@@SparkleP8nter hey just saying if you haven't managed to get it to work I had to hard reset with a flash drive and downloaded windows onto it from another computer
When I booted my PC the keyboard LEDs would flash up for about a second and then turn off. All I did was hit f7 in this second...and then it just booted up and they were working fine...weird
Thank you! I just watched a dozen awful, unhelpful videos trying to fix this problem. You explained what you were doing clearly, I copied what you did and it worked like a charm!
Thanks mate, this worked for me straight away! I got this issue after the most recent Windows 10 update. It's mad that this has been an issue since Windows 8. For those with questions: When you start up your PC press/mash F2 or delete to go to your BIOS. They all look a bit different, but then look for USB Configuration and set intel xhci to disabled
Thank you, good sir! I'm now writing this with the "redeemed" Razer keyboard. It was lying in dust for three months, but finally thanks to this tip it is working again. Although ironically I had to re-activate legacy again to maintain it.
Thank you for this. This PC is a new build and I guess the smart auto XHCI was selected by default. The mouse and kb would die just as the PC was about to finish booting. I reinstalled 4 times thinking I had some dodgy software. This has fixed it.
Thank you. Looked for a solution for this all day and finally came across this video. Helped me 100%. xHCI stands for entensible host controller interface if nobody has told you yet.
THANK YOU SO MUCH IT HELPED !! i had the exact same problem HERE ARE MY USB BIOS SETTINGS FOR ASUS X99 ROG STRIX if you need them intel xh = disabled legacy = enabled xhci = disabled ehci= disabled
unreal - i just upgraded my bios i am running an ASUS SABERTOOTH Z87 - to BIOS version 1901 running windows 8.1. After the update I encountered the exact same issue you are having - your solution fixed it. As I understand xHCI mode has something to do with the USB 3.0 controller - not really sure but it kinda sux that it happened in the first place! Anyway thanks for sharing dude!! :D
I am currently have this issues too but I run MSI rather than Asus. The bios menu doesn't show the options I need is there anyway to get around this or boot in safe mode without having access to keyboard and mouse?
I turned off legacy on my pc and then I couldnt even use the usb keyboard in BIOS :/ . had to borrow a PS/2 keyboard and then enable legacy drivers and then it randomly started working...hope they fix this wn 8.1 bug.
DO THIS!!! If you’re computer is new and can’t use your mouse and keyboard when you are trying to install windows for the 1st time then buy one of those shitty old school mouses with the circle plug and it will work.
I'm having the same problem as you after installing windows 8.1. It restarted 2-3 times after updating, and now my mouse isn't working. HOWEVER, it is not a USB mouse. Just the trackpad on my laptop. Keyboard is still working fine. I googled this issue and it is common after installing the update but I can't find a solution. Help!
Holy shit thank you so much.. I have an asks formula and I knew how to get to the bios and I tried for hours playing around with the bios setting and this actually worked.. Thank you so much
Thanks for the video, I'm not running on an asus mb and my mb had legacy usb settings "enabled" so I disabled then reenabled. After saving the bios settings it seems to have fixed it. Wouldn't have thought to look in bios without ur help. Would love to know what causes it though as I've been using windows 8.1 on my machine since it came out.
For people like me who cant use keyboard at all, PRESS AND HOLD THE POWER BUTTON. When pc shuts off, unplug it. Plug it back in quickly and hold the delete key on ur keyboard it should enter bios
To enter Bios it´s for most models different. Some have to press F1, some F2 some F9 some even ctrl + alt + del at the start of windows. On older models (when i went to school) we always had F2 to enter Bios
Dude! I was going freaking crazy trying to fix THIS. My BIOS settings were a bit different, but just disabling the two USB ports with the mouse and keyboard worked like a charm. I don't care what anybody else says this vid was PERFECT!
thank you so much for this tip. I could not use the mouse and keyboard neither in safe-mode or in the windows login screen. this little tweak saved me hours upon hours of talking wit tech support.
OH MY GOD! YOU FUCKING LIFE SAVIOUR!!!!!!! I have been non-stop searching for a solution, and here you are you fucking beast! I love you man, thought I had fucked up my PC, but oh my was I wrong (thankfully). Long live my life saviour!
Agree with JoeEnigma. I was lost. I didn't get any error messages, however, so I didn't know that the keyboard would work at all. After seeing your video, I pressed del during startup and got to BIOS, where the keyboard would work.
