tx16s is my favourite radio coworkers jealous that I can get almost any model and it'll bind I remember one asking me to leave the multiprotocal compatibility list open, and they were quite impressed (we both work at a hobby store)
I recently purchased a TX16s MKII and FrSky X8R. I couldn’t get the X8R to bind using Mode FrSky. The red and green lights would both remain on when I powered up the receiver with the failsafe button pushed in. I changed the Mode to FrSkyX2 and tried again, then it was able to bind. Love your videos! they have helped me immensely 🙂.
Great video, Lee! Thanks a lot! 😃 Just so you know, don't worry if I disappear during the next days... I'm going to my parent's farm and the internet connection is horrible there. 😬 Anyway, stay safe there with your family! 🖖😊
@@Painless360 Well... I'm taking 5 quads with me, only my 5" I'm not taking with me, because I had to change the FC this week and I guess I soldered the video wires inverted. 😬 I won't have time now for work on it, but as soon as I get back I can fix it. 😊 So... Lots of flying until Wednesday, I hope! 😃
On Deviation TX (Jumper T8 v2), there is an option on a sub-protocol of dsm that reads "orange rx". When you select that option and bind the radio and the rx, the orange light inside the rx will go solid. If you do not select this option, you keep getting micro fail safes and the orange light inside the rx will sort of flash in the weird way we see in this video. I'm not sure how to select this particular "orange rx" option in Open Tx.
Your TX16S videos have been indispensable in setting up my new radio. Thanks! Most if it (OpenTX and the TX16S) is making sense except two things. 1) I'm coming from Spektrum systems which are, of course, TAER. In OpenTX Companion radio profile I've set my transmitter to be TAER. But I note that in the Inputs tab it's still AETR, same with the Mixes and Outputs tabs. But the servos are properly mapped in the plane. So where is this re-mapping happening? From everything I can see in Companion and the TX16S channel 1 is aileron, etc. (AETR), so why aren't my channels swapped around incorrectly on the receiver, which is TAER? 2) Changing 'Default Channel Order' doesn't seem to change anything. I've changed it back and forth from TAER to AETR and the Input channels always go AETR in a new model. The new model wizard always defaults to ch 3 for throttle as well, even if I've set the radio up for TAER. I want to understand what's going on in Companion and the radio, not just shrug and say "oh well, it works".
Hey Jessie, short answers are: 1) the channel order only affects models created after the change. The order in the Mixer screen dictates the order of the channels unless you are using one of the protocols like DSM that has a set order then the radio sorts that all out for you. 2) See answer to 1 :D Check out the MPM common questions video for more..
Lee I enjoy each of your videos, they are very easy to follow and practical. Keep at the edge. By the way, being a flyer who comes from Futaba into Open Tx and Radio Master TX16S, what would be your recommendation to buy new receivers and flight controllers (best cost-benefit), to be used in planes and helis? Regards
theres a saying dont fix what aint broke..lol..well now i upgraded to 3.1.92 .My Radio master 168 recievers are great but now my spektrum orange recievers gives me lots of options.My Radio shows DSM then 21F,22F,X1F,X2F and auto for binding options..some work but flash on and off(the light on reciever) some dont work.i dont know which one to choose?.I also am running a R920XV2 (orange reciever)with an extra plug in satellite antenna R110x all orange items from hobbyking.I now have discovered 19 new telemetry sensors because this reciever has external ports for batt,rpm,temp etc.I am having a hell of a time figuring this out.any help would be appreciated.I at the very least need to know which DSM option to pick now.thanks Sean in MA usa.
Great video and thanks for sharing. I just recently upgraded from open tx to edge tx and i had to rebind the x8r and it wouldn't. I belive my edge tx version is v2.9 Providence. If you have any information on what could be wrong, let me know. Thanks in advance.
