Why Are Circuits on Boards?

Поделиться
HTML-код
  • Опубликовано: 29 янв 2025

Комментарии • 1,5 тыс.

  • @johnpomaro1731
    @johnpomaro1731 4 года назад +182

    That must be one of the best, extensive, and complete explanations of circuit boards that I imagine anyone has ever put together. I really like how you covered their predecessors, and went on to the considerations of further integration.
    Good job!

  • @BeauxGnar
    @BeauxGnar 2 года назад +31

    When I was going through ATT (Advance Technical Training) in US Navy Submarine School in 2012 we learned to troubleshoot component failures on old PCBs that had the hand painted traces on there. They had mountains of those old PCBs and I couldn't get over how cool it was that someone had painstakingly done the traces by hand over the course of probably several hours and here they were many decades later still /mostly/ functional.

  • @captainmorgan9066
    @captainmorgan9066 4 года назад +66

    When RUclips first recommended this video I thought "What a dumb video, they are on circuit boards becuase how else can it be?!".
    When RUclips recommended me this video for the fifth time I clicked and watched it.
    My first thought was wrong, it's an interesting and entertaining video with a fair bit of history.
    Now I am subscribed.

    • @patriciaverso
      @patriciaverso 3 года назад +3

      These are the best videos in my opinion. Those that get our certainties and smacks us in the face with them.
      I find this happens a lot with this channel.

  • @dkhosh7380
    @dkhosh7380 3 года назад +1

    1:00 man your references are always on point

  • @Alan_AB
    @Alan_AB 2 года назад +38

    Wow. I have been an electronics hobbyist since the early 1970's. I qualified in 1980. I'm so old that I have even worked on a real breadboard. (Not the pllastic kind with holes in it).
    This is the best video I have ever seen regarding the history of the printed circuit board. I believe that every single electronics student should be made to view this video when starting out on their career. Brilliant, Zack. Thank you so much.

  • @ronhobyak9902
    @ronhobyak9902 2 года назад +1

    Man I now need a drink ! ... How many times can you divide 1 into 2 parts ???
    Amazed and terrified at the same time.

  • @Robotnic25
    @Robotnic25 4 года назад +1804

    "Anybody with a screwdriver can replace a broken camera"
    Apple: "ya, lets see about that"
    #RightToRepair

    • @DoctorThe113
      @DoctorThe113 4 года назад +4

      🤣🤣

    • @monad_tcp
      @monad_tcp 4 года назад +107

      He say that this is for "consumers", Apple users aren't consumers, they are accolades of a sect. just pay and stay shut

    • @Kenionatus
      @Kenionatus 4 года назад +32

      Get y'all a Fairphone. Screwdriver included.

    • @KnightoftheSorryFace
      @KnightoftheSorryFace 4 года назад +5

      If you wanna replace it you'll have to pay another 1k

    • @lawnmowerdude
      @lawnmowerdude 4 года назад +8

      You do know you can do that right? Apparently none of you have been inside an iPhone before lol.

  • @dominicklittle9828
    @dominicklittle9828 4 года назад +1

    fixing and building fpv racin drones hot me into soldering a few years ago, love it. this video filled in a ton of blanks for me thank you

  • @88Xlmk
    @88Xlmk 4 года назад +74

    Zack: Why Are Circuits on Boards?
    Me: Where else would programs drive their lightbikes?

  • @playaspec
    @playaspec 4 года назад +9

    I'm eyebrow deep in this very world and am *SO* grateful you're out here making electronics easily digestible. It really is endlessly amazing the dizzying number of things you can make with just a little understanding. I hope those just learning the basics keep pushing forward with mastering what in any other time would be considered magic.

  • @strangewasya
    @strangewasya 4 года назад +177

    >secret government espionage chips
    >security chips to protect you from secret government espionage chips
    these are the same thing

    • @revimfadli4666
      @revimfadli4666 4 года назад +21

      The trick is which government is mentioned at which moment

    • @jean-clauded5823
      @jean-clauded5823 4 года назад +10

      No, they are not the same thing.
      Government requires a phone that has secret chip #1. Cell phone maker adds secret chip #2 to give false information to secret chip #1.

    • @voidofspaceandtime4684
      @voidofspaceandtime4684 4 года назад +21

      @@jean-clauded5823 optimistic.

    • @hydraulicsystems332
      @hydraulicsystems332 4 года назад +7

      @@jean-clauded5823 Yeah, that's not how things work, the TMPs all have backdoors and the baseband radio processor is completely hinges off wide open access, the baseband processor also has complete access to all the ram.

    • @pellesomethingsomething
      @pellesomethingsomething 4 года назад +2

      @@jean-clauded5823 So we're essentially talking hardwired politics now? William Gibson was on to something ....