Thanks Bud, you are a legend. I just upgraded my five year old ANTEC fusion with an ASUS Z87M 16Gb i5 mini ninja blah blah... flies like the wind very happy. Like you, I went for the Win 8.1 upgrade and used the machine and all seemed fine. Went to do my kids homework with her today and two weird changes; i) the splash screen and password seemed to have switched to the same as another PC I have installed 8.1 on on the same network without any intervention from me ii) mouse and Kbd stopped working as soon as win 8.1 boots, although mse/kbd work perfectly in bios. Tried your trick (Just disabled XHCI) left legacy support enabled and mouse/kbd back again. But issue (i) is still unexplained.... It seems to have grabbed the profile of the remote machine without asking me... very worrying if this was my business PC! Cheers dude. great post. Z
Hello mate, i have a Question. Maybe you can help me. I just got an Presonus Audiobox usb. im running on windows 8.1 my usb mouse and keyboard both work. but when i plug the audiobox in it says windows cant regonize the device. error code 43. on the manufactor webpage under driver release notes it say Some Windows PC USB 3.0 ports not compatible with AudioBox family. So my question is can i do something to get the usb to regonize it?
My mouse periodically stopped working, I finally found this solution, go to: 1) Control panel. 2) Device manager. 3) Universal serial bus controllers. 4) USB Root hub(s). 5) Power management tab. 6) Untick the box 'Allow the computer to turn off this device to save power' do this with all the USB Root hubs.
Man been running 8.1 for 12 mths and now suffered this issue. Thanks Carbootcrazy, worked a treat. PS didn't mind the foreplay, as long as I got the happy ending.
2020 in case u run across this problem with the new update u have to shut off the power supply while loading into windows to access troubleshoot options where your keyboard and mouse should work and u have to uninstall the latest quality update from windows once u got that u should be able to load into windows and use your mouse/keyboard and be able to UPDATE your mouse and keyboard driver to avoid the problem in case u wanna reinstall the windows update afterwards.
i love this video! got this problem with my new windows10 1week after i got it, did hardreset and then same shit happend the day after -_-, this fix worked tjo! thanks!!!!:D
I have an hp windows 8.1 laptop. EVERY input device isn't working. I have usb speakers that can control the the volume, sound comes out fine, but I can't adjust the volume. It is a 64-bit with uefi bios. I can't seem to find the option to disesable xhci mode :/. I AM able to use my laptop keyboard and mousepad.
the original windows of my laptop asus is windows 8. after i did the installing process of windows 8.1 then return again to windows 8. i just notice that my keyboard letters q,e,x and start up bottom not working. i don't know what happen. can you help me? thank you
Omg, GTA V just came out tonight, you can't know how happy I'm now that I found a wait to fix that :'D +1like +1sub +1 what ever man, you are the best :'D
I had the same issue with Windows 10 preview. It didn't work when I was upgrading from windows 7, tried changing all the configurations in UEFI BIOS to no avail. I've made a clean fresh install and it works
Hello! So I have this problem with my hp laptop. Everything turns on fine I can type in my password and login fine... but when I get to my desktop the icons on the bottom bar won't show up and my touchpad mouse AND keyboard stops working. I've tried doing a repair but it said it failed... like I said, when I put in my password my mouse moves and keyboard works fine on the log in screen.... it's just stops working on the desktop. please help me it's been like this for two days now I don't know what to do anymore.
I'm not sure what happened to mine but while I was using my laptop, my mouse stopped working for no reason. The battery had a charge and I removed the USB dongle a few times. I even rebooted my laptop and it didn't fix it. So I closed my laptop and went home to go test out my other mouse for my home PC and now both mice are working.
I am running Windows 10 pro on my computer, without any update and a restart the keyboard and mouse isn't responding on the Windows welcome screen. I tried installing a pendrive to 2.0 ports as well seem to be the same. Can yu help me with this.. Thank you
umm previously i had my keyboard working but after some time the white wire from the bottom of the USB (that we plug in our pc) had come out and i replaced the usb with my old usb mouse which was not working and when i connect it to my PC it says that USB device not recognized . plz help
Built a Pc 1 day ago everything worked fine for a day until the next day. I noticed the pc took a long time to boot once booted my mouse and keyboard dident work until 30sec any fix. My pc mainly takes 32 second to boot.