@@Painless360 i just found out there is a binding issue and i think it was already addressed in edgetx v2.9.8. i am going to upgrade to see if that is the fix. Thank you again
Great tutorial! I've tried binding an old HK-TR6A V1 (also sold as FlySky R6A) receiver to my tx16s, but had no sucess. Do you have any ideia if the tx16s has a compatible protocol? I've tried the flysky protocols, to no success.
Can you tell me in that tx is there any glider model f959 cz i have rc glider from wltoys model no f959, mine original transmitter is not working properly that is i need this kind of transmitter, can you assure me that i can fly my glider with this tx16s
Bonjour sur ma radio master boxer jai mis une futaba enR2106GF en mode international RF CRSF187M CH RANGECH1_16 EXTERNAL RF MULTI FUTABA SUBBTYPE SFHSS JE N'ARRIVE PAS A LE BND MERCI
Je n'utilise pas ces récepteurs ici. Mais en regardant la documentation - www.multi-module.org/using-the-module/protocol-details/sfhss - il semble qu'elle nécessite peut-être un « réglage fin ». Bonne chance
Thanks. I have three DSM receivers from my use with a Spektrum radio. I have tried all three of them on my TX16s radio. They will not bind. When I completer the bind process, the rerceiver light is off and does not come back, plus I get an obnoxious beeping. My second question is one of my DSM receivers has pre-labeled channels. I use AETR. But the order on the DSM is different does that matter?
There are lots of DSM options on the radio, try them all and sometimes you need to use the fine-tune option to get it locked. See my video on that.. Best of luck!
Lee, this is the rx/esc module inside of a 700mm Turbo Timber I purchased in a small lot of planes: DSMX 6-Channel Receiver with AS3X/SAFE, Dual BL ESC From a Spektrum radio it says to toggle the "Gear" switch 5 times to turn on and off the flight modes. I want to use my T16S. Would channel 5 be the G switch on the Rmaster? With a UMX connector, I do not have a battery for this model. Will install an xt30 but there's little lead existing to get one's hands in there...
I have a Radiomaster tx16s and I have had problems binding a 10 channel Lemon dsmp receiver. [All my other DSM receivers have bound and worked without a problem]. It bound ok but only giving 7 channels not 10! I was binding using DSM and sub-protocol AUTO and I made a point of setting channels 1-10 but what ever I tried and what ever sub protocol I used, it always reverted to only 7 channels. The tx was about 3 meters from the rx so closeness was not the problem. I was totally frustrated but eventually after an internet search, I set 1 to 10 channels, Sub-protocol AUTO but I found a setting a few lines lower down the page that said "Auto detect format". I turned that off and the 10 channel rx bound perfectly giving all 10 channels. I wonder if I am the only person the know about this.
I have just purchased 3 of the x8r receivers .Would you recommend flashing them and if so what version of firmware should i download and install onto the sd card in my tx .Once a vesion is selelcted and the the rx has been flashed.Then what option do I select to bind to the newly flashed rx.Im finding it a bit confusing.
This old brain is trying to get my quad "Inductrux" into the 16s without any luck. I found a printout of the quad Horizon Hobby BLH8516 FPV pro manual. Every time a set it up something does not work. Each time is something else.... How do you see it being done? Thanks for any help. Continued success.I have it bound, armed, 1 flight mode. It still way far from where it should when properly setup in the radio. It flys, some control, no hover or change in flight modes. Looking forward to hearing from you and your instruction.
Thanks for you help. Seem to have bound to scout ok. When I bind to Tundra, I get no throttle. Should the model dance on switch on.. doesn't seem to. Perhaps I haven't bound correctly though other surfaces are working. I'm binding orange receiver via dsm auto and I get aileron, rudder, elevator correctly, but no throttle.
Spektrum kit normally uses TAER channel order not AETR. See my MPM quick tips on how that all works - ruclips.net/video/Nii4ElEbg6s/видео.html - that may help..