  • @utah133
    @utah133 4 года назад +1

    I was an old school TV repairman. Zenith, a major US TV maker bragged that their chassis was "hand-wired" way late into the solid state era. Eventually they began using small boards that plugged onto the "hand-wired" stuff. And socketed ICs and transistors!

  • @marthinwurer
    @marthinwurer 4 года назад +138

    "Zap themselves into the shadow realm"
    I love that you state call to action before you say to subscribe.
    I can't wait for the Pick and Place machine video!
    "Will we ever be able to smash mosquitos with reddit?"
    Very good overview of circuit boards! I'm gonna have to learn how to make them with something like KiCad.

    • @ZackFreedman
      @ZackFreedman  4 года назад +31

      Thank you very much! I'll do a PCB design video eventually; I'm still figuring out a good format for tutorials. Yes, I felt obligated to call attention to my call to action, both for humor and for personal integrity.

  • @robinclark5945
    @robinclark5945 3 года назад

    I’ve never liked so many RUclips videos. This channel gives me hope. I don’t know how or why. Thank you for being you.

  • @TheRealEquinox
    @TheRealEquinox 4 года назад +4

    The writing and performance in this video are actually really well done. Nice job.

  • @Violator420
    @Violator420 4 года назад

    This video does a good job of explaining this, whether you are a college student or has been in the industry for a bit. BGA, Vias, failure mode involving delamination, multilayer boards, future of 3D printing, etc, this is some golden information! He doesn't explain things like factors that affect routing, power/gnd planes, the soldering process, and other stuff (there is too much to cover in 1 video) but this video is a great place to get introduced to the art of hardware and PCB design. Seriously, if you didn't understand something here but are curious about it, please read deeper into them. If you're a college student looking for a job, this kind of knowledge will impress your interviewers, since most schools don't teach this kind of stuff but is so essential in the industry. Thank you for making this video.

  • @FloydBunsen
    @FloydBunsen 4 года назад +631

    Everyone else: use a teleprompter.
    Zack: uses Google glass.

    • @ZackFreedman
      @ZackFreedman  4 года назад +459

      *builds Google Glass

    • @primtones
      @primtones 4 года назад +28

      Looks weird as he has to move his eyes more due to the close distance.

    • @Reach3DPrinters
      @Reach3DPrinters 4 года назад +25

      @@primtones Thats the kind of weird I subbed for! (:

    • @Phoen1x883
      @Phoen1x883 4 года назад +45

      @@primtones New hack idea: Just display one word at a time in quick succession (like Spreeder), and use voice recognition to control the display rate.

    • @_BangDroid_
      @_BangDroid_ 4 года назад +9

      And a very unobtrusive design. I didn't even notice till I read this comment

  • @HmmmmmLemmeThinkNo
    @HmmmmmLemmeThinkNo Год назад +1

    Fun fact: basically everyone in my family worked for IBM at one point or another, bc that was the main job supplier in the area. My grandmother soldered for them for at least ten years, she didn't work there as long as most of the rest of my family, many of whom actually have a pension from them. And my grandfather had a crapton of acid burn scars from his time working for them.

  • @qazimashhood
    @qazimashhood 4 года назад +645

    Man I would love to be your student XDDD

    • @ZackFreedman
      @ZackFreedman  4 года назад +179

      Thanks a lot! There are plenty more videos like this on the way!

    • @pinpetos
      @pinpetos 4 года назад +42

      But you already are! Just keep watching his videos.

    • @markkaz7754
      @markkaz7754 4 года назад +10

      Wait hes a teacher? Im lazy and i didnt watch the whole video

    • @araxietyne
      @araxietyne 4 года назад +1

      You are

    • @pervaiz853
      @pervaiz853 4 года назад +1

      Ka bol raha ha angrez smj nah ata

  • @sirspamalot4014
    @sirspamalot4014 3 года назад

    I watch your videos on lazy days off and it get me motivated to actually work on my projects, so cheers man, awesome as always

  • @TheHive95
    @TheHive95 4 года назад +10

    This history lesson was super super interesting. I'm an electronics engineer, but didn't know half of this really early stuff! So glad I started when I did

  • @inxiveneoy
    @inxiveneoy 4 года назад +2

    First time I'm seeing Zack Freedman and I've just got to subscribe. Nobody else is going to explain all this cool tech stuff with perfectly synchronized hand gestures, it's beautiful.

  • @MrShmazoo
    @MrShmazoo 4 года назад +21

    You made a fantastic build up to a big finale about the Right to Repair, and I would have loved to hear you talk more about that on the macro scale. Perhaps a bit out of context for this video, but It would be really cool to see you do another on it! Fantastic channel, you bring refreshing enthusiasm and humor that other people of your incredible technical skill currently lack on the platform. Looking forward to seeing more of you as you keep doing your thing!

