I just got one here in the states. I see from their website this model is not listed in the current offerings but can't have been discontinued too long ago. The printed documentation with mine including the box is in English. Hopefully, it works for what I mainly got it for, looking at circuit boards. I have used very expensive FLIR cameras in the past with much better resolution at my work but for my home use, not going to spend that much!
They are still readily available on Aliexpress by the looks, UNI-T are sneeky with the model numbers and offer the same thing but with different numbers.
@@radovansekulovic7746 I have looked at circuit boards and it seems adequate. You will not get high details for picking out like a 0201 sized tiny resistor individually if its in a group of similar temperature parts but you can see things like separated 2x2mm or larger parts or hot-spots OK. Perfectly OK for troubleshooting things or getting overall temperatures of even pretty small areas on the board.
Hi, thank you so much for reviewing this UTI120S. Do you think its enough for starting electrician tool for thermal camera? UTI260 costs twice the price, cant afford fluke/flir.
I'd say yes obviously the more you pay the better but this really does work. I've found hot components on circuit boards with it and found out why my GPU on. PC kept cutting out. Was due too a bad connection. You can also get a lens for them for closer work.
Hi thank you very much for your information. I will mostly use on electrical panel and engine. May i ask one more question on is there ideal distance for the measurement?
hola, yo igual me compré una hace pocos días en ALIEXPRESS..... compré el combo que viene con lente macro y estuche para guardar todo por +/- 154$..... para mí es muy buen equipo por el precio que tiene. yo le eliminé esa paleta de colores de la derecha por qué ocupa mucho espacio y no aporta nada en la medición, solo le dejé temperatura máxima y mínima con punto central y ya....y se ve mejor. igual le dejé la fecha para que en la foto de captura salga. ya la he probado en la empresa y es excelente la imágen. estoy muy satisfecho con este equipo. también lo venden en marca MILESEEY y la UNIT lo vende en el mundo con varios números diferentes, aún no se el porqué....
@@plasmaDave si, mas que todo para ver de cerca tarjetas electrónicas y ver dónde esta el área caliente o en corto.... o para ver objetivos más pequeños. se usa de vez en cuando este lente o si eres técnico de celulares o reparador de tarjetas electrónicas lo usarás todo el tiempo 👍
Nice video as I have ordered one myself so thank you......just wondered though why ppl still use one handed camera work when there are so so so many tripods or selfie sticks out there to give two handed operation of wot is being videoed and presented......sorry I just don't understand why ppl still do this 😮
Hi does this have a laser pointer? I have the uti 120s andnin the menu it has an option to turn the laser on and off but when i turn on there is no laser pointer thNkz
I will do a follow-up video when I find the time but yes I think it's pretty good at what it does it has already identified some hot connections on my CNC machines and that's primarily why I bought it.
![BLACK BAG - Official Trailer [HD] - Only in Theaters March 14](http://i.ytimg.com/vi/Du0Xp8WX_7I/mqdefault.jpg)
Pretty impressive little tool really.
Does make it easier to see than a digital thermometer for sure.
I just got one here in the states. I see from their website this model is not listed in the current offerings but can't have been discontinued too long ago. The printed documentation with mine including the box is in English.
Hopefully, it works for what I mainly got it for, looking at circuit boards. I have used very expensive FLIR cameras in the past with much better resolution at my work but for my home use, not going to spend that much!
They are still readily available on Aliexpress by the looks, UNI-T are sneeky with the model numbers and offer the same thing but with different numbers.
Is it enough to look at circuit boards what are your thoughts?
@@radovansekulovic7746 it's marginal, you can and I have used it for that a fair few time now. I'm told the magnifying lens helps.
@@radovansekulovic7746 I have looked at circuit boards and it seems adequate. You will not get high details for picking out like a 0201 sized tiny resistor individually if its in a group of similar temperature parts but you can see things like separated 2x2mm or larger parts or hot-spots OK.
Perfectly OK for troubleshooting things or getting overall temperatures of even pretty small areas on the board.
Thank you very much for the replies.
Hey is this good for pipe leak detection behind walls and tiles?
@@mattvideo1994 maybe but only if the water was colder or warmer than the wall. Not ideal I think.
Great presentation. Thank you for your time and effort to make this video and share it with us. Greetings from Croatia.
Your welcome 😊
Thanks for showing how to change from Chinese to English, They have an updated model of this but the price is like AUD 400.. so I got the older model.
most of them in this price range are like 32x32 and 9hz, this is better at 120x90 and 25hz.. seems decent
I'm still happy with it, I think the trick is not to try a better and more expensive one then you don't know what your missing 😉
is this good for detecting short on laptop motherboarad?..maybe for small caps/resistor or ic
The standard magnification is going to make that hard to be accurate, there is an add on lens that makes that easier apparently.
Hi, thank you so much for reviewing this UTI120S. Do you think its enough for starting electrician tool for thermal camera? UTI260 costs twice the price, cant afford fluke/flir.
I'd say yes obviously the more you pay the better but this really does work. I've found hot components on circuit boards with it and found out why my GPU on. PC kept cutting out. Was due too a bad connection. You can also get a lens for them for closer work.
Hi thank you very much for your information. I will mostly use on electrical panel and engine. May i ask one more question on is there ideal distance for the measurement?
@@JustaCuriousity you would need to check the manufacturers specifications for that I think
Alright, thank you so much
Only in Australia they are trying to keep the heat out.
Yeah February the 1st 98% humidity 32 deg C 🥵
hola, yo igual me compré una hace pocos días en ALIEXPRESS..... compré el combo que viene con lente macro y estuche para guardar todo por +/- 154$..... para mí es muy buen equipo por el precio que tiene. yo le eliminé esa paleta de colores de la derecha por qué ocupa mucho espacio y no aporta nada en la medición, solo le dejé temperatura máxima y mínima con punto central y ya....y se ve mejor. igual le dejé la fecha para que en la foto de captura salga. ya la he probado en la empresa y es excelente la imágen. estoy muy satisfecho con este equipo. también lo venden en marca MILESEEY y la UNIT lo vende en el mundo con varios números diferentes, aún no se el porqué....
Yes it appears to be a good unit for the price, I also have taken away the colour guide on the right-hand side. Is the Macro lens any good?
@@plasmaDave si, mas que todo para ver de cerca tarjetas electrónicas y ver dónde esta el área caliente o en corto.... o para ver objetivos más pequeños. se usa de vez en cuando este lente o si eres técnico de celulares o reparador de tarjetas electrónicas lo usarás todo el tiempo 👍
Nice video as I have ordered one myself so thank you......just wondered though why ppl still use one handed camera work when there are so so so many tripods or selfie sticks out there to give two handed operation of wot is being videoed and presented......sorry I just don't understand why ppl still do this 😮
It's a fair question, simple answer is when I made this video I didn't have a mount for my phone. It was on order 😊
Hi does this have a laser pointer? I have the uti 120s andnin the menu it has an option to turn the laser on and off but when i turn on there is no laser pointer thNkz
Yes mine has a laser pointer, can't say I use it though
@@plasmaDave got it, I have to hold the trigger for the laser to come on
Hi, are you still happy with it. Especially in regards to finding where heat is entering or leaving the house? 👍🇦🇺
Yes I'm happy with it and it is a little cheaper now I see. It is a budget solution though and you can pay more for more features and resolution etc
Please it's rechargeable?
Yes it is rechargable.
VERY nice
Is it any good
I will do a follow-up video when I find the time but yes I think it's pretty good at what it does it has already identified some hot connections on my CNC machines and that's primarily why I bought it.
Just like the film predator.