When I bound my dsmx srxl2 to my tx16s it seems the channel inputs aren’t right. The end points don’t use the full stick throw. Not sure how to fix this. Makes it seem like my rates are super slow.
hello and great videos, would like to know if the TX16S will also work with the RC Tanks like the henglong, torro ,taigen and other brand of tanks that has separate buttons on the remote to start the tanks and also other buttons to shoot the canon and etc, would appreciate your expertise in this field of the hobby. Tank remote has many button to operate its functions. Thank you
Hi Love the channel very informative. Looking at getting into the hobby so have built a cessna 162 (980 wing) and ordered a RM TX16S Max. Can I use the Spektrum AR637T 6 channel receiver in the tx16s? will it support the SAFE functionality thanks
my local hobby shop told me that if i bought the tx16s transmitter it wont bind in a receiver that has as3x and safe technology and if it did it wont be functional is that correct? or was he just trying to upsell to on buying a spektrum transmitter. please help
@painless360 please help. I am trying to bind a FRSky xm+ but my radiomaster tx16s doe not have FRSy d16 it has FRSky x and FRSky X2 but not plain FRSKy d16
Is it true that the TX16s Multiprotocol will NOT work with Frsky ACCESS (have heard that may be a propriety protocol) receivers like R-XSR , or do you just need to flash the receiver to make it work? Would be nice to see some kind of TX16s/receiver compatibility matrix. Thanks for all the great content!
Check out my video on the common Multiprorocol module questions I cover this and how to find out more about what protocols are supported.. Best of luck
@@Painless360Hi. I just bought a MKII MAX. If I want to bind my RX8R FrySky receiver with telemetry on and on 9ms mode what sub protocol do I choose for the RadioMaster for ACCST V1 firmware on the receiver ? I don't need 16 channels I only need 8. I won't be using redundancy either. Should my RC boat servos be connected to PPM output or SBUS ?
Most of the popular radios are OpenTX powered now and that can be a little overwhelming for a newer pilot to program and setup. I have covered my favourite options in the Kit Picks 2020 video that does cover the non OpenTX options for newer pilots too. I hope that helps..
@@Painless360 it's an eflite 10a esc. Works ok with another rx. With the ar6310 spectrum rx. It will go into esc calibration mode but it won't activate. When throttle stick is moved from max to min nothing happens. On the monitors the lowest stock position indicates -100
Tricky to help without knowing the exact part number so I can look up the manual. It sounds like you've calibrated a throttle before so just remember that for many ESCs, waiting too long to pull the throttle down to zero after powering on with the throttle at 100% can mean that the ESC enters programming mode. Best of luck
Hiya there! i've got the same setup as you at 8:40, however my X8R is not binding. Mine also says FrSkyX, not just FrSky for the RF Module...? ANyway, it doesn't bind. TX is on, then i hold the F/S button on the X8R, turn on the power, then I click bind on the remote... nothing. none of the FrSky protocols seem to want to bind. any fix?
You're doing everything I would by the sound of it. There are only four options for ACCST frsky protocol. I'd triple check that is what the RX has on it... Best of luck
@@Painless360 Well, i'm going to flash a new multi-protocol module, although i was already using V1.3.3.3 when you are in this video still on V1.3.1.36... idk. I'm in the EU so i'm not sure if i actually bought the X8R-EU version or what, but i tried LBT and that didn't work either. time to try again i guess... since my TX16s refuses to charge for some reason, i'm currently waiting on the batteries to recharge lol
How do you get more than 8 channels on your receiver? If you are using a plane that needs more than 8 channels. Like ailerons on each channel, flaps and want to add smoke and retracts.
@Painless360 where do I find this information? I've looked and looked but not much luck. I did find one video where a guy bound a 8 channel and a 6 channel to get 14 channels. I didn't know you could bind 2 receivers for total of 14 Channels.
