014. Tutorial - Circular Magnets and How to use them in your diorama
HTML-код
- Опубликовано: 27 май 2015
- In this episode of "Mechbay Tutorials" I'll be covering the types of magnets that is best suited for diorama use as well as how to apply them. Links to materials are listed below:
11/16" Circular Industrial Magnets: amzn.to/2UgZS07
1/2" Circular Ceramic Magnets: amzn.to/2UiP4OP
Starter Hot Glue Gun: amzn.to/2GWuK2K
Hot Glue Sticks Supply: amzn.to/2tK258H
Pink Foam Insulation 1/2" inch thick: amzn.to/2tKR3Qj
Exacto Knife starter kit: amzn.to/2XzO0by
Exacto Blade #11 Replacement: amzn.to/2tN87Wb
Foam Board: amzn.to/2T9X1cX
Xacto Basic Knifes Starter kit: amzn.to/2XD2Spo
#11 Replacement Blades: amzn.to/2TeiMYU
#2 Replacement Blades: amzn.to/2XIA0wi
#10 Replacement Blades: amzn.to/2HcDf9t
Retractable Utility Knife: amzn.to/2H8xk5c
Utility Knife Blade Replacement: amzn.to/2VD5nGN
Clear Acrylic Design Ruler: amzn.to/2EJux0E
18" Non-Slip Flexible Metal Ruler: amzn.to/2HcDJMP
Try Amazon Prime 30-Day Free Trial: amzn.to/2Hiq4DE
****Mechbay is a participant in the Amazon services LLC Associates Program, an affiliate advertising program designed to provide means for sites to earn advertising fees by advertising and linking to Amazon.Com**** 
Развлечения
I know it's been a while since you posted, but thank you so much for your content. It has greatly helped.
Ace ...thanks bro
Thank you for this video. Its lots of help.
Thanks for sharing.
thanks great tutorial
kairus1 thanks buddy.
Thanks for the tip. Also I rewatched ur video and realized that I had bought and was trying to use the flexible magnets... the polarity actually seems pretty unstable on those
yup. the polarity on those flexible magnets are unreliable and thats one of the reasons i don't recommend. I found that out the same way as you experienced it lol.
Correction: I mentioned in the video that I use a 3/4" circular magnets for 1/2" insulation foam which is NOT correct. I use a 3/4" circular magnets for 1" thick insulation and a 1/2" circular magnets for 1/2" thick insulation foam.
How do u usually charge for a dio?
Bro, can I use Sintra Foam in making dio's? because here in the Philippines I can't find Insulation Foam Board.
I'm not really familiar with Sintra foams +Kelly Concepcion. But from the looks of it, Sinta foam looks more like a foam board. I use foamboard/craft foam for accents only in my diorama. They're not really good as a primary material for the type of dios I'm making. Also, the thickness of the foam as well as the ability to carve on it may not be available.
I'm gonna stick to using styrofoams and fill it with plaster of paris. there's no hope to get those kind of foams here in the Philippines! btw thanks bro :)
Do u have any tips on how to get a magnet out of the foam after being glued? I checked the polarity of the magnets before I glued them but it seems like they are repelling. I don’t know how to get it out without messing up the board. Plz help lol
That happened to me a few times when I was just starting doing dios and using magnets for the first time. You gotta have a system when gluing those magnets to lessen that kind of mistakes like have the magnets connect prior to gluing. now to take it out, i usually just use one of my carving tool with a small hook and slowly pull it out. Another option you can do is heat it up using a hair blow dryer to loosen it up before pulling it out.
For some reason mine don’t work once I glue them into the Foam board, I made sure they were on the right side. Do you know why that might be?
King Dev Supreme do you use hot glue? Cuz I haven’t had much problems using hot glue with these magnets.
Tutorial - Circular Magnets
I made the same mistake choosing the wrong magnets...but i dud something even dumber and bought 2 packs
Lol, i did the same mistake the first time. I still have a pack of those circular flexible magnet gathering dust in my table. I should really just throw it away
Mechbay same here 😂😂😂