Can you please tell me how to bipass the password screen? I had an 8.1 windows update that will not allow my keyboard or TouchPad to work, and I can't change the driver until I can get thru the password screen. I do not have a touchscreen so I cannot use an onscreen keyboard
Didn't work for me on my ASUS. The only way I can sign in is to unplug the keyboard and go to the lower left corner and turn on the On-Screen Keyboard. Using that I can somewhat get around.
my computer literally says on the "f2 to enter bios" screen "no keyboard detected" so I can't even get into the GD Bios.... wtf anybody in the comments have anything to add or my experience happen to you? Tried all USB slots. mouse shows charging when plugged into pc, it just doesn't detect that it is a keyboard?
On my laptop my keyboard and mouse doesnt work and when i turn it on it got to advanced setting then after i try restarting it didnt work i turned it of then on it didn't work the num and captial lock doesnt work when i touch it some one help me pleasee.
I don't understand how do you get into advanced mode with keyboard and mouse not working. Please help because I have the same problem my splash screen comes up but no mouse or keyboard working, connotations even type password in. Greatly appreciated anyone.
hey this helped my half way. I had my XHCI Hand-off disabled. my mice and keyboard is working. I also went to settings>advanced>windows OS configurations and set it to enable. so everything seemed to be fine. when I got to installation my external dvd drive stopped working and I don't know why. I'm using MSI Z170a gaming pro with i5-6600K. I need help getting it to work
pls help, don't have usb configuration options and i can't use my keyboard and mouse. I especially need my mouse working to fix my other drivers issues.
![Mouse and Keyboard shut off when Windows Starts but works in BIOS [SOLVED]](http://i.ytimg.com/vi/4SzoGwcNBjo/mqdefault.jpg)
My keyboard and mouse ain't working at the same time
Same
Mine too
did you find a fix
Did u find solution .if yes plez say i had same problem
Well I ended up calling a family's friend, he's a graduate on those kind of stuff and managed to fix it but I don't know "HOW" He fixed it
MY MOUSE AND KEYBORD WONT WORK HOW CAN I DO THAT???
Exactly
@@SparkleP8nter did you figure it out coz i dont know what to do
Levels no not yet, tried using an external mouse, also didn’t work, much
@@SparkleP8nter im gonna reset windows through a usb il let you know if that works if you want
@@SparkleP8nter hey just saying if you haven't managed to get it to work I had to hard reset with a flash drive and downloaded windows onto it from another computer
When I booted my PC the keyboard LEDs would flash up for about a second and then turn off. All I did was hit f7 in this second...and then it just booted up and they were working fine...weird
Yung Pik same it won't work tho
Yung Pik the exact same thing happens to me
I got the Same probleme but IT doesnt Help me :(
@@DuoZock did u find the issue bro im having the same problem
@@mochitovie3748 did u find the issue im having the same problem
Thank you! I just watched a dozen awful, unhelpful videos trying to fix this problem. You explained what you were doing clearly, I copied what you did and it worked like a charm!
Thanks mate, this worked for me straight away! I got this issue after the most recent Windows 10 update. It's mad that this has been an issue since Windows 8.
For those with questions:
When you start up your PC press/mash F2 or delete to go to your BIOS. They all look a bit different, but then look for USB Configuration and set intel xhci to disabled
Thank you so much. 10 years later and still works.😊
Thank you, good sir! I'm now writing this with the "redeemed" Razer keyboard. It was lying in dust for three months, but finally thanks to this tip it is working again. Although ironically I had to re-activate legacy again to maintain it.
I can't see what the BIOS screen settings are, it's blurry. Why don't you post the options that you're changing in your video's description.
Worthless video ha. He lijes tontalk without showing the bios hahah.
Thank you for this. This PC is a new build and I guess the smart auto XHCI was selected by default. The mouse and kb would die just as the PC was about to finish booting. I reinstalled 4 times thinking I had some dodgy software. This has fixed it.
Thank you. Looked for a solution for this all day and finally came across this video. Helped me 100%. xHCI stands for entensible host controller interface if nobody has told you yet.
THANK YOU SO MUCH IT HELPED !! i had the exact same problem
HERE ARE MY USB BIOS SETTINGS FOR ASUS X99 ROG STRIX if you need them
intel xh = disabled
legacy = enabled
xhci = disabled
ehci= disabled
I can't see shit. The text is too damn blurry.
My m&k works in Bios and I activated the settings but it doesn’t work in the Desktop
unreal - i just upgraded my bios i am running an ASUS SABERTOOTH Z87 - to BIOS version 1901 running windows 8.1. After the update I encountered the exact same issue you are having - your solution fixed it. As I understand xHCI mode has something to do with the USB 3.0 controller - not really sure but it kinda sux that it happened in the first place! Anyway thanks for sharing dude!! :D
Thank you!! Now i don't have to buy a new motherboard. You are a real life saver!!!
