is STILL a pain in the a$$. I'm not a big fan of most of the wheels that fit my truck. I guess I'll need some more education to find the exact look I want to achieve. I have a vision of what I want but trying to convey that to the pros is the difficult part. Have you ever seen a Blazer with a V8, possibly custom over fenders & concave, tuner style wheels? I doubt it but you just might. 😉
Ok i get it its been about 15 yrs that i have not put rims on a car i wasnt to put some aftermarket rims on my 2018 ford ecosport ese i like whats on but the look little i think i want something bigger than 17 inch but the model selection doesn't have it.. what know?
@Mugshot Marley and @IS300 EV are right, we'll definitely get this fixed for you man! Shoot us an email at wheels@fitmentindustries.com and we'll get it fixed stat.
Hi Fitment Industries. Love all of your videos! Very helpful and relaxing to unwind to. I had look at your website to look at wheels for my car but my model is not listed. I have a 2000 Nissan Primera P11 and i'm looking at buying my first set of wheels. Cheers
Hey Ethan, Thank you for the support! Glad to hear you find our videos enjoyable, I was looking and I cannot find wheels either HOWEVER! We can still look for you, Just shoot us an email at shop@fitmentindustries.com and we can help you from there!
“When you buy your first wheels you won’t be experienced with the history of the brands.” Ummmm actually I watched all the Fitment Inc history videos so... I’m basically a pro.
That's what we're here for!
OMG that BMW used its blinkers😱😱😱
👀👀
WOKE
Ikr, it was such a majestic rare sight
It was for the camera 😂😂😂
lol
If you're modding your car for Instagram then you're doing it wrong.
Alex Cheetah finally, someone on RUclips who properly uses “you’re” lmao
Yeaaahh that car he showed when talking about stance nation was hideous. I like how it's a video essentially about how tires are what matter most when doing this process, but also shows lots of vehicles with camber some of which were absolute trashy looking with the wheels bent or so far you'll blow through those tires in no time.
Love the web sight unfortunately you guys didn’t have the rims I was wanting
Ryan O'Brien I’ve been using your and you’re correctly, but no one ever said, “Finally, someone who knows how to use it!”
@@cooliecrewspeedshop *Youŕè
U guys always fill up that empty spot in the car community on the internet and thats setting up wheels, rims, tires etc, thanks for the help!
I bough Volk te37’s before watching this and I have a bicycle... I’ll make em fit😤💪🏿
dead lmao
te37 is legit. they even fit my toilet.
I always say, buy wheels and make the transportation fit them hahaha
They look good on everything I got them on my lawnmower .... it's a subi
Haha im with you i got lexani LX10 20 inches 275/45R20 et15 gotta get spacers for the front then mesure and figure out what i need to even the back
7:07 "on Corvettes" the truth hurts. My Vette has fender tuck for days. Can't wait to get a set of wheels to get a nice flush look, nothing too extreme. I just want a clean modern look.
Sometimes that will happen! 😂 Whenever you need help with fitment or ordering a set of wheels hit us up for real!! We would love to help you get setup with something! 🔌😂
When you scroll too far and do a double take 👀
Quality rubbers r a must 😏
Ghetto Gecko are you selling me tires or condoms?
Depends on what you like riding on.
W.
Most def
Yea i bought one from the 7 11 bathroom thats how my girl got pregnant. Buy quality rubbers please
Offset is important and so it Quavo.
HANNNNNNCHOOOOOOOOO 🔥
@@FitmentIndustries huncho*
Offset was taken under cardi b’s wing he gone
I'm 17 buying my first wheels, and at first I thought it was whatever but now looking into it for a week my brain is dead lmao
Me too bro, me too
@@jonathanchapman3199 same here
Yup
I bought my first set of after-market rims in 1991 for my then new 1990 Dodge Shadow. The rims were from American Racing & were about 700 bucks. One hundred dollar (which was a lot then) tires all around for just over 1200 out the door. The next year I got some Yokohama's which is the best tire brand I have ever owned. This industry has come a long, long way in the past 28 years.
Never go cheap on tires.
NEVER.
Except for drifting...
you speak the big true true
Unless your that one guy just doing smoky burnouts in his hellcat.
Unless you just driving stop and go in city
Daniil Kaizer got a car, Previous owner went cheap on tires, I Tokyo drift if I even hit 5 mph
I really love and appreciate what you guys are doing with these educational videos and I just want to say from the bottom of my heart thank you for being a part of RUclips and putting out these wonderful videos and I love them so much. Please keep it up and I can't wait for more content from you guys.