Hi. Nice video. Just a question concerning the tx16s transmiter performance. What about the range of this radio with this dsm receiver?. I purchased this radio and I wonder if the power trasmision is so good as a original spektrum radio....I have several orange dsmx receivers and one original spektrum receiver. What is you experience?. Thank you in advance. Cheers
See my video on power in the Tx16s series.. The big thing to do is tune the radio. See my video on the top multiprotocol tips and tricks... Happy flying
@@Painless360 .... I know you use the Crossfire but I couldn't found the full version of it, and I had to make a quick decision at that time.... I hope the R9M is a good choice. Thank you. Keep posting videos I really enjoy them.👌
I’m trying to bind to one of my Spektrum receivers and have a problem. With the esc connected to the throttle connection on the receiver it will not bind. It will however bind with the esc connected to the aileron connection on the receiver. So I set everything up using the gear connection on the receiver for ailerons and everything works. This is ok but now I’ve discovered there is no fail safe setting available in the transmitter menu and when I turnoff the transmitter everything stays at last instruction including the throttle. Have I connected something wrongly or is this a software problem. I hope you can help as I bought the transmitter so that I would only need one but it seems I may have been mistaken.
Problem sorted. It was because I’d used the default Module Satus. I had used channel numbers in the order they are on the receiver ie throttle on channel 1, aileron on channel 2 etc. I should have used AETR for the channel numbers ie aileron on channel 1, elevator on channel 2 etc. The failsafe is now working correctly.
2 question that have been bothering me.maybe u can help. 1st,IS it normal that i lose signal (rssi lost) when my radio is within a couple inches from plane/reciever?.it does this with differant recievers that i have bound..As soon as i pull radio away from plane, rssi recovers. 2nd,my spektrum recievers light flickers as yours did when bound.They do not do that when bound to my spektrum radio.thanx sean..
Hello! Do you know if its possible to set throttle trim button on a 3 pos swich, max trim, trim center and min trim? I want that function to kill the Idle on my nitro plane. All your tutorials är great! Thanks!
When I bind my Spektrum type receivers to my Spektrum tx I get a solid light from the rx. Would you have got a solid light if you had used the DSM "Auto" sub-protocol ?
@@Painless360 just thought you should know, the flashing light on the receiver was because you had left the Tx on and the Rx thought that there had been a signal loss when it was unplugged. Most DSM Rx flash once for each time there has been a signal loss.
Thanks for the video Lee, Very helpful. How about binding to the spectrum AR636A receivers. I have had trouble with them and they come in there bind and fly airplanes. Thanks.
I've never had one in here so can't comment from my own experience. They use the standard protocol so I've no idea why you can't bind. They will expect a very specific channel order though.. Best of luck!
@@Painless360Unfortunately I have been having major problems binding to the AR636B reciever on my aeroscout. My TX16s has internal ELRS so I have the 4-in-1 module in the bay. It's to the point where I am wondering if the module is bad (it's new). I ended up ordering a FRSKY and an ELRS reciever just to test. Would suck to lose SAFE and AS3X, but it's better than not being able to fly the plane at all.
@@gagegrI’m having problems as well, the receiver light won’t go solid but it seems to know I’m trying to bind. It blinks rapidly about 6 times then goes off. The receiver is the ar631
@@jacobwebb6492 So I furgured this out (for my problem). In the model setup choose MULTI then DSM. I originally tried selecting DSM2 or similar to begin with instead of MULTI:DSM. Hope this helps!
Great Video !!!, please, help me to decide me to buy this Radio, Today I have my entire models flying with the international version of the Frsky DR8-II Plus old receiver, do you think this gonna work to bind these olds DR8-II Plus (D8) receivers to this RadioMaster ? , please I need help, because my old Taranis DX9 (international version) has "gone", waiting for your answers, greetings from Sweden !
@@Painless360 thanks Therefore is receiver ar6210 which does not support. you have an orange if you turn off the orange receiver on your radio Do you get a lost receiver warning?
hi nice video so please i need your precious help. recently they gave me a walkera runner 250 without the tx and i tried to bind the Devo rx710 with my t18 pro but without positive results. I have selected devo protocol but nothing !!the rx does not bind. some advice ? thanks thanks in advance.
