Это видео недоступно.
Сожалеем об этом.
MJX HYPER GO 14303 Citroen C3... The World's Best WRC RC!
HTML-код
- Опубликовано: 15 авг 2024
- Check out the newest release from MJX Hyper Go. The 14303 Citroen C3 WRC rally car. We unbox, bash, and review this new 1/14 rocket. MJX is the king of the 1/14th scale bashers and now they are making 1/1 detailed bodies to go with their newest release. So, how does it perform? Tune in and check it out.
Preorder it here!
www.helidirect...
Your reviews are always accurate and give a lot of knowledge. Thanks to you, I buy good cars and have a fun hobby. Thank you always
Thanks. Great hobby.
I'm just replacing the screws as I go. A few assortment kits of 2mm, 2.5mm, 3mm in various types (cap/button/flat) and you can easily find enough fasteners to replace whatever you need to.
Great idea.
That is a great location for this car nice run there good cars this one i think looks awesome and there fast as as well love mine
Thanks. I have 3-4 spots to run my rally cars.
I just purchased one.👍
Love this cars have hyper go drifter and 4*4 Offroad ❤Thanks for nice video and informasjon Thank you.
Thanks. No problem awesome little rig.
Nice video! I have this on pre-order and can't wait. I did just get the 14209 and like it but do agree the throttle delay is annoying but thats an easy fix
How do you fix that easily?
@@RinkaiKouen I have a Flysky transmitter that can hold multiple models so I'm just going to get and install a new receiver. I say easy because many cheaper cars have a combo esc/receiver so you would have to swap both.
@@Glowingtomato Unfortuntely, it seems the throttle delay is an esc issue, not a transmitter/radio problem. On top od that, the esc is not programmable.
The MJX site has a V2 licensed Lancia body now, but I can't find them for sale yet. I love my 14302, but it seems to struggle off-road. The stock servo kept getting jammed to one side and the inside axle tends to drag in hard turns or donuts.. even after switching to 20k diff fluid. Keeping the dirt out of the steering helps, but that's a whole other thing. Maybe I'm just pushing it too hard 🤷♂ Yours seems to run fine!
Sweet I love my lancia. I will have e to take a look at that. Try the dust guard. This is what I use.
Raidenracing Chassis Dirt Dust... www.amazon.com/dp/B08QVK6GZ1?ref=ppx_pop_mob_ap_share
@@hyperc5249Oh thanks man! Added to wish list ..much better than the 1 time use panty hose trick😆
I looking after body I found it.Send you information where you can find them
I just got this one, I’ll pair ir with my flysky controller. Great review 👍👍
Thanks. You can't go wrong with flysky.
I got mine today, impressive rig. I do have a question, how on earth do you adjust the steering linkage? The front tires are facing outwards 😵
@martintrj5620 you want toe out. It helps for cornering.
@@hyperc5249got it! 👍. When the tires wear out, what would you recommend to replace them?
@@martintrj5620 They same ones. These are some of the best tires.
Thank you, is there a certain brand Philips head screwdriver you would recommend? I have MIP RC tools, but unfortunately, they do not make a Philips one.
Kline tool. They make amazing tools for electronics.
@@hyperc5249 Thank you, Great Videos, keep up the amazing work!
Which size of head did you get? I see 100mm and 80mm on offer.
@mrAcneface I got the multiple head that has both and flat head too.
I have others mjx and they are ok, this one came with a longer throttle delay and a click on the trigger, I don´t know why becaushe the others models are ok with the same transmiter, but the car itself is amazing
A new TX/RX will take care of that. It's definitely a good upgrade.
Dumborc with a X6FG fixes it.
When it was just unboxed, it was seen that the steering had toe-out. Does it need to be set to be symmetrical? or just leave it toe out?
Toe out. Toe in or symmetrical is for speed runs and drag racing. Toe out is for turning.
@@hyperc5249thank you for explaining 🙏🏼
Nice video bro. Do you have the link for the dust cover you mentioned please?
Thanks. Here you go.
Raidenracing Chassis Dirt Dust Resist Guard Cover for 1/16 Mini Revo Summit Slash Rally a.co/d/h7Jp6HN
Hi, thanks for the great video! I've ordered mine, just curious about one thing. I use DumboRC DDF-350 transmitter for my Bronco and would like to order DumboRC X6F receiver to use the same transmitter for MJX 14303 as well. Is gyro and receiver seperated in that model or I should order X6FG (with gyro)? I prefer to order X6FG because I will be able to adjust gyro through the transmitter.
Could you please confirm if I will be able to remove the stock gyro and receiver easily?
Gyro and RX are separate. You should be good to go.