    • @ZackFreedman
      @ZackFreedman  4 года назад +7

      Yeah, there was originally a bit more, but the video was getting far too long. Right to repair and pro-circumvention will get their own video - I know from college that the economics of third-party repair is really hard to research.

  • @crusinscamp
    @crusinscamp 4 года назад +1

    A long time ago, I laid out some PCBs by hand. Where "paint" is mentioned, we used permanent markers. They're water proof so they resist the ferric chloride etching solution. It was actually pretty much fun to do.
    Printed plastic boards would be nice, but one critical property of PCBs is the ability to resist heat. Soldering is tough on PCBs, some cheap prototype boards can't even take one rework if you make a mistake, the copper delaminates.
    If you want to see some interesting work, search "surface mount pcb repair" (or something like that). There's some amazing skill out there soldering microscopic parts, getting it right and not having any solder bridges.

  • @AbandonRule
    @AbandonRule 4 года назад +126

    This video NOT brought to you by pcbway

    • @ZackFreedman
      @ZackFreedman  4 года назад +33

      The problem with cheap PCB's is that it makes free merch less convincing :|

    • @funy0n583
      @funy0n583 4 года назад +4

      @@ZackFreedman what

    • @cheaterman49
      @cheaterman49 4 года назад +2

      FWIW JLCPCB seems to have faster turnover, even though the assembly capabilities are limited :-)

    • @dieSpinnt
      @dieSpinnt 4 года назад +2

      I use Hydrogen peroxide with hydrochloric acid.
      No need for JLCPCB or PCBway.
      While it can't dissolve invoices of them, it can dissolve most of their annoying key-chain pendants and company logo:P

    • @cheaterman49
      @cheaterman49 4 года назад +2

      @@dieSpinnt Hahaha :-D to be fair I did use Ferrous Chloride for some prototypes early on, but now it's usually breadboard → perfboard → JLCPCB :-D

  • @Weezy4reezy
    @Weezy4reezy 4 года назад

    First video of yours that's hit my feed. It was well produced, you'll hit a million in no time. Subbed.

  • @diamondtroller1253
    @diamondtroller1253 4 года назад +64

    Zack: It's not the best idea to stuff everything in one place.
    Apple: M1

    • @cheaterman49
      @cheaterman49 4 года назад +7

      To be fair that's just standard SoC stuff, which has proven to be both sufficiently reliable & flexible to justify integration :-)

    • @CommonTater100
      @CommonTater100 4 года назад +3

      my thoughts as well. next thing we know we'll have an entire desktop computer in a microSD card

    • @cheaterman49
      @cheaterman49 4 года назад +5

      @@CommonTater100 We already have an entire computer in a RAM module after all :-) (Pi3 compute module hehe)

    • @CommonTater100
      @CommonTater100 4 года назад +2

      @@cheaterman49 that is pretty stinkin' amazing! never heard of it till now

    • @tillorrly1128
      @tillorrly1128 4 года назад

      The Cheaterman

  • @Sneekystick
    @Sneekystick 4 года назад +21

    When he said, “now you are watching RUclips in the bathroom and forget to wipe,” I felt that.

  • @SomaElectricals
    @SomaElectricals 4 года назад +208

    what kind of glass u r wearing on your left eye. what is that

    • @ZackFreedman
      @ZackFreedman  4 года назад +148

      It’s my wearable teleprompter! Check it out: ruclips.net/video/50614QMNQPo/видео.html

    • @AlbertRei3424
      @AlbertRei3424 4 года назад +140

      @@ZackFreedman No it's just a scouter to see power level of people

    • @raven4k998
      @raven4k998 4 года назад +8

      lol welcome to the future baby he's got an augmented reality lens on his glasses that allows him to watch RUclips among other things while making a video for RUclips basically he's multitasking to the extreme

    • @RogerBarraud
      @RogerBarraud 4 года назад +3

      Borg...

    • @raven4k998
      @raven4k998 4 года назад

      @@RogerBarraud nope borg would have in implanted cause that's more fun for borg no need for battery's then

  • @polerix
    @polerix Год назад

    I'm saving this for the next time I teach basic electronics. Absolutely brilliantly done, super well paced, clear and fun.

  • @noahcarver1707
    @noahcarver1707 4 года назад +353

    me: I'm subscribed to this guy right?
    *checks*
    Ah, good.

    • @SixOThree
      @SixOThree 4 года назад +6

      lol I made the same check.

    • @skellious
      @skellious 4 года назад +4

      good shout, I wasn't. now I am. thanks.