I can not thank you enough, wish I'd seen your video first before going around the forums for 2 hours
I am currently have this issues too but I run MSI rather than Asus. The bios menu doesn't show the options I need is there anyway to get around this or boot in safe mode without having access to keyboard and mouse?
Me too
Some say to this day this man is still saving computers
I really appreciate this video, it fixed my problem when, in a dual boot, Windows 7 would have this problem, and Windows 10 not. Now both work.
This happened to me after I updated my USB drivers, this fix didn't work. I don't have the Intel xHCI mode available in USB configuration. Please help
Oh my geee! It worked for me! Ive been crying for almost 3 hours with this problem! Im glad that I bumped up with yout video!!! 😭😭😭😭.
Hi can u help me
Turned off legacy in my BIOS and it worked flawless! Thanks :)
I turned off legacy on my pc and then I couldnt even use the usb keyboard in BIOS :/ . had to borrow a PS/2 keyboard and then enable legacy drivers and then it randomly started working...hope they fix this wn 8.1 bug.
I did everything but my keyboard and mouse doesn't work. please help
Somebody give this guy a Nobel for this contribution. Thank you good sir. That fixed my problem
This just happened to me. I have a evga z87 ftw motherboard and your method worked. Thank you so much!
DO THIS!!! If you’re computer is new and can’t use your mouse and keyboard when you are trying to install windows for the 1st time then buy one of those shitty old school mouses with the circle plug and it will work.
I'm having the same problem as you after installing windows 8.1. It restarted 2-3 times after updating, and now my mouse isn't working. HOWEVER, it is not a USB mouse. Just the trackpad on my laptop. Keyboard is still working fine. I googled this issue and it is common after installing the update but I can't find a solution. Help!
Holy shit thank you so much.. I have an asks formula and I knew how to get to the bios and I tried for hours playing around with the bios setting and this actually worked.. Thank you so much
WORKED!! I had no USB at all when windows booted and this fixed it.
Same thing just happened to me on a 5 month old win 8.1 install on a gigabyte m/b, your solution worked, thanks!
Thanks for the video, I'm not running on an asus mb and my mb had legacy usb settings "enabled" so I disabled then reenabled. After saving the bios settings it seems to have fixed it.
Wouldn't have thought to look in bios without ur help.
Would love to know what causes it though as I've been using windows 8.1 on my machine since it came out.
Thanx a lot mate ...after 6 years I got it right
For people like me who cant use keyboard at all, PRESS AND HOLD THE POWER BUTTON. When pc shuts off, unplug it. Plug it back in quickly and hold the delete key on ur keyboard it should enter bios
Thanks
To enter Bios it´s for most models different. Some have to press F1, some F2 some F9 some even ctrl + alt + del at the start of windows. On older models (when i went to school) we always had F2 to enter Bios
thanks alot man, that fixed it for me, was thinking I was gonna have to pay to repair.
unplug the keyboard or PC itself?
VERY much appreciated. All the "tech" sites provided no help.
Dude! I was going freaking crazy trying to fix THIS. My BIOS settings were a bit different, but just disabling the two USB ports with the mouse and keyboard worked like a charm. I don't care what anybody else says this vid was PERFECT!
thank you so much for this tip. I could not use the mouse and keyboard neither in safe-mode or in the windows login screen. this little tweak saved me hours upon hours of talking wit tech support.
OH MY GOD! YOU FUCKING LIFE SAVIOUR!!!!!!! I have been non-stop searching for a solution, and here you are you fucking beast! I love you man, thought I had fucked up my PC, but oh my was I wrong (thankfully). Long live my life saviour!
Agree with JoeEnigma. I was lost. I didn't get any error messages, however, so I didn't know that the keyboard would work at all. After seeing your video, I pressed del during startup and got to BIOS, where the keyboard would work.
This video saved me from going insane. I love you carbootcrazy
Thanks Bud, you are a legend. I just upgraded my five year old ANTEC fusion with an ASUS Z87M 16Gb i5 mini ninja blah blah... flies like the wind very happy. Like you, I went for the Win 8.1 upgrade and used the machine and all seemed fine. Went to do my kids homework with her today and two weird changes; i) the splash screen and password seemed to have switched to the same as another PC I have installed 8.1 on on the same network without any intervention from me ii) mouse and Kbd stopped working as soon as win 8.1 boots, although mse/kbd work perfectly in bios. Tried your trick (Just disabled XHCI) left legacy support enabled and mouse/kbd back again. But issue (i) is still unexplained.... It seems to have grabbed the profile of the remote machine without asking me... very worrying if this was my business PC! Cheers dude. great post.