Tim,
Thank you so much for the support, we truly appreciate it. Just be sure to keep letting us know what you want us to talk about and we'll keep making the videos. If you ever need help with this stuff, you know how to get ahold of us!
www.fitmentindustries.com
U earned a customer
🖤🖤Thanks for the support!
This helped so much! I owned a 2017 VW Golf Sportwagen with 15x6 ET 46 wheels wirh 195 65 15 tires and wanted to run a more aggressive 15x6.5 ET 43 set of wheels with the same size tires. Now Slighly stretched. I loved the look. That was nice! After seeing this video and many similar videos, I went all out with a totally aggressive 15x7 ET 40 setup with super wide low profile 205 60 15 tires. They fit without any fender rolling nor inner trim.
It’s like how some people think offset like a +25 is the same on a 6 inch wide wheel vs a 8 inch wide. You’ll need to calculate it again
Truth!
OFFSET is the same regardless of wheel width..... how much poke you get is different. Your comment is almost as terrible as this video
As you can tell, I’m saying that. Didn’t mean to tickle your ass with a comment that’s saying as much as what you’re saying.
Plus the offset number is the same because it measures from the center of the wheel either in or out. So what needs to be taken into account is your wheel width
i saved up for so long to get my TE-37 SL for my Evo9. never going to go with anything else. Great video!
how you gunna leave your boys lacking wheel locks are 100% necessary alot of times thieves dont even try if it has a lock lug
Definitely
245/45R20 for a 4,100 lbs sporty Honda "Wagon" (AT FWD/4WD). Zero problems with crappy NYC roads. 245/45 = 110 mm side wall, I think 240/40 = 98 mm side wall is about as low profile as you'd want to go in areas with bad roads. I personally wouldn't run that low in NYC or anywhere else in the North East.
I just got my first set of wheels and tires from you guys a couple of weeks ago. I ended up needing to get 8mil spacers and extended thread lug nuts because they hit my front calipers by like 4 millimeters lol getting it wrong the first time does suck...Trust me
Best AD ive ever seen in my life, props
Also should mention that while good fitment is great for the aesthetic, it's absolutely crucial for performance. If you take a sports car for example; the manufacturer normally designs every aspect around performance, wheelbase, size, design, orientation of the engine, and even wheel size and offset! If you go get some wheel that just fits and you like the looks, you might be ruining the handling of your vehicle! So if you value keeping your car on the track but want your wheels to look good, talk to the professionals about fitment! You might even be able to improve handling!
Very informative video! Was hoping I could get some more detail on increased suspension/steering wear on more aggressive offsets. A lot of people don't really know that flush or near flush doesn't mean good fitment either. I appreciate that you recommend going more conservative for your first set but wish to elaborate on the pros and cons.
Thank you FI sorry I’ve been gone for a few days but I’m back and can’t wait to start grinding the videos again
Holy shit all these numbers stressing me tf out rn since im new to this car stuffiziz😂
If you ever need more help on your fitment don't hesitate to shoot the team here an email at wheels@fitmentindustries.com and we can help you more!
Thank you so much for this quality video. I'm currently educating myself to wheel knowledge so I can purchase my first set of tires. A video like this is something a noob like me needs
Got my first set of Wheels and rubbers recently. I got them for my project car its a 1993 Japanese imported Efini FD3S RX7 - R2. I got 18" Rays gram lights with custom powder coat blue with Goodyear eagle f1 tires.
Make sure to throw it on our gallery! That sounds badass!
www.fitmentindustries.com/add-wheel-offset
I would love to but ts far from finished so I doubt it would be worthy of your gallery and i presume you don't have a section for project cars in the making lol.
gosh, you guys are stance scientists.
SCIENCE
Stance-ientist
Stancientist
@@ZyNgInaMo Stanceologist
I went off of somebody elses setup. I was looking at 18x9.5 for a tC but I found this nasty fitment for 17x8.5 and it looks even better. Gotta research this shit.
Bad start, Im 22 years old but im POOR
Another tip. Try to use paper of cardboard to figure out what could fit. It is a bit like guessing, but in our case then at least we knew what was THE maximum we could go with the OEM offset and where we could go with a different offset. From there on we searched and searched more to find THE best fitting wheels and tires. I tried this on my recent first car. And we went from a 145/x/r13(x is not displayed) ET0 (offset 0mm) to a 165/55/r15 ET35, and they look amazing! The wheels and tires were not a massive purchase. Since I am a newbie driver we decided to go with steelies and some nice sticky rubber. Thanks Fitment Inc. !!