    • @julienmauguin3214
      @julienmauguin3214 4 года назад +1

      I wasn't too, don't hit me, i already did

    • @kaball6545
      @kaball6545 4 года назад

      😅same

    • @rampage_sl
      @rampage_sl 4 года назад +3

      Did that halfway through the video

  • @jamtea388
    @jamtea388 Год назад

    This is one of Zack's videos that I rewatch every so often and say "oh, I understand a little better what all this means"

  • @Freeconseil
    @Freeconseil 4 года назад +14

    Thank you!
    Your channel will blow up for sure!

    • @nachiketmhatre7411
      @nachiketmhatre7411 4 года назад

      Absolutely. Terrific content quality and deliered with great wit and presence.

  • @rellikpd
    @rellikpd 2 года назад

    I've been dorking around with solder and circuit boards since the 80s... even "scratching" or running my own lines to "refurb" my own hardware on occasion... So I wasn't a complete idiot when I clicked on this video and yet I still thoroughly enjoyed it :) I like your style and pacing

  • @MrDgf97
    @MrDgf97 4 года назад +4

    RUclips's been very kind and it's recommending your videos! You're gonna blow up in subs soon

  • @CarsSimplified
    @CarsSimplified 4 года назад

    I'm glad RUclips recommended this channel! Great stuff so far!

  • @sandwich2473
    @sandwich2473 4 года назад +7

    It's really interesting how, sometimes we just get it right.
    There is still room for improvement, and there's probably some issues to be solved that people haven't even noticed yet. But overall, it's cool stuff.
    Amazing that it's been that long since we've had them.
    Also, Raytheon making TVs tickles me in a way.

    • @claytonno2571
      @claytonno2571 Год назад +1

      right? i thought "huh, aound even back then"

    • @keiyakins
      @keiyakins Год назад +1

      gotta do something with that CRT manufacturing capacity not currently being used for radar displays ;)

  • @jp-hh9xq
    @jp-hh9xq 4 года назад

    When I watch an engineering video, I always think to myself, "Could I make a better video on this topic?" At 7:25 I am convinced I can't. You covered this topic 100%. Great Job!

  • @JohnDlugosz
    @JohnDlugosz 4 года назад +40

    Future of boards: I speculate that "additive" techniques will be used to lay down copper traces, but they will be actual copper traces not conductive ink or other inferior substitutes.
    Instead of etching off most of a copper coating, start by printing the design using a primer and then soaking the boards adds copper only where the primer was.

    • @OrangeC7
      @OrangeC7 4 года назад +6

      That makes sense, it's one of the only ways the process could be made any cheaper since then you barely have to worry about recycling the copper afterwards.

    • @gunar.kroeger
      @gunar.kroeger 4 года назад +2

      @@OrangeC7 or the etching chemical! what about synthetic materials that are better than copper, like graphene?

    • @NekoApril
      @NekoApril 4 года назад +4

      @@gunar.kroeger I could see graphene being used for modules or small electronics, like smart watches for example, in the not super distant future. However, I'm a bit more skeptical that graphene growing could become affordable for larger circuit boards, such as motherboards.

    • @xXxserenityxXx
      @xXxserenityxXx 4 года назад

      Same process in reverse then?

    • @Micro-Motive
      @Micro-Motive 4 года назад +5

      It's already been done for many years - generally called 'selective electroplating', but used in specialised applications due to higher cost, or practical limitations such as the 'porosity' and 'conductivity' of the plating.
      So-called 'conductive ink/material' processes usually have similar issues of porosity and conductivity.
      Hence 'additive processes' are nothing new either, if you know your engineering or history. 😉
      Possibly the most common substrate materials used to date for these processes would be ceramics and 'Teflon' (PTFE) in high frequency or extreme temperature applications.

  • @alangunn7254
    @alangunn7254 2 года назад

    Thanks Zack! That was a great video!
    Your enthusiastic delivery and jokes are all appreciated, 🙂

  • @jampskan
    @jampskan 4 года назад +7

    i’m hoping that you keep making infotaining vids such as this. i recently got serious about making and electronics; could you do one on oscilloscopes? what does an electronics/maker/3d printer nub really need starting out? all of those knobs look daunting. how often does an ocilliscope come in handy for your prohects & in what ways? what are the main reasons to get one? is the Hantek DSO5102P one on amazon a good deal? can they be hacked to be 200MHz? nice job on the video!

    • @ZackFreedman
      @ZackFreedman  4 года назад +4

      Those are some really good questions that definitely deserve an episode. The maker world has changed tremendously since I got started, and I'm curious how the 'new player experience' has changed.
      I build digital electronics, so the protocol sniffer features on my scope are the most important features. I use a Rigol DS2072, which could hypothetically be hacked to the 200MHz DS2202 model. Pay close attention to scope reviews; you want one with high-quality probes, deep memory, easy-to-read documentation, and a good interface.