Z
after resetting my bios, booting in safe mode, to various other thing such as restarting the computer over and over, THIS WORKED!
tytytyty
Hello mate, i have a Question. Maybe you can help me. I just got an Presonus Audiobox usb. im running on windows 8.1 my usb mouse and keyboard both work. but when i plug the audiobox in it says windows cant regonize the device. error code 43. on the manufactor webpage under driver release notes it say Some Windows PC USB 3.0 ports not compatible with AudioBox family. So my question is can i do something to get the usb to regonize it?
My mouse periodically stopped working, I finally found this solution, go to: 1) Control panel. 2) Device manager. 3) Universal serial bus controllers. 4) USB Root hub(s). 5) Power management tab. 6) Untick the box 'Allow the computer to turn off this device to save power' do this with all the USB Root hubs.
thanks i'll try this!
isnt there only one root hub?? how to find them all
They are all together like ticked boxes, I just un-ticked them all. There's been no problems with my mouse since.
Man been running 8.1 for 12 mths and now suffered this issue. Thanks Carbootcrazy, worked a treat. PS didn't mind the foreplay, as long as I got the happy ending.
2020 in case u run across this problem with the new update u have to shut off the power supply while loading into windows to access troubleshoot options where your keyboard and mouse should work and u have to uninstall the latest quality update from windows once u got that u should be able to load into windows and use your mouse/keyboard and be able to UPDATE your mouse and keyboard driver to avoid the problem in case u wanna reinstall the windows update afterwards.
Thank you so much. This helped me fix the issue of my mouse and keyboard not working on my Windows 7 install screen.
i love this video! got this problem with my new windows10 1week after i got it, did hardreset and then same shit happend the day after -_-, this fix worked tjo! thanks!!!!:D
my pc appears ps/2 simulator.should i enable it or disable it?
My keyboard and mouse won't work even tho they are plugged in and it's saying "No keyboard detected"
you my dear sir are a lifesaver, i was pretty frustrated until i found your workaround, thank you so much. :)
How do you enter that new looking BIOS? I haven't he old one and can't find a way of getting that shiny one.
I have an hp windows 8.1 laptop. EVERY input device isn't working. I have usb speakers that can control the the volume, sound comes out fine, but I can't adjust the volume. It is a 64-bit with uefi bios. I can't seem to find the option to disesable xhci mode :/. I AM able to use my laptop keyboard and mousepad.
the original windows of my laptop asus is windows 8. after i did the installing process of windows 8.1 then return again to windows 8. i just notice that my keyboard letters q,e,x and start up bottom not working. i don't know what happen. can you help me? thank you
Don't have the options shown in the video in my bios
Umm if I’m gonna buy a new keyboard and mouse will it work?
Is there any way to do this if you are using legacy instead UEFI Bios?
Do i plug in my keyboard first and then do it? Or Keep it unpluged then do it then plug it back??
Omg, GTA V just came out tonight, you can't know how happy I'm now that I found a wait to fix that :'D +1like +1sub +1 what ever man, you are the best :'D
Thank you so much. Can't describe how much this helped!
I had the same issue with Windows 10 preview. It didn't work when I was upgrading from windows 7, tried changing all the configurations in UEFI BIOS to no avail. I've made a clean fresh install and it works
I have a gaming mouse and it legit just doesnt turn on
Hello! So I have this problem with my hp laptop. Everything turns on fine I can type in my password and login fine... but when I get to my desktop the icons on the bottom bar won't show up and my touchpad mouse AND keyboard stops working. I've tried doing a repair but it said it failed... like I said, when I put in my password my mouse moves and keyboard works fine on the log in screen.... it's just stops working on the desktop. please help me it's been like this for two days now I don't know what to do anymore.
I'm not sure what happened to mine but while I was using my laptop, my mouse stopped working for no reason. The battery had a charge and I removed the USB dongle a few times. I even rebooted my laptop and it didn't fix it. So I closed my laptop and went home to go test out my other mouse for my home PC and now both mice are working.
OMG THX VERY MUCH !! I called asus, they didnt know how to solve it neither does microsoft. I WANT TO MARRY YOU !!!!!! TYYYY
...
Oookay?
I disabled the XHCI hand-off and still doesn't work, I can't find the intel xhci option that you have in your video
I am running Windows 10 pro on my computer, without any update and a restart the keyboard and mouse isn't responding on the Windows welcome screen. I tried installing a pendrive to 2.0 ports as well seem to be the same. Can yu help me with this..