This channel is underrated!
If you buy bolt pattern adapters and intend to swap with OEM wheels in the winter make sure your studs are short enough...
I found (IMO) decent wheels and tires on the fitment website for around $900 all together 😭 sounds to good to be true
I’ve been emailing you guys and getting a little direction, but honestly, I think at some time
In the future, you guys should do an exhaustive series about definitions and meanings and words and diction. Love you Alex!
I'm still looking for my first set of wheels for my frs since the day I bought it. All my friends runs te37, rpf, renform, and BBS wheels, it's hard to find something different and is a budget wheels that fits in my budget.
Kong Lor check out jnc they have every style and color you could ask for. Plus they have some of the cheapest prices you'll find. My rims were 400 shipped
Don’t worry about what your friends run man. Get something you like. You don’t have to buy billet just to fit in I promise. Cheaper wheels get hate, but also respect from others in the same boat that don’t want to drop all the funds on forged.
I have had everything from CCW/Work/Rays/AMERICAN Force/Enkei all the way to konig, rota, str, ruff racing. All about what you wanna do. Some high quality wheels are ugly. Some lower priced wheels look sick.
The FRS is a great platform to make nice. And don’t take much effort.
We have tons of videos that can help you with that Kong. Check it out here: ruclips.net/video/hvTIdWT-XWE/видео.html&t
Also, just email us and we can help you out at Wheels@fitmentindustries.com
i just got my first set of aftermarket rims for my dodge dart from you guys a couple months ago and i think i nailed it good i hope y'all add my car to the gallery its 2013 doge dart sxt and i went with 18 by 8 touren tr9 offset 40 with some mickey Thompson street comps 245/40/r18 love them
I did days of research for my wheels and it payed off I got almost flush fitment with maybe a few mm poke in the front
Ben W why I said they fit perfect
they don't really poke noticeably but when you look to the side of the car you can see the wheel coming out a little bit but really only a few millimeters. normally in my country it's illegal to have your wheels poking but at the yearly vehicle inspection they didn't even notice it.
About to check out the Fitment Industries site.
Your vids have been thoroughly informative and
didn't make me feel like I was watching grass grow.
Looking forward..
why buy high end tires when only the sidewall is in contact with the ground
soundlesspeal most people want grip and don't run stupid amounts of camber.
Simon G =most people are boring
soundlesspeal getting the power to the ground > playing in the parking lot
Simon G why would you buy expensive tires just to waste it on skids
soundlesspeal expensive? We have different ideas of that. My tires will always run me around $1500 for a set of 4
I dont know if these are good tires but I OEM rims but after market tires. Their called Fuzion touring tires, I dont know if they're good or not though or if I buy wheels for the first time they'll look good on the wheels, the compound I round out are pretty good. Soft but not to soft, they get great grip. I put the wheels on my avenger and they ran really well at higher speeds.
Offset can effect barring wear. Important piece of info that wasn't mentioned 😉✌️
Brody I blew my bearings lol on stock wheels with cheap spacers, don’t buy spacers lol
Thanks to you guys. I got a set of F1R F21'S for my accord sedan and they look and feel great on the car. Thanks fitment crew!
Very useful information! and PLEASE get wheels that are the right bolt pattern for your car haha
That's definitely important. Haha
Hello, in Brazil we prefer concaves wheels, because its better than others!
“Me when I was 16 years old” dang you got me perfectly, I just got my car and wanted to buy some rims to look cool
This whole time watching these past month worth of videos, I thought you guys had more subscribers. These videos are professional. Keep going
Don't tell me what to do
🙃🙃
Edgy
LOL
don’t be told what to do
I plugged in all the numbers from my stock wheels. BAM it fits. Looks good too.
Car guys struggle when buying rims
Others struggle when buying shoes
What if u like cars and shoes?
@@lukesmith115 then you have figure out which is more important n comes first! That being said the car first! Lol shoes arent as important
Let’s keep it real, mos car guys really can’t dress
@@sopretty43vr im sorry wat
And you really struggle when trying to find wheels for a Montana minivan
@Fitment Industries you guys should consider selling breaks that would be dope i love your web site its simple and easy
Working on it! We are working on adding so much new stuff to our site all the time, It just literally takes forever because it is a lot of stuff to put on the site there are tons of details! 😂
@@FitmentIndustries thanks and its understandable just keep on being you. I will be wait I trust you guys. Love the car care items you have.