    • @SittingDuc
      @SittingDuc 4 года назад

      An o'scope is useful for debugging misbehaving circuits and for reverse engineering unknown circuits. For making my own circuits with an 8266 and some sensors, my o'scope stays on the shelf. For trying to find out if my garage door opener has a 9600 serial port, or a JTAG/test port that I can use to automate the door? Out comes the scope. For my home lab I have a dinky China 20MHz / 50Msample two channel scope; because I seldom need more than 9600 serial, or 115200 serial. And two channels for clock and data, or for doing math like A-B. (Trigger on the clock to see what the data looks like, etc)
      Debugging an unknown connector, first I use a multimeter to check voltages and that gets me DC and verifies I won't hurt myself or my scope. Then the scope gives me waveform and frequency. And if it is serial, a TTL2USB and a laptop or Pi with python gets me the protocol. I guess a less dinky scope would have protocol decode "built in"; but a computer can also transmit ;)
      For 3d printing and electronics, priority 1 is a soldering iron. Then a fume extractor to get the solvent smells away from your face. Priority 2 is a decent pair of calipers, for measuring things and making houses for the PCBs that actually fit!. Then a cheap multimeter, for checking continuity, voltage and sometimes resistance. Many simple IoT or Robotics or quadcopter projects will get by just fine with that. And the o'scope comes out for advanced work, debugging protocols and sensors that misbehave; and for anything with radios.
      I have seen a couple of RUclips videos that discuss basic Rigol and Hantek units; some of them also go into "what can this do?" "Why do you need this?" And "how do I not blow this up?!" (Ground loops aren't just for car stereos! :eek:)
      Good luck and best wishes.

  • @Dchane
    @Dchane 4 года назад +1

    👏 This is probably the most informative and entertaining video I have seen about circuit boards on RUclips. Great job Zack!

  • @Lepo4256
    @Lepo4256 4 года назад +10

    Omg the algorithm lord did it again bringing me to an awesome future-ly huge channel out of nowhere!

  • @ThatsMistaTwistToYou
    @ThatsMistaTwistToYou 4 года назад +1

    I got the "Idiocracy" reference! Kudos. Great videos as always, so glad to have found your channel recently. I am tooling up to get started!

    • @DiogoStuart
      @DiogoStuart 4 года назад +1

      Was looking for this comment! XD

  • @Mrtrunks
    @Mrtrunks 4 года назад +4

    Damn it another channel I need to subscribe to.
    This was a great video, keep up the great work

  • @nickybeingnicky
    @nickybeingnicky 3 года назад

    This was much more detailed than I thought it would be. Nice.

  • @sdjhgfkshfswdfhskljh3360
    @sdjhgfkshfswdfhskljh3360 4 года назад +11

    I think that technology will revert to old 3D design, but with additional stability. Something like sandwich, but not only with copper and dielectric, but also with components. Such devices will be almost non-maintainable, but in many cases it is not needed, since it is cheaper to buy new one than to fix old one.

    • @OtherDalfite
      @OtherDalfite 4 года назад +2

      Honestly, repair becomes cheaper the more spread out the industry is. While it's expensive now, it is really an untapped industry. There is definitely money to be made repairing and reselling old electronics. However with the influx of anti right-to-repair, it will shut down independent review for the most part, and what few repair places are still capable of operating will keep costs artificially high.

  • @claudiowarrens
    @claudiowarrens 4 года назад +2

    This channel deserves more subs, keep it going man!

  • @Terminator85BS
    @Terminator85BS 4 года назад +6

    Hey man, do you have a patreon or something? i'd love to support you some more. love your videos, and your style in general.

    • @ZackFreedman
      @ZackFreedman  4 года назад +3

      It’s in the works, but for now, your kind comment is more than enough!

  • @gutobernardo7457
    @gutobernardo7457 4 года назад

    This is the best video to learn the history and functionality of PCBs! Even though I already knew most of it, you brought even more details and interesting knowledge! Thank you!

  • @noeljonsson3578
    @noeljonsson3578 4 года назад +60

    I don’t have anything to say but I heard leaving a comment is good for the algorithm.

    • @putrid.p
      @putrid.p 4 года назад

      Really? Well, just in case...

    • @ronnetgrazer362
      @ronnetgrazer362 4 года назад +1

      @@putrid.p I'm so engaged right now.

    • @jean-clauded5823
      @jean-clauded5823 4 года назад

      I've heard the same thing..

    • @R4ndomNMBRS
      @R4ndomNMBRS 4 года назад +1

      We pray to the algorithm to supply us with more content as good as this.

    • @azerhudson5393
      @azerhudson5393 4 года назад

      I guess it does

  • @kholdsworth27
    @kholdsworth27 2 года назад

    Any video with an Idiocracy reference deserves a thumbs up!