Thank you
Great troubleshooting. I had the same issue you described...video helped me fix it in 5 minutes. Much appreciated!
umm previously i had my keyboard working but after some time the white wire from the bottom of the USB (that we plug in our pc) had come out and i replaced the usb with my old usb mouse which was not working and when i connect it to my PC it says that USB device not recognized . plz help
how to go to automatic repair ? i use acer pc , can you help me ?
i have one problem ,i try installing windows 7 and freeze mouse and keyboard ,i can not .i have msi motherboord ..
Dont work for me 2022 still cant use mouse and keyboard only in bios
How did he get into that bios advanced mode?
Built a Pc 1 day ago everything worked fine for a day until the next day. I noticed the pc took a long time to boot once booted my mouse and keyboard dident work until 30sec any fix. My pc mainly takes 32 second to boot.
i have an EMS-800 but the led is flashing and i thought this would fix it has this happend to you because i would really like a tutorial to fix it
Thanx for this tutorial, it helped me to fix a problem with friend's computer!
now how am i supposed to enter bios mode without a keyboard
I have a z87 plus motherboard and this worked perfectly, thanks!
Can you please tell me how to bipass the password screen? I had an 8.1 windows update that will not allow my keyboard or TouchPad to work, and I can't change the driver until I can get thru the password screen. I do not have a touchscreen so I cannot use an onscreen keyboard
Didn't work for me on my ASUS. The only way I can sign in is to unplug the keyboard and go to the lower left corner and turn on the On-Screen Keyboard. Using that I can somewhat get around.
theres no xhci in my lap..only ahci and compatibility..when you boot in compatibility blue screen comes and restarts what to do?
How do you get into bios from screen if the keyboard doesn't work?
my computer literally says on the "f2 to enter bios" screen "no keyboard detected" so I can't even get into the GD Bios.... wtf
anybody in the comments have anything to add or my experience happen to you?
Tried all USB slots. mouse shows charging when plugged into pc, it just doesn't detect that it is a keyboard?
Thank you. I was looking everywhere to find a solution for this. However, I can't seem to find xhci (I think that's what it's called) in my bios.
You articulate as blurry as your screen!
If I don’t have a mouse to click on anything how am I supposed to do anything?!! Sorry really frustrated
What tf if mouse and keyboard is not working during log in how should I enter to that menu
Thanks man I have literally looked for the past 3 hours for this!
On my laptop my keyboard and mouse doesnt work and when i turn it on it got to advanced setting then after i try restarting it didnt work i turned it of then on it didn't work the num and captial lock doesnt work when i touch it some one help me pleasee.
Did you fix it ?
if my keyboard isn’t working and it’s clearly on the title how am i supposed to use it
Did you figure it out
@@Resilience16 can some1 help me keyboard mouse. Only work in bios i hard reset evrything but still only in bios 2022 hellp
@@Lowkey6did u figure it out ????!!!
Thanks a million, this video helped me fix my Dads laptop mouse. I was so stuck until I tried this.
I don't understand how do you get into advanced mode with keyboard and mouse not working. Please help because I have the same problem my splash screen comes up but no mouse or keyboard working, connotations even type password in. Greatly appreciated anyone.
me too!
hey this helped my half way. I had my XHCI Hand-off disabled. my mice and keyboard is working. I also went to settings>advanced>windows OS configurations and set it to enable. so everything seemed to be fine. when I got to installation my external dvd drive stopped working and I don't know why. I'm using MSI Z170a gaming pro with i5-6600K. I need help getting it to work
HOLY CRAP THANK YOU SIR THIS HAS BEEN GOING ON FOR ABOUT A MONTH NOW WAAH
mine works. im using a laptop, but every 10 seconds my usb mouse cuts off and comes back on after a second or two.
Thanks so so so much!! This made it work after 6 hours trying
dude talk too much, just go to the point
You're a savior, worked just fine
How do I do this on a gigabyte motherboard?
You can get to most bios with F2
How did you get it to work?
Your the same as me, I have a gigabyte motherboard, got into bios, but no usb settings thing.
pls help, don't have usb configuration options and i can't use my keyboard and mouse. I especially need my mouse working to fix my other drivers issues.
omG me too im stuck in the start and i cant do nothing
.
Lel my nostalgia comment re-bring me back because of a person who comment with a ''.'' :P
Stupid function. Thank you for your help.