Hey, I can't really find the link for the deluxe dust cover for the insides, like you said.
Could you please reply with a link for it?
Thank you.
Raidenracing Chassis Dirt Dust... www.amazon.com/dp/B08QVK6GZ1?ref=ppx_pop_mob_ap_share
Oh and your favorite one too drive? Hope you make en comparison video of the best MJX
Great idea.
Very nice specs, but I still prefer the previous design, haha. Right now, the one I want is the Stinger, but it's almost double the price
STINGER????
@@hyperc5249 ftx stinger, is not a rally car but i think it is a similar platform
@@hyperc5249 Oh, you have a video about it, but under the name of HNR Panther. Do you think this comparison makes any sense, or are they totally different?
@___ll___1321 where did you see that? I have not seen it. I like the Stinger.
Exactly the same.
How did you get the lights to still work with then new receiver? Thanks.
Plug them in. Works just the same as stock.
Trying to find the info on the dust cover. Please assist if possible!! Thanks
Raidenracing Chassis Dirt Dust Resist Guard Cover for 1/16 Mini Revo Summit Slash Rally a.co/d/29DsZPE
Is The front toe adjustable?
Has it plastic or metal spur gear?
Yes, it is adjustable. It has a metal spur gear.
@@hyperc5249 thanks bro, I just ordered it , I from Brasil...I will race it on pavement, in principle. The toe in adjustment is preferred...
Keep up the good work bro. Which MJX type car, truck of buggy is the best one to buy or choose?
LOL all of them!!!! I couldn't choose just one. Jumping the H14BM, speed 14210, rally 14303.
@@hyperc5249 Lol.. Thanks for the quick response bro. It's hard to choose for me 😁lol .. Do all MJX cars have throttle delay?
Facts here, my friend -- for off road, the 16207 buggy and 16208/209 monster trucks are *dialed in* out of the box. The 14301/02/03 road cars are amazing.
I bought the 14210 truggy, it's good fun, but it is WAY twitchier and it rolls like a mofo. The 162XX models are just better overall, IMO.
@@rickrussellI 100% agree. The 14210 is over hyped and imo not the best of them
i just got the 16207 and i'm lovin' it! thinking of getting this one as well. when you did the 40mph speed test, was that running on the 2S battery?
No 3S.
@@hyperc5249 thanks! btw, what type of plug does the battery have?
@@jopann88 Deans T plug.
@@hyperc5249 great! thanks for the info!
Man, phillips hardware drives me crazy. I'm sure it's a cost thing for the manufacturer, especially for budget rigs, but I think I'd rather pay a few more dollars and start out with hex hardware from the jump.
💯
💯
It's a great car.. But its not the best WRC. If This was in a Genuine 1/7 Scale, rockin 6s, I'd agree with you. Even my HPI WR8 Flux is fully Sik, But it's not the best WRC RC car in the world. Thats a big call man.
Best 14th scale Rally Car. Not large scale. I have 3 8th scale rally cars that are ridiculous. That statement has been taken out of context.
@@hyperc5249 I havent taken anything out of context. The title quite clearly reads..
'' The World's Best WRC RC!’ ''
How can someone who stumble across this video take that as something else?!?
I read all the comments on most video's of interest and it really gets annoying as
everytime someone objects to your statements, you get off ya bike and disagree with them and tell them they're wrong. But "" because you have been doing this such a long time "" You know everything.
Let me assure you that you dont ok.
Have you been into RC and electronics since 1976 ?
I have.
I live and breathe it and I ask questions when I don't know the answers. I certainly don't go around telling people I know more than they do.
Humble yourself man...Maybe sometimes you are wrong, Who cares? Just be humble and admit it when you are.
Take it easy.
It's pronounced : Ceetro - N
I hate to bust your bubble, but it is actually pronounced si.truhn (Citroën). But... thank you for your input.
@@hyperc5249wrong
Sitran
So weird, why would you want "real" sponsorship logos on the car?
That's literally free advertising (for the brands) that you, the customer are paying extra for.
I understand paying for a licensed body.
I don't understand wanting the Burma Shave logo on the car instead of the fictional Master Shave logo, especially not when that costs money to license.
I guess just for scale looks. They body is awesome. It's actually one of the less expensive MJX cars.
Can you use the ESC from h14bm in this or the 14301? And if so would it be faster by pressing the power button 5x like bm? Or would I have to use the bm motor as well? Thanks for you insight in advance.
They are the same setup. So, swapping it out wouldn't give you any gains.
@@hyperc5249do you press the ESC button 5x like the bm on the 14303 too? I ordered one that comes today so the curiosity is killing me lol
No. Not on these.