  • @richfiles
    @richfiles 4 года назад +4

    Dude... I LOLed at blurring the transformer silkscreen on the TV Typewriter board at 4:07

    • @randystegemann9990
      @randystegemann9990 3 года назад

      Great moments in engineering when they mount heavy components on a PCB.

  • @LukeRaus
    @LukeRaus 4 года назад

    Was wondering exactly this a few weeks ago... and then you pop up on my home page! Excellent in-depth video, and I loved the history lesson. Cheers!

  • @TheIBeanz
    @TheIBeanz 4 года назад +71

    What a time to be alive where you can't even say the actual technical name of a component out of fear for getting demonetized..

    • @Lightning_Mike
      @Lightning_Mike 4 года назад +5

      I... I think that was just a joke

    • @Gormadt
      @Gormadt 4 года назад

      Which component?

    • @josugambee3701
      @josugambee3701 4 года назад +17

      @@Gormadt Flame retardant material. Probably because it has "retard" in it, but I've never known anyone who thought that was a bad word.

    • @TheIBeanz
      @TheIBeanz 4 года назад +16

      @@Lightning_Mike I'd like to think that too, but since youtubers are not even allowed to say the word "killed" or "murdered" (even in the context of news or similar) if they want to monetize their video. And since there are algorithms in place that detect "non advertiser friendly words" and which most certainly can not identify context, it does not seem to far fetched.

    • @OrangeC7
      @OrangeC7 4 года назад +11

      @@TheIBeanz "And in other news, a man's existence was ended in florida by Florida Man. More on that after the break."

  • @mikeall7012
    @mikeall7012 4 года назад +1

    Optical circuit boards arnt necessarily new in concept. We use them in the nuke industry for signal and power isolation. Granted it is a pretty narrow application and the cards are super simplistic, when compared to most consumer and commercial based copper circuit boards. Pretty neat stuff though. I didnt realize there were any efforts to use them in more complex applications. It would be nice to see them used in the industrial controls for reasons that would make this text much longer than it already is.

  • @Malaka1802
    @Malaka1802 4 года назад +6

    Thank you for taking the time and making these videos. You may not be as big as other tekkies but you are just as good. Please stay with it :D

  • @Camoceltic
    @Camoceltic Год назад

    5:25
    Two years later, the call to action worked. While I love the 3D printing stuff, the videos going over the hows and whys of electrical engineering will always be my favorites. I think it just tickles the part of my brain that's addicted to the feeling of "I'm going to do that" more than the printing.

  • @mythcrab6047
    @mythcrab6047 4 года назад +21

    I just want the world to know I was here before this dude blew the F up. Cheers Zack.

    • @raven4k998
      @raven4k998 4 года назад +2

      your watching youtube in the bathroom and you forgot to wipe

  • @ViniciusNogueira_Eng
    @ViniciusNogueira_Eng 4 года назад

    Hey man, Im from Brazil and I realy like your videos, please dont stop making it! All the world need you guides.

  • @ataphelicopter5734
    @ataphelicopter5734 4 года назад +14

    Wires tho, they’re on literally everything, regardless of board or not

  • @OnnieKoski
    @OnnieKoski 2 года назад

    A way more fun video than the topic deserves, your writing is superb!

  • @channtron
    @channtron 4 года назад +3

    "The more you know, you are watching RUclips in the bathroom and you forgot to wipe"
    This man is a real wizard.

  • @Dragonmastur24
    @Dragonmastur24 4 года назад +1

    Im loving this channel and you more and more every video, and it started out pretty high tbh XD

  • @TCspooon
    @TCspooon 4 года назад +5

    My toilet was flushing as I heard the words “and forgot to wipe”
    (I did not forget, but a funny coincident anyway)

  • @tomasmartinez8620
    @tomasmartinez8620 4 года назад

    You are realllyy good at explaining things. Coming into the video I expected a basic reason of why they are square. However the video had a very indepth history, kept me watching till the end! Great work, imma sub

  • @margotfreedman8863
    @margotfreedman8863 4 года назад +4

    Pretty damn awesome! Oh, and the video was pretty cool, too! Xoxoxo

  • @edgeeffect
    @edgeeffect 4 года назад

    I don't know why but I keep re watching this one over and over again.

  • @RooonilWazlib
    @RooonilWazlib 4 года назад +8

    "I'll see you in the future."
    Sorry, this is wrong. You will be seeing me in the past as I go back and watch your entire channel's backlog of videos.

  • @Gunbudder
    @Gunbudder 2 года назад +1

    My uncle worked on one of the first rockets that went into orbit and came back (basically the motor for an ICBM). The vibration destroying the solder joints in the circuitry was a big problem. they tried a lot of things, but he told me what worked was when we put down insulation foam, then did point to point soldering on top, then sandwiched more foam on that. That prototype "board" was the first one they tried that didn't get destroyed.

