Nice vid!!! Both our team with some butt kickings yesterday with the chiefs luck finally over for now it’s safe to say yall are the best team in the league! We killed the falcons hopefully we can just keep it going!
Thanks for the video. With all the safety concerns of Methylene Chloride seems like you should have stressed how to safely use it. A lot of people watch your great videos, so please do your best to help keep them safe. How about other glueing options. What have you tried in the past and which more safer options can you recommend? Thanks.
That is correct... but I wanted to print both parts at the same time so the project was faster. If I really want a 2 color print I will use my P1S with AMS. ruclips.net/video/Pk1MjmfLqZ8/видео.html
G'day Mike 🙋🇦🇺, today I purchased 3 A1 mini Bambu printers... I have been watching many tutorials on tinkercad and 3D printing, but there's so much to take in... I understand the details and locking styles.. I'm not confident using the computer, so I'm trying to find someone to help me... have you any suggestions, I'd like to collaborate, share, and work with you, I have a limited budget, but I'm absolutely confident you can do it in a few hours ❤.. please advise me 🙏
That is awesome. You snagged three printers. I only create videos and share them. If you have a topic you’re interested in I can try and find one of my videos that fits it.
@HLModTech Thank you, Mike, your very kind 😇... I need to look into the shapes more on jigsaw puzzle edges? I'll keep watching tutorials until I work it out 🤦❤️
I love 3D Gloop and use it from time to time but you need to at least wear a respirator with organic vapor cartridges when using 3D Gloop (a full-face supplied-air respirator is indicated) and don’t use it inside your house/apartment/yurt/living area. Methylene chloride is highly toxic, super nasty stuff. It is not a glue, it is a solvent. Earlier this year the EPA issued a final risk management rule that “Prohibits manufacturing, processing and distribution of methylene chloride for all consumer uses…Most prohibited uses will be fully phased out within 2 years.” Please be safe!
Very cool!! 🎉
My pleasure @StarLabs3D, Thank you for the note! 👍💯
LOVE THIS I am printing a tank for my son and this would be great to bond the pieces together. Thanks!
The bond is awesome! Do check the warnings. A respirator is recommended. I am using it for another project today. 💯👍
Awesome 😎
Always appreciated @Rollinsly29. Have a great weekend!
Nice vid!!! Both our team with some butt kickings yesterday with the chiefs luck finally over for now it’s safe to say yall are the best team in the league! We killed the falcons hopefully we can just keep it going!
Thanks! Crazy beat downs yesterday. Just heard the Jags fired their coach too.
Oh shoot who did they fire? I thought Doug pederson was the coach still. If they fired him man they are just going into rebuild form for sure
lol... I got tricked by an Adam Shef1er tweet. 🤦♂️🤦♂️🤦♂️
@@HLModTech 😂
Thanks for the video. With all the safety concerns of Methylene Chloride seems like you should have stressed how to safely use it. A lot of people watch your great videos, so please do your best to help keep them safe.
How about other glueing options. What have you tried in the past and which more safer options can you recommend? Thanks.
Great point. I will do more research. I have used Gorilla Clear Grip, but I have had parts where users could still tear it apart.
صديقي لاتحتاج الى ألصاق هذه الطبعة فقط تحتاج الى اعداد كيورا توقف الطباعة عند حد الفاصل وتغير خيط الطباعة لنوع اولون اخر وستكون رائعة
That is correct... but I wanted to print both parts at the same time so the project was faster. If I really want a 2 color print I will use my P1S with AMS. ruclips.net/video/Pk1MjmfLqZ8/видео.html
@ نعم في بمبولاب اما في طابعات الون واحد يعتمد على ايقاف طبقة تغير الون وتبديل الخيط الى لون اخر ويتم الاستكمال شكرا لك صديقي
G'day Mike 🙋🇦🇺, today I purchased 3 A1 mini Bambu printers... I have been watching many tutorials on tinkercad and 3D printing, but there's so much to take in... I understand the details and locking styles.. I'm not confident using the computer, so I'm trying to find someone to help me... have you any suggestions, I'd like to collaborate, share, and work with you, I have a limited budget, but I'm absolutely confident you can do it in a few hours ❤.. please advise me 🙏
That is awesome. You snagged three printers. I only create videos and share them. If you have a topic you’re interested in I can try and find one of my videos that fits it.
@HLModTech thanks 😊..I would like to know how to make a gap between the pieces 🤔😁
So I would set the nudge to .1 and nudge them apart. Each click increases the gap by .1 mm.
@HLModTech Thank you, Mike, your very kind 😇... I need to look into the shapes more on jigsaw puzzle edges? I'll keep watching tutorials until I work it out 🤦❤️
I love 3D Gloop and use it from time to time but you need to at least wear a respirator with organic vapor cartridges when using 3D Gloop (a full-face supplied-air respirator is indicated) and don’t use it inside your house/apartment/yurt/living area. Methylene chloride is highly toxic, super nasty stuff. It is not a glue, it is a solvent.
Earlier this year the EPA issued a final risk management rule that “Prohibits manufacturing, processing and distribution of methylene chloride for all consumer uses…Most prohibited uses will be fully phased out within 2 years.”
Please be safe!
Great tips! As always, greatly appreciate you dropping by. 💯🔥
I just use chloroform.
Interesting. I’ll look into that.