Patina Blue 1972 Ford F100 EP-1 Getting it home and cleaning it out - HOW BAD COULD IT BE?

Поделиться
HTML-код
  • Опубликовано: 15 июл 2024
  • Patina Blue 1972 Ford F100 EP-1 Getting it home and cleaning it out #f100restoration
    Full of mouse house and droppings, this thing STANK to high heaven! Used a large Whiffer Zapper (www.whifferzapper.com) #whifferzapper knock down the odor enough to stand working on it.
    This bumpside 1972 Ford f100 has quite a bit of rust on the interior.
    Removed the whole interior down to the rusty floorboards. Making a list of parts to buy to get this ready to flip.
    THIS TRUCK IS FOR SALE - Best way to reach me is Instagram follow then send me a message there.
    Amazon Affiliate links to tools and parts used for this project:
    AIM Penetrating Lube - amzn.to/3U3jPW0
    Craftsman Socket Set - amzn.to/3Kcts2c
    1/2 breaker bar - amzn.to/3yujRkZ
    Ratcheting Wrench Set - amzn.to/3WKsfa3
    5 Gallon Shop Vac - amzn.to/3wQW51R
    Craftsman 3/8 impact gun - amzn.to/3WQ56mz
    1/2 impact gun - amzn.to/3yCNgt1
    ** MERCH Site and My own NEW creative Tshirt designs **
    troysgarage.myspreadshop.com/
    Send me stuff:
    Troy's Garage RUclips Channel
    4956 West 6200 South - Box 235
    Salt Lake City, UT 84118
    Check me out in other places:
    Instagram: / troysgarage
    00:00 Introduction
    02:50 Plans for the truck and more details
    05:34 First wash in over 4 years
    07:51 2 days later what's inside???
    09:01 Bench Seat Removal
    15:11 Sill plate removal and initial floor cleaning
    16:54 Seat belt removal
    17:07 Headliner removal - RATS NEST
    20:12 Unload from trailer and push into Troy's Garage
    23:43 Outro and plans for the truck
  • Авто/МотоАвто/Мото

Комментарии • 23

  • @addamsaddams4461
    @addamsaddams4461 Месяц назад +1

    I love these old trucks and I would even love to own this one just the way it is I been looking for one for a long time it brings back memories of me my dad with my old f150 I had and wish I still did can't wait to see more videos and see how she turns out GOD BLESS YOU AND YOUR FAMILY AND FRIENDS

    • @troysgarage
      @troysgarage  Месяц назад

      This truck will be for sale when I’m done with it. Want to ensure it goes somewhere it will be loved! 🙌🏼

    • @addamsaddams4461
      @addamsaddams4461 Месяц назад

      @@troysgarage I know if I have the money it would definitely be loved and taken care of there hard to find and I miss my old f150 and wish I still had it just at the time my wife and me was married for a year then she got sick and I sold my truck to her uncle thinking I could buy it back unfortunately he sold it before I even knew he was going to sale it

    • @troysgarage
      @troysgarage  Месяц назад

      @@addamsaddams4461 ouch!!! Keep the dream alive. You may need to find one that not running and work toward getting it on the road. There’s always a way if you want it bad enough!

    • @addamsaddams4461
      @addamsaddams4461 Месяц назад

      @@troysgarage I will and I have been looking just around my area there hard to find unfortunately and I did find one that needs alot of work it has all the parts to put back on inside the cab and bed and has been sitting in same spot for several years under a tarp that's falling apart but they won't sale it but I am still looking and I know someday I'll will find one even if it needs work I can work on the old 70 models just the newer ones have way too much junk that I causes more of a headache and I really older ones was way easier and cheaper and had what you really needed not a bunch of high tech computer junk

  • @Ferdlover
    @Ferdlover 25 дней назад

    Hey man it’s better shape than that 66’ ya had, good one

  • @madgingercustoms
    @madgingercustoms Месяц назад

    Love it man. Going to be cool!

    • @troysgarage
      @troysgarage  Месяц назад

      Thanks Dave! I’ve got some other cool stuff in the works too. I mean it’s no chassis swap and burn down the barn…. Hahaha

  • @ZeroToAwesome
    @ZeroToAwesome Месяц назад

    My bel air had the same coolant on top of the engine problem. There was too much coolant in the system and the overflow port was clogged with junk. So when pressure built up the coolant was escaping past the hose clamp onto the engine.

    • @troysgarage
      @troysgarage  Месяц назад

      Thanks for the info. I’ll check that out for sure.

  • @MD06Laredo
    @MD06Laredo Месяц назад

    55 degrees is freezing for this Arizona dude! It probably fell through the floorboards.

    • @troysgarage
      @troysgarage  Месяц назад

      Hahaha. It’s a dry cold so it’s not so bad! 😜🤘🏼

  • @jimmydavis6254
    @jimmydavis6254 Месяц назад

    From everything I see on that truck it is a Sport Custom...all of the exterior trim, tailgate panel, and interior door panels ...if not, someone went to an awful lot of trouble to make it look like one.

    • @troysgarage
      @troysgarage  Месяц назад +1

      That’s what I was thinking too. But why would the VIN say otherwise. Kinda odd. But either way this thing is sweet!

  • @Scooter30FTW
    @Scooter30FTW Месяц назад

    I hope you're going to do something with the rotted floorboards.

    • @troysgarage
      @troysgarage  Месяц назад

      Cut out and weld in new. Cab mounts are shot too. Stay tuned. This is gonna be awesome!

  • @TKsGarage405
    @TKsGarage405 Месяц назад

    Nice find it looks to be in way better condition then you made it out to be. If it was me and I planned to resell it I’d paint it. 3m makes an insane gun you will paint like a pro and summit racing single stage is like $100 a gallon. I wish I took better videos when I did mine. We didn’t have a clue and the paint itself turned out amazing

    • @troysgarage
      @troysgarage  Месяц назад +1

      I hear what you are saying, but to make it "right" it would take 100's of hours of body work. There's enough dents and dings that it would look bad to have a shiny paint job without hours and hours of sanding. I'm not willing to do that for a truck I don't plan on keeping. I'll put this level of effort into Midnight Maroon, that's the truck we are keeping in the family.

    • @TKsGarage405
      @TKsGarage405 Месяц назад

      @@troysgarage probably not as bad as you’d think. Mine was one of the worst trucks I’ve ever seen. Just bondo in the small dents, primer and away you go. We made some mistakes on mine for sure mostly tiny dents where the bed curves at the top and that was because poor lighting in my old shop. Still looked good and I made good money on resale after I drove it a bunch

  • @ofstrangerplaces3910
    @ofstrangerplaces3910 Месяц назад

    I recently acquired a 1972 Ford that looks like an exact replica of yours! From the body to the interior to the Sport Custom decal; however, mine says "Ford 250" on the front fender decals, so I'm intrigued as to whether yours says the same (I couldn't quite make out what yours said).
    I'm interested to see the work you do on it. Your engine is in a way better condition than mine is and I've got quite a bit more rust that I'll have to figure out, so I'm very intrigued as to how you're going to fix it up. Thanks for sharing and I'll keep an eye out for future videos on this truck!

    • @troysgarage
      @troysgarage  Месяц назад

      Awesome. More details and work on this has already begun. Behind on editing.

  • @capngloval
    @capngloval Месяц назад

    Actually, RUclips decided not to be so anal, and as long as the music is not being sourced by you but is coming from the environment you are in, they've decided to be not so stupid about it. Thankfully.

    • @troysgarage
      @troysgarage  Месяц назад

      I’m not willing to risk it cuz they can change the rules again anytime. 🤷🏼‍♂️