Hello, I'm trying to bind a RX8R-pro receiver to TX16S and the only way I could do it is with telemetry OFF option. If I have it set to ON, at the end of the binding process I have red light on RX and green light sometimes blinks. Do you by any chance know that that is? I tried re-flashing RX with v1, v2 and v.2.1 firmware. Tx and internal module are both up to date.
No idea. If it works on the other receivers then maybe it is something specific to that Rx. I've not got one here to test so let me know if you get it working..
@@Painless360 Thanks. I think I found the issue. Looks like it's the power supply - when telemetry is off the RX uses less power and work ok; when telemetry is on, the RX turns on the internal telemetry transmitter, uses more power and the current supply drops... Anyway, thanks for your comments!
I'm guessing you've not seen my videos on that radio then? OpenTX does not generally support touch so it is not available on other radios. That was a 'special' to get it to work on that radio. The OpenTX interface isn't optimised for touch - yet. www.open-tx.org/radios will show you how the official support is going.. ;)
@@Painless360 Lee I find it, fine tuning on +40 and it worked. Fantastic Radiomaster TX 16S. Altogether we solve all problems. Thank you for your support.
@@Painless360 scratch that build i got it sorted. But! I have another wing problem this time lolsetting up a dart 250 on a crossfire micro v2 with the adapter board. Iv got ailerons working as they should and the right elevator working in harmony but the left elevator is still working as an aileron in the wrong direction. Cznt for the life of me reverse it😭
@@Painless360 no thats my problem. First time in 10 years I think without using a flight controller . I can remember years ago it was a faf to learn how to program a second aileron. Just using a crossfire micro v2 with the breakout board and servos and esc connect to that.
Esqueci de falar também ... O AFHDS2A RX não funciona tbm!!! Como RX DSM funciona e outro que funciona é o FrSky (ACCST) mas dando telemetria perdida mesmo em curta distância média e longa distância... Como DSM não tem telemetria ele não dá nenhum status Como AFHDS2A não concluí o Bind não tenho dados de telemetria sobre perto... Média e longa distância.
Consulte o link na descrição do WIKI que lista os protocolos compatíveis. Veja minha configuração de helecóptero E160 para outro exemplo de ligação de receptor. Boa sorte
@@Painless360 Hey .. I finally got the Aerosout binded and surfaces matched. I have three standard type planes. Having all sorts of problems understanding if I eed to set up TAER, RETA etc.. but by trial and error I've got one plane in, with a throttle cut. Will look at dual rates etc , and programming the Tundra and conscendo with Flaps now. I've come from Spektrum dx6. Thanks - just difficult as there's no one really to actually talk to - my friend flies DJI FPV systems, and that makes the two of us that fly RC in this little town.
TAER etc. is the default channel order that is sent to the receiver and you can see that order in the MIXER screen on the radio. On a standard PWM receiver that dictates what channels come out of which PWM slot on things like FrSky (i.e. Thr = CH1, Ail = Ch2 etc.). Some systems like Spektrum have a set order (TAER) so they need and multi-protocol radios do all of the clever stuff for you to remap the channels on the radio to be the ones that the specific receiver is expecting. See ruclips.net/video/Nii4ElEbg6s/видео.html
@@Painless360 thanks so much for your time.. I have the tundra setup now but with a minor problem - no throttle ! Firstly, I wonder if I bound correctly, should I always get a dance when switching on ? Orange r620x v3. I think it must be bound correctly as I get correct aileron, rudder, and elevator functionality. Just no throttle. Did I absolutely have to set to stock spektrum Taer ? As for some reason I have set to rtea. It just worked on the R636 in my aeroscout.. Not gunna let this thing beat me.. 1 full day in. Lol. Thanks.
