what about side wall exhaust ? i am a plumber we did alot of heating in nys . i also have a little restaurant i want to relocate . i have 15ft high kitchen nothing above it but snow . im on a outside wall wide open area . it would be a easy clean straight out just like it was do you think itl pass ? ny is a funny state sometimes not a word sometimes i catch a stickler . ny is not very restaurant friendly at the moment with covid they would just soon see everyone quit . i like your work nice and neat .
All depends on your local code. Here we can if your not close to other property and the fan is ten feet in the air Duct has to have a min one inch slope per ft.
Yes you exhaust fan is pulling air from the drains. Start by balancing your range hood fans, exhaust and MUA. Should stop and lower your AC bill. I'd start with lowering exhaust a bit. Email me and I can call you to go into more detail. specialtymetalworks@gmail.com
SV TICKLEMEFINN Im installing a 8 ft hood . But grease duct is running between combustible wood which is 16.5 “ wide. So I should install a 12”x12” duct with 3M Fire Barrier wrap. Are should I remove the combustible wood and replace it with metal C channel? The duct is only 10ft straight up to roof. Suggestions ? I do appreciate.
Timothy I would cut it all away and replace with wood to support the curb and roof. Pending on the code in your area. In Duval county we have to double wrap the duct. Or 22 GA one inch panels with rock wool. That reduces the clearance to three inches. If you have a heavy cooking load I'd up the duct some,better safe than sorry. Easy to slow down a fan, hard to make exhaust duct larger. Captive Aire makes zero clearance duct a bit pricey. Hope this helps.
If we did ductwork installation in this way we be shot here in Australia , it’s very unprofessional way doing a job and very dangerous, these guys have no idea, Lol wearing sneakers and tracksuits on site work
Why wouldn't you get the lift from inside and do that I don't understand specially if it's new construction I can see if it wasn't new construction but if it's new construction I would have pulled around to the front and roped off a space where you could have got the lift out and boom do that s*** up on the roof seraphine Road in that this s*** take too long
![Noob To Max With DRAGON REWORK In Blox Fruits [FULL MOVIE]](http://i.ytimg.com/vi/LnBMOinoOvA/mqdefault.jpg)
Good video, start to finish. a real man working in crocs.
Yea lol if a welding spark goes down my boot, burn,burn.crocs just kick off,the joy of self employment.
OSHA approved.. Haha
love the chemtrail in the sky good catch
Finnz have you considered a come along? Like 30 bucks and they work great.
Hey woody,normally I'd use a Crane. Sometimes I just say the hell with it and act like I'm young again.
Something Carl has never seen. Work.
helloooooooo,theres a small electric motor now that you can clip right on ladder that plls everything up,,roofers ,,etc use all the time
Yes,just usually call a crane lol
Good stuff guys.
Good morning, Thank you very much Sir..
what about side wall exhaust ? i am a plumber we did alot of heating in nys . i also have a little restaurant i want to relocate . i have 15ft high kitchen nothing above it but snow . im on a outside wall wide open area . it would be a easy clean straight out just like it was do you think itl pass ? ny is a funny state sometimes not a word sometimes i catch a stickler . ny is not very restaurant friendly at the moment with covid they would just soon see everyone quit . i like your work nice and neat .
All depends on your local code. Here we can if your not close to other property and the fan is ten feet in the air
Duct has to have a min one inch slope per ft.
Great stuff!
Where are they located?
How much would an installation like that cost after I buy the hood and fans?
Hoodmart has the short cycle hood which has make up air built-in. Yall put one of those in?
Yes a 20' right now in Fernandina fl
Post up a video man.
8 videos back. They are good Mart hoods. Job is in limbo but par 2 is coming
What is the cheapest way to install these should I buy the parts and then find someone to install it please let me know thanks
Andy the human crane. Come on people and buy Andy a real crane. Hes getting older you know. LOL.
Lol Doug
Every time I put my hood system on I get a bad Sewer smell comes in the building do you know what that could be
Yes you exhaust fan is pulling air from the drains. Start by balancing your range hood fans, exhaust and MUA. Should stop and lower your AC bill. I'd start with lowering exhaust a bit. Email me and I can call you to go into more detail. specialtymetalworks@gmail.com
Hey need a 24 inch hood installed can u do in Indianapolis in
Is this what working for a living looks like? Snarl, take note!
Unfortunately I was never smart enough to not be the guy holding the rope.
@@svticklemefinn1176 Ah, soon the only ropes you'll be handling will be aboard that sailboat of yours.
Yall down south some where's aren't you.
Yes Jacksonville fl
How much does it cost please?
Depends on what you want and the type of building your in. Each job is bid individually. Where is your location?
Are those Croc's steel toed ?? lol
Hell yea custom, paid cash.
@@svticklemefinn1176 Bwahahahahahaha
I think you made this video just to show old "Snarl" how real men work. Take notes "Snarl" . There will be a test one day soon.
Ha, you beat me to the comment, Doug!
What size duct do you guys use?
Timothy it depends on hood size and cooking equipment. Never under 12x12 I think that was 16x16.
SV TICKLEMEFINN
Im installing a 8 ft hood . But grease duct is running between combustible wood which is 16.5 “ wide. So I should install a 12”x12” duct with 3M Fire Barrier wrap. Are should I remove the combustible wood and replace it with metal C channel?
The duct is only 10ft straight up to roof.
Suggestions ? I do appreciate.
Timothy I would cut it all away and replace with wood to support the curb and roof. Pending on the code in your area. In Duval county we have to double wrap the duct. Or 22 GA one inch panels with rock wool. That reduces the clearance to three inches. If you have a heavy cooking load I'd up the duct some,better safe than sorry. Easy to slow down a fan, hard to make exhaust duct larger. Captive Aire makes zero clearance duct a bit pricey. Hope this helps.
How much for 8 ft hood
Y'all hiring?
No but the shop is for sale.
Ok
If we did ductwork installation in this way we be shot here in Australia , it’s very unprofessional way doing a job and very dangerous, these guys have no idea,
Lol wearing sneakers and tracksuits on site work
The Dingo Ate My Baby.
The restaurant owner wanted a bargain. Lowest bidder Im sure.
Carl the bumm says someone streams him do you know who ? i was booted. lol. thanks...........
Wandering droll. Mega fine people over there.
@@svticklemefinn1176 , thanks.......
@@MegaBait1616 Anytime..
Why wouldn't you get the lift from inside and do that I don't understand specially if it's new construction I can see if it wasn't new construction but if it's new construction I would have pulled around to the front and roped off a space where you could have got the lift out and boom do that s*** up on the roof seraphine Road in that this s*** take too long