You spelled the website wrong on the video 4:37 🙄
I have a mustang 2012 and I bought 20×10 AMR and the riding quality been so good and I been having 21 miles MPG BEFORE and now It's 18 MPG yes I love how they looks like but I get made when I see how bad is riding quality being right now, 18 or 19 inches wheels are the best wheel I had experience with in my old 2007 Mustang GT
Bbs ❤️❤️fitment industries.❤️. Still not ready for wheels but I haven’t forgotten where ima get em from ✌️ my boys
🙌🏻
First set of aftermarket rims and tires i bought were BBS SR in machined alloy with matte black accents with Pirelli Corsa System Direzionales on them. 235/35R19
Stuck between getting cheap tires so I can burn them without worrying and buying expensive tires so I can have tire lettering
My OEM integra wheels were 195/60/R14 I bought new wheels and tires with dimensions 195/60/R15 and they fit they like a glove. Only thing that changed was the rim size that’s it. I was playing it safe but now that I think of it I could’ve put 205s on cause 195 is pretty skinny.
wrong. the circumference increased; 195/55/15 would be correct, you could do 205/50/15 and it would also closely match oem circumference. with you current tires, your speedometer is off by over 4%; so when guage reads 60, you are going about 63.
Kuro Murasaki I actually did not know that. I knew it would affect my speed but I didn’t think it would throw my speedometer off. I really wanted to get 55 but I stuck with 60 cause the roads in ohio have lots of potholes and I wanted a little more meat on the tire to absorb the bumps.
Your website is still lacking some car brands tho...
we are working on it!
Impala are a huge market js
Yeah im stuck with needing spacers. For a 300c because my offset is to close to rub but it has room to be pushed out
Shoot us a email at shop@fitmentindustries.com and lets see if we can hook you up!
Risk it for the biscuit 🤔🤔🤔
So I have a 1996 Toyota Tacoma... it’s my little project truck and I was thinking of getting either TE37V’s or old school jdm 3 Spokes
Where do you enter in your make and model to see what fits your car?
Right here! - www.fitmentindustries.com/wheels-tires
245/40r18s wrapped on my Enkei T6S 18x10.5 +15. The stretch is beautiful and fit is tight and rubs a little.
Did you add your car to our gallery?! www.fitmentindustries.com/add
Fitment Industries I will right now!
Luckily, my the wheels I bought fit my car perfectly, even the hub bore was perfect; in hindsight, it makes sense because I bought Nismo wheels for a Nissan, and those wheels were made for my car... You can find those wheels on Fitment industry's YT or simply search on YT "reacting to rare wheels sent by fan": P
Thank you for doing that! :D
I had to redrill and hone the center bore of my first set of wheels but I was somewhat prepared for that
I had to set playback speed to 0.75 to keep up. Slow down dude xD
He was talking that fast!? Lol
@@FitmentIndustries
English/American is not my native language, and that made it a little hard to follow as I couldn't keep up whit all the info.
Apart from that I love this videos
Danm that was informative. You should have made the vid longer imo. We all need to be reminded every once in a while about what really is important newbie or not. One rule that matters as well is size does matter hehehe. Go for a +1 no more than a +2 when going up in overall diameter on your rim size (17in rim up to a 19in) is always safe. Wish I had you guys around in the early 90's when I was buying my first set of shoes for my ride. You guys were on point as always!! Thks guys
Thanks for the support homie!
6:14 Okay imma stop you right there, it is pronounced "kuu-nish" or "kuunick" *depending on whether you're in north germany or south germany*
Really great advice Alex. But I cannot agree with the term, aftermarket tires. You are referring to O.E. tires, not aftermarket tires. Good work and I'll keep watching your videos until I have decided to switch wheels on the E91.
Offset is more importanter than skoool 😂 haha
I'm in a 9th gen accord page and got a relatively good idea of what wheels would fit. I didn't actually have to do that much research. Then again I haven't got my wheels yet either. I only order them yesterday though
Any suggestions of wheel / rim brands for a honda civic? This is my first car aswell as my first time purchasing wheels, im not tryna spend too much money, any brands that wont break the buck?
There are TONS out there brother! What I would recommend is going on out gallery and find what other people have on there Civic's to see what you think looks best! 👍bit.ly/2Ma4oca
Quality video. Videos like these helped me pick the right offset for my wheels.
Thanks for the love! 🖤
The issue for me is nobody has 1961 Ford Falcon and their selection
Very great timing of this video because I was just thinking about buying some wheels for the very first time
Another class vid keep it up
Thank you! :D
Fitment Industries gotta show the support
I always thought thin rims (not talking tire profile) a more wire frame because there is less weight to turn. I also thought thicker tires at the front were better for the front tires and bigger at the back for rear wheels but I don't understand what is better.
Thx for this video, i was honestly about to be that guy who guessed
Great video. However note that some cars will give you issues with changing the tire profile as making the entire wheel smaller or bigger can cause modern cars to freak out and cause issues with ABS and things like that, I’m no expert, just saying as I have been made aware of this issue by another expert when i was looking to buy a set of wheels and tires for my 2007 Mazda miata. good luck everyone
Dam that BMW was filthy! They should be ashamed of themselves 😲
Why is this so true...I will more than likely be in touch with you guys as I'm new and yes! I want to get it right first time lmao...keep up the hard word guys!!!
Ling Long tires #1
What's the kinda of tires do I need for the XXR 521 18×8.5 35 wheels? Please and thank you.
Luckly my stock tires are 225/40 18 PS4S, soooo....im good lmao
Lmao...I just reached out to you guys about my 2 dr Blazer & boom!...you upload this video. I almost feel as if my newbie line of questions prompted this vid. Trying to find wheels is STILL a pain in the a$$. I'm not a big fan of most of the wheels that fit my truck. I guess I'll need some more education to find the exact look I want to achieve. I have a vision of what I want but trying to convey that to the pros is the difficult part. Have you ever seen a Blazer with a V8, possibly custom over fenders & concave, tuner style wheels? I doubt it but you just might. 😉
Aaaaaaanndd I still can't find unique lightweight wheels for a miata... Guess the answer isn' always miata
Ok i get it its been about 15 yrs that i have not put rims on a car i wasnt to put some aftermarket rims on my 2018 ford ecosport ese i like whats on but the look little i think i want something bigger than 17 inch but the model selection doesn't have it.. what know?
Shoot us an email at shop@fitmentindsutries.com and we can help you find something for your ride!
buying used wheels
Yall need to make a video on how to protect your aftermarket wheels. Wheel locks and such
Me; just wanting to have a second set to put my winter tires on: "WTF is going on here."
Got some 245/40 firehawk indy 500’s for my FoST. Only have a couple miles on them but they are so quiet compared to the stock eagle f1s.
Cheap tires cause we gonna drift anyways
what's that yellow/gold wheel with the lip near your right ear? that would look good on an SRT4
Never buy cheap rubbers👨👩👧👧
💀😂
I needs something light in weight and can take some torque. Goes on a 09 Scion tC color black.
You guys really recommended a lug nut kit for my wheels/car and they weren’t even the right lugs when I opened the package lol 45 bucks down the drain
Michael Randall if you got it from them email them. Than they will email you a return label and return your money as well.
Mistakes happen. Im sure theyd be more than happy to correct your problem ASAP
@Mugshot Marley and @IS300 EV are right, we'll definitely get this fixed for you man! Shoot us an email at wheels@fitmentindustries.com and we'll get it fixed stat.
GTI and lug nuts? Or do you mean wheel bolts?
Hi Fitment Industries. Love all of your videos! Very helpful and relaxing to unwind to. I had look at your website to look at wheels for my car but my model is not listed. I have a 2000 Nissan Primera P11 and i'm looking at buying my first set of wheels. Cheers
Hey Ethan, Thank you for the support! Glad to hear you find our videos enjoyable, I was looking and I cannot find wheels either HOWEVER! We can still look for you, Just shoot us an email at shop@fitmentindustries.com and we can help you from there!
i bet u my right kidney he wouldnt give this a heart :)))
__ MOJO__ I'm here for your kidney. You tryna take that out for me? Or are we breaking out the anasthesia
try again
Fitment Industries ooooooooHHHHHHHH SHIIIT
Gottem
HOLY FU.
Over your left shoulder that silver multi spoke. What is it and who makes it.
When you combine Nerds and Cars, they become Fitment Ind.
Fitment Ind** Homie!