Hello. Do I need to re-bind transmitter every time I switch Models (in the TX16)? I only have a helicopter (physical) and Trainer model for simulators.
Thanks. I just rebind again and it is fine. My heli is 3 blade trex 500 now and it is totally different in setup. First thing I noticed is you have to turn down cyclic gain knob on Microbeast plus to negative values. And it starts behave more stable). Maybe you have other suggestions? @@Painless360
tx16s is my favourite radio
coworkers jealous that I can get almost any model and it'll bind
I remember one asking me to leave the multiprotocal compatibility list open, and they were quite impressed
(we both work at a hobby store)
This channel is The Encyclopedia of RC.
I recently purchased a TX16s MKII and FrSky X8R. I couldn’t get the X8R to bind using Mode FrSky. The red and green lights would both remain on when I powered up the receiver with the failsafe button pushed in. I changed the Mode to FrSkyX2 and tried again, then it was able to bind. Love your videos! they have helped me immensely 🙂.
same here, worked on frsky x2
Bonjour et merci pour les photo pour la futaba merci beaucoup et bonne journée à vous très bonne vidéo
Vous êtes les bienvenus. Bon vol !
I've noticed that some DSM receivers wont bind if they're too close to the radio. Moving it a couple of meters away usually fixes the problem.
OH SO THATS WHY
thank you
I couldn't figure out why it wouldn't bind, but then it suddenly did, and I had no clue why it worked
Great video, Lee! Thanks a lot! 😃
Just so you know, don't worry if I disappear during the next days... I'm going to my parent's farm and the internet connection is horrible there. 😬
Anyway, stay safe there with your family! 🖖😊
You too - I hope you get some time to fly while you're there!
@@Painless360 Well... I'm taking 5 quads with me, only my 5" I'm not taking with me, because I had to change the FC this week and I guess I soldered the video wires inverted. 😬
I won't have time now for work on it, but as soon as I get back I can fix it. 😊
So... Lots of flying until Wednesday, I hope! 😃
On Deviation TX (Jumper T8 v2), there is an option on a sub-protocol of dsm that reads "orange rx". When you select that option and bind the radio and the rx, the orange light inside the rx will go solid. If you do not select this option, you keep getting micro fail safes and the orange light inside the rx will sort of flash in the weird way we see in this video. I'm not sure how to select this particular "orange rx" option in Open Tx.
If the radio is a MPM radio (multiprotocol) then selecting DSM should get you close.. Best of luck!
Your TX16S videos have been indispensable in setting up my new radio. Thanks! Most if it (OpenTX and the TX16S) is making sense except two things.
1) I'm coming from Spektrum systems which are, of course, TAER. In OpenTX Companion radio profile I've set my transmitter to be TAER. But I note that in the Inputs tab it's still AETR, same with the Mixes and Outputs tabs. But the servos are properly mapped in the plane. So where is this re-mapping happening? From everything I can see in Companion and the TX16S channel 1 is aileron, etc. (AETR), so why aren't my channels swapped around incorrectly on the receiver, which is TAER?
2) Changing 'Default Channel Order' doesn't seem to change anything. I've changed it back and forth from TAER to AETR and the Input channels always go AETR in a new model. The new model wizard always defaults to ch 3 for throttle as well, even if I've set the radio up for TAER.
I want to understand what's going on in Companion and the radio, not just shrug and say "oh well, it works".
Hey Jessie, short answers are:
1) the channel order only affects models created after the change. The order in the Mixer screen dictates the order of the channels unless you are using one of the protocols like DSM that has a set order then the radio sorts that all out for you.
2) See answer to 1 :D
Check out the MPM common questions video for more..
Thanks for the video! Useful content!
Great tutorial Lee thankyou buddy.stay safe my friend
hi can this radio with edge tx on it bind to frsky v8fr-ll receivers thanks
Lee I enjoy each of your videos, they are very easy to follow and practical. Keep at the edge. By the way, being a flyