Spraying Two Stages With The RC-1 & Hopper Upgrade
HTML-код
- Опубликовано: 6 сен 2024
- www.royalcoats...
RC-1 Light Attachment - www.royalcoats...
RC-1 Powder Coat System - www.royalcoats...
RC-1 Fan Tips - www.royalcoats...
___________________________________________
AMAZON LINKS:
Piston Removal Tool: amzn.to/3Ju0l9n
Blast Nozzle: amzn.to/3LAUYXn
50 Amp Control Box
Diy Kit: amzn.to/3QAY6ny
Pre Wired Kit: amzn.to/3CjvvPj
_________________________________________
Eastwood upgrades including hoppers, attachments, etc can now be purchased at www.royalcoats...
Eastwood Hopper Upgrade Kit: www.royalcoats...
Eastwood Attachment Kit: www.royalcoats...
___________________________________________
Royal Coats Powder Coating located in Spring, Tx.
281-985-1442 call/text
royalpowdercoats@gmail.com
Want me to powder coat your parts? Reach out and we can make arrangements!
I started this channel to show my process and help others. When I started coating there was limited content accessible for powder coating so feel free to reach out to my email with any questions concerning powder coat or equipment. For more personal 1 on 1 training/advice we can set up a time and date for calls or video calls from 30 minutes to 2 hours. Click this link for more info.
www.royalcoats...
I just picked up a Kool Koat 3.0 system with some accesories. Cant want to spray. Thanks for all your tips.
Going to be snagging one of these pretty soon! Seems like the best gun on the market for this price point..
Nice job!!! Great to know I have someone to learn from…
I really enjoy using mine. Very good job and shipping was fast.
Glad you are liking your new system 👍🏼
The fan tip on the RC-1 is working SO good for me. Home run on that one.
I'm curious what psi you're running with the hopper on the RC-1. My only issue with the RC-1 so far is i have to turn my air up to ~30psi to get a good cloud and I'm going through A LOT more powder than I did with the Eastwood DV. But I'm getting great end results so maybe the extra powder use is worth it in the end.
I’m running 30-40 psi with the hopper.
For me, the hopper and a fan tip seems to be more efficient than the cup for most parts. But sometimes getting great results is worth the possible extra couple bucks in powder on a job. Sure does beat redoing them lol but when a system throws more powder it can tend to have some extra waste than you might be used to with your dv.
@@royalcoatspowdercoating man I'm really getting this thing dialed in. Not wasting nearly as much powder now as I was at first. This setup is incredible for the price. Thank you again, and again, and again!! 😁
@benjaminmeyer8555 how did you get it to stop blowing out so much powder? I have the same issue. I'm using the cup.
How long do you let the first layer burn (half the time from burning time? )
You’ll want to leave it in the oven a few minutes past flow out
Hello sir may I see the inside of hopper upgrade
www.royalcoatspowdercoating.com/product-page/diy-hopper-parts
looks really good
How much powder do you load in your hopper? I noticed if I go slightly above half the capacity, I get inconsistencies and surging
I usually go up to about 3/4 full. But mainly depends on what I am spraying and how much I will need for the job.
Also shipping to Europe? Looking for a new corona system instead of my tribo gun.
Yes I ship international 👍🏼
Seems to spray awesome!! What kV:s did you use to spray the first & second coat? And can this system accept 240V power since I live in Europe?
I sprayed the first coat at around 40kv and second coat around 25kv. The system will accept 100-240v so you will be fine 👍🏼
Yes I am in NZ and works great with 240v
@@royalcoatspowdercoating How can you set this on the device, which number is how many KV?
@@Daniel-jx5rn each number represents increments of 10kv: 1-10kv, 2-20kv, 3-30kv, and so on.
How would u do it without a sandblaster?
I wouldn’t recommend powder coating without sand blasting. If you are doing stuff for yourself just sand it clean but I wouldn’t offer it as a paid service like that.
Can we see your oven ?
I go over it a little bit in "My Garage Powder Coating Shop" video
What is your KV at 40psi or 30psi??
Around 40kv
How many pSI are you using?
@@riaanhunt6377 30-40psi
Is that 30 to 40psi when you are spraying or at the regulator before you pull the trigger?
@@justink2001 I’m taking my reading at the regulator without pulling the trigger.
Do you accept cash app payment
I do
@@royalcoatspowdercoating I’ll send you an email