So if you are going to be moving this trailer to a permanent Location on a piece of property that you own to reinforce those kickouts for the front and back extensions, you're absolute method to do that is to build walls on the sides and the front or outer facing. Wall and make them giant storage cabinets! In other words, you're going to build storage compartments that go up underneath to support those! Because with a pop-up pamper like that, you are at lack of storage space! So instead of using just 4 / 4 to support it, build a compartmeant that you can permanently place underneath there and if you ever have to move this camper. Well then , you can slide them out and you can move them into another location where the camper will be at! They also have fiberglass paint, which is used specifically for boats! When you make whatever it is that you're going to support those extenders with even deciding that you have on the outside. Because this is the first video that I'm actually watching. And I am now a new subscriber. You can place that on the exterior and you don't ever have to worry about penetration from water and weather! The other thing you could do is create more space because if you are going to move this camper, what you can do is on the left side as you walk in, you can actually put a kick out beyond the back of that camper, so you can actually lay flat. Instead of instead of making space on the inside of what's already existing.
This is the only Pop-up conversion that retains the actual space that the canvas sections provided , , ,kudos to you man , , im certain you will find a way to reinforce the exterior sections in a clever way , , , heck after while people could pay you to convert their pop-ups 👍🎃👍👍
I guess you've discovered that the tires cannot support the weight. I made the same mistake. Second time I did this I used leuwan and painted with flex seal. ½partical board? Too heavy!
Mistake you made is that you didn't extend the bottom of bed first. You could have put a plywood underneath the original plywood that overlaps much as it needed to expand the size of the bed. Than start building onto the new plywood instead of the old base. This way you could fit into that bed because you made it longer than it was originally or kept the same length. All that material that you put in takes up many inches making the whole bed area much smaller than originally was if you don't expend the bottom 1st and build inward.
Just finished converting my 2001 Jayco and all i can say when i see your project is one word: Weight? I used essentially no plywood or any sheets of wood for siding on my project and the whole trailer is pretty heavy even without the slide-outs. Without cabinets or other fancy interior features (have not got around to doing that). Also wind resistance is huge - a towing nightmare. I'm really curious to see how you'll make out and if there will be no leaks with the moving parts... and towing will be challenge, just a heads up.. i actually blew the head gasket on my 3.5L V6 towing mine for the first time, after about 25 miles. And yours looks way heavier...
R.I.P wheel bearings.... tires, springs, brakes, tongue, frame. These lightweight trailers arent designed to handle all that additional weight youve added- they can barely handle what they are. You always see them on the sides of the highways jacked up with blown out tires and hubs. 😂 Another youtube genius will find out soon enough.
It's a mock up built at home where all my tools and power are, then disassembled and put back together on location. Didn't want to drive 2 hours to the closest store for a screw or 2x4's.
![Felix "Unfair" | [Stray Kids : SKZ-PLAYER]](http://i.ytimg.com/vi/Oswujxm2Ag0/mqdefault.jpg)
So if you are going to be moving this trailer to a permanent Location on a piece of property that you own to reinforce those kickouts for the front and back extensions, you're absolute method to do that is to build walls on the sides and the front or outer facing. Wall and make them giant storage cabinets! In other words, you're going to build storage compartments that go up underneath to support those! Because with a pop-up pamper like that, you are at lack of storage space! So instead of using just 4 / 4 to support it, build a compartmeant that you can permanently place underneath there and if you ever have to move this camper. Well then , you can slide them out and you can move them into another location where the camper will be at!
They also have fiberglass paint, which is used specifically for boats! When you make whatever it is that you're going to support those extenders with even deciding that you have on the outside. Because this is the first video that I'm actually watching. And I am now a new subscriber. You can place that on the exterior and you don't ever have to worry about penetration from water and weather!
The other thing you could do is create more space because if you are going to move this camper, what you can do is on the left side as you walk in, you can actually put a kick out beyond the back of that camper, so you can actually lay flat.
Instead of instead of making space on the inside of what's already existing.
This is the only Pop-up conversion that retains the actual space that the canvas sections provided , , ,kudos to you man , , im certain you will find a way to reinforce the exterior sections in a clever way , , , heck after while people could pay you to convert their pop-ups 👍🎃👍👍
If you gusset those outriggers with triangular 2x4 frames , maybe 4 or 6 of them , it will be solid as a rock.
Man this is awesome. I've been wanting to do something like this for my 88 Coleman pop up. Nice job brother 👍
Flip down post with scissor jacks .
Very nice. I just started this same project with a 1975 Apache mesa
Dude this is cool!
Great build!
Thanks!
looks great!
Run some steal cable from the top of the RV out to the bottom corner
Love it!!❤
Fantastic job!
If you ever do another one. Use foam board.
should have used plastic sheets on outside and 8th inch ply on inside foam in between super light could have closed the ends in and out
Do the ends {beds} slide in and out?
I guess you've discovered that the tires cannot support the weight. I made the same mistake. Second time I did this I used leuwan and painted with flex seal. ½partical board? Too heavy!
I also cut the 2x4's in half.
I changed out the axles and tires. Had to make a custom axle for the additional weight.
Sad you aren't able to make it mobile
Mistake you made is that you didn't extend the bottom of bed first. You could have put a plywood underneath the original plywood that overlaps much as it needed to expand the size of the bed. Than start building onto the new plywood instead of the old base. This way you could fit into that bed because you made it longer than it was originally or kept the same length. All that material that you put in takes up many inches making the whole bed area much smaller than originally was if you don't expend the bottom 1st and build inward.
👏🏽
Just finished converting my 2001 Jayco and all i can say when i see your project is one word: Weight?
I used essentially no plywood or any sheets of wood for siding on my project and the whole trailer is pretty heavy even without the slide-outs. Without cabinets or other fancy interior features (have not got around to doing that). Also wind resistance is huge - a towing nightmare. I'm really curious to see how you'll make out and if there will be no leaks with the moving parts... and towing will be challenge, just a heads up.. i actually blew the head gasket on my 3.5L V6 towing mine for the first time, after about 25 miles. And yours looks way heavier...
Thanks for commenting, but I guess you missed the whole part on future plans?
@hanszimmer8712 and how much did yours end up weighing?
How will you move it?
Disassemble and then reassemble when at location. It will basically be a tiny home, too heavy now so change of plans.
R.I.P wheel bearings.... tires, springs, brakes, tongue, frame. These lightweight trailers arent designed to handle all that additional weight youve added- they can barely handle what they are. You always see them on the sides of the highways jacked up with blown out tires and hubs. 😂
Another youtube genius will find out soon enough.
Somebody didn't read the description or watch the video....
He should have built it at his camp so it didn't have to be moved.
It's a mock up built at home where all my tools and power are, then disassembled and put back together on location. Didn't want to drive 2 hours to the closest store for a screw or 2x4's.