LED bulbs plug in BUT won't fit into housing?? Try this!
HTML-код
- Опубликовано: 8 сен 2024
- I got h13 (also 9008) led bulbs for my mustang.
the bulb plugged in no problem and lit up. but I could not for the life of me get the bulb to twist into the housing!!! it was the right side and so close to fitting but it would not I tried for hours!!!!
all you need for this is scissors or sand paper.
make sure to watch the video to make sure your having the same problem as me!!!!!
I tried making the video as quick and to the point as possible.
comment down below if you need more help!!!
this was3
hope this helps!!!
h11, h7, LED, halogen, 9007, 9006
I MADE A MISTAKE.
When I showed you how the bulb should go once it's in you actually want the led chips to be at 9 and 3 o clock!!!! NOT 12 and 6 like I showed
You created the most helpful video that I have ever watched on RUclips. Thank you so much...
So glad it helped!!!! It took me so long to figure out!
I had the collar on the factory bulb stay in the car, and the bulb unscrewed without its collar. I didn't notice that, and when I went to put in the led one, I fought and fought to find the sweet spot to line up the 3 tabs but could not. I finally figured out why. The factory collar was still in it. So it was a bitch but with my finger and some pain I was able to push and turn the factory collar counter clockwise and remove it. Then the led bulb went right In to the 3 spots and I pressed and turned it. Thus it was done. I have never had the old bulb separate like that before, what a pain in the ass
If you take out the rubber seal and fits try putting some grease on the rubber seal to help it slide in
Thanks for the video, this was driving me nuts until I made the modifications you suggested worked like a charm
Right on so glad it helped! Took me hours to figure out hahaha
Well got some bulbs for a civic mine fits in floppy and the bulbs are for the car so had to put stock back in
2:57
Mine is like metal and not rubber and it will not fit in snug, there is minimal play. Also it is a h7 led light bulb. I have a 2014 jetta se 1.8t. I'm going to return the item cause maybe it's defective, but seeing your video, I am sure mines came defective.
I'm having this issue on 2019 ford fusion but my issue is the housing attached to the bulb is too long.
"I couldn't figure out what was going on." The Chinese is going on. That's what's Going On. Un freaking believable.
Jesus Loves You
Jesus Loves you too =)
Loved the sound of his own voice
Huh?
My h11 led bulbs have a fan housing as the part you turn. I cant fit this new bulb in my new housing but ive fit the aftermarket bulb in the passenger aftermarket headlight housing already so im trying to figure oill guy
What did you do
My thing is plastic and i can prob alter it to fit but idk. Ig im just out of 40 bucks
Mine was plastic too!