  • @vantagepointsystems4286
    @vantagepointsystems4286 4 года назад +5

    i like this so much I'm watching liking commenting and subscribing from my second channel lmao

  • @ztarblack
    @ztarblack 2 года назад

    damn man, I looooove your pace and content and literally everything about listening to you explain something
    I just found your channel yesterday and I think I will be staying here a while

  • @GewelReal
    @GewelReal 4 года назад +5

    "Here's a 2020 model"
    _shows the i9-10980XE_

  • @Blackeye808
    @Blackeye808 4 года назад

    just binged your whole channel. awesome. love your blaster!

  • @Nono-hk3is
    @Nono-hk3is 4 года назад +14

    Why haven't you showed up in my recommendations before now?

    • @dawidlaszuk
      @dawidlaszuk 4 года назад

      You weren't ready. Welcome to the future.

  • @battlelord5019
    @battlelord5019 4 года назад

    I just found out your channel in my recommendations and I am just loving ❤️ it so much that I can't just stop watching!! You are killing it dude!! ❤️❤️❤️

  • @jamcdonald120
    @jamcdonald120 4 года назад +4

    11:10 apple execs watched this parts and saw $$$$$

    • @ZackFreedman
      @ZackFreedman  4 года назад +2

      Apple gets a lot of flak for how it treats outdated products, but they were one of the first companies to stop specifically designing low-end products and sell refurbs instead. For instance, there is no low-end iPhone X. The XR is a midrange device, and they sell refurbished 8’s to budget customers.

    • @DasAntiNaziBroetchen
      @DasAntiNaziBroetchen 4 года назад +1

      @@ZackFreedman Except here's the issue with that:
      Apple offering refurbished products sounds fine on its own, but it's a symptom of a bigger problem. The problem is they are trying their hardest to make sure *they are the only ones* who can do so.
      Anyone could refurbish and sell their stuff (likely cheaper than Apple offers it for AND offer repairs), like any other product, but Apple is trying to make that as difficult as possible (for example by controlling the market of repair parts, seizing imports and threatening repair shops). What you mentioned is not a good thing, but an example of their shitty practices ("Nobody dare touch our devices except us!").

  • @OMG234able
    @OMG234able 4 года назад

    Subscribed! Recently been slightly curious about PCBs but this video just sent my interest through the roof, especially the prospect of swatting mosquitos with reddit

  • @Flix-f6q
    @Flix-f6q 4 года назад +43

    Move on, just a generic comment for the YT algorithm to spice up the ranking.

  • @willemvdk4886
    @willemvdk4886 4 года назад +1

    "These can run way cooler. Temperature and awesomeness."... You've just earned yourself another subscriber, man! :)

  • @rivkahlevi6117
    @rivkahlevi6117 4 года назад +12

    "this is the modern version"
    Shows electrolytic capacitor that could easily be 50 years old.

    • @CommonTater100
      @CommonTater100 4 года назад +6

      modern as in 'still in use in modern times' not as in 'this was manufactured last week' :)

    • @QuantumFluxable
      @QuantumFluxable 4 года назад +2

      there you go, they're still being manufactured: www.newark.com/illinois-capacitor/226tta500aqw/aluminum-electrolytic-capacitor/dp/66W2884?st=capacitor%2022%20uf
      well it's a different model, less voltage tolerance because of inferior net voltages over in the US, but oh well^^

    • @wesleymays1931
      @wesleymays1931 4 года назад

      Seriously. Who TF uses axial capacitors?

    • @casianreport3318
      @casianreport3318 3 года назад

      @@wesleymays1931 your mom

  • @comeoutandpetg
    @comeoutandpetg 2 года назад

    This may not mean much to you, but literally I play the voidstar mix when I call it a night. Not even pharmaceutical drugs can consistently get me to sleep every night, but these videos literally disconnect me from the crazy in my brain and literally lock into the videos subject matter and in that moment, I can actually sleep. It’s a weird compliment and is no way intended to come across as an insult…on the contrary, you literally help my brain not drive me to insanity…plus the content is super informative and entertaining ❤

  • @rafaellisboa8493
    @rafaellisboa8493 4 года назад +13

    """we ended ww2""" lol the audacity

    • @BradPlaysEverything
      @BradPlaysEverything 4 года назад +1

      Gross huh

    • @janklostermann6664
      @janklostermann6664 4 года назад +2

      Couldn't believe it as well. Nice sounding words for one of the biggest atrocities ever commited. It's as he is almost proud of it.

    • @rafaellisboa8493
      @rafaellisboa8493 4 года назад +1

      @@janklostermann6664 the soviet union ended WWII

    • @dafoex
      @dafoex 4 года назад

      @@rafaellisboa8493 How

    • @rafaellisboa8493
      @rafaellisboa8493 4 года назад +1

      @@dafoex by killing/capturing more than 80% of all german troops, liberating all of eastern europe and the balkans and invading berlin

  • @courtlanddriggs9287
    @courtlanddriggs9287 4 года назад

    This was way more captivating than I expected it to be. Thanks, Zack, I just became a subscribing fan!

  • @Minty1337
    @Minty1337 2 года назад

    around 6:20
    "grizzled chain-smoking machinist" is higher quality and put a better picture in my head than any famous, classical, or otherwise praised literary work in the passed 600 years ever has

  • @SuperMario1005
    @SuperMario1005 2 года назад

    I just recently watched a video from the creator of the little lego block computers, seeing them assemble this 3D circuit board into the shape of the board was really fascinating and shows the versatility of the circuit board to be used in unconventional ways. Thanks so much for the lesson.

  • @andyisverydumb
    @andyisverydumb 4 года назад

    I subscribed not because of the call to action, but because of the sick PCB spins.

  • @drescherjm
    @drescherjm 4 года назад

    2:15 reminds me a little of my senior design project in EE in the mid 1990s. Although we did not have as many components on our board.

  • @SkashTheKitsune
    @SkashTheKitsune 3 года назад

    you done this video at a great time because now you are able to print your own PCB boards at home

  • @ondrejsedlak4935
    @ondrejsedlak4935 4 года назад

    A bit of clarification.
    I used to work in a circuit board factory a long time ago and while home made single sided board may be etched first and drilled later, the process is actually reversed in professional manufacturing.
    The holes are first drilled using a CNC drill (my job). The drilled boards are then sanded down so the holes edges are nice and flat.
    Following that, the boards are washed, and laminated with a special photo-sensitive laminate film.
    The circuit mask is then exposed onto the laminated board (the drilled holes are typically used for the pattern alignment, which is why they need to be done first)
    The exposed parts of the film are washed away using high pressure water jets.
    The boards are then etched, cleaned in acid and finally copper plated to make the tracks more even.
    For double sided boards, it is also plates the inside of the holes (called through-plating).
    Then the green/red/blue/yellow solder mask is applied (yes, we did do all those colours), baked, followed by the component overlay and baked again.
    Then cut up and shipped out.
    Fun times. :)

  • @JashJhaveri
    @JashJhaveri 4 года назад

    very chill and informative video! subscribed

  • @TheJacklwilliams
    @TheJacklwilliams 4 года назад

    Thanks Zack, knocked it out of the park! Keep em coming man! Damn fine work!

  • @devcybiko
    @devcybiko 3 года назад

    I've done the PCB since the 70s. Never thought of them as a component. AND - there was a bunch of cool meta-knowledge in here I never knew. Great video!

    • @watchm4ker
      @watchm4ker Год назад

      That's surprising. Especially once you get to RF-level signals, the natural inductance and capacitance of the traces can quickly rear its head, and there's been a number of tricks to build in antennas, signal filters, transformers, even heating coils strong enough to solder components to the PCB.

  • @dusty92388
    @dusty92388 4 года назад

    Definitely impressed with the quality and informative aspects of this video. Subscribed!

  • @stephenyoud6125
    @stephenyoud6125 3 года назад

    great stuff I learned a lot. Having worked 30+ years for a large US chemical company and my first 6 years in its Epoxy resin business, modern high performance PCB's are made from Epoxy resin with the Fire Retardance coming from the use of Brominated Epoxy resin (made from tetra Bromo Bisphenol-A (TBBA) as opposed to regular Bisphenol-A (BPA) in regular Epoxy resin) and an additional fire retardant additive in the resin formulation. some cheap consumer products not requiring high heat & dimensional stability may still use the older, cheaper laminated paper / phenolic resin boards. looking frwd to viewing more on yr channel

  • @Telerian3
    @Telerian3 2 года назад

    The opidomy of Geekery right here. Thanks for the primer on PCBs

  • @foofyastralpunk5875
    @foofyastralpunk5875 4 года назад

    6:32..... Heyyyyyy, my Dad, Uncle, and Brother are chain smoking machinists!! Thank God they learned CNC programming! loving the content, and your sparkling personality from PNW !

  • @TheNormalUniverse
    @TheNormalUniverse 4 года назад

    Hey this was super fun! Nice work. Can’t wait to see more of your vids

  • @peterhimmelman9241
    @peterhimmelman9241 4 года назад +1

    Awesome video, thanks Zack!

  • @rosonowski
    @rosonowski 2 года назад

    This video autoplayed after your recent one about tying the clock signals on your left and right eye drivers together. Holy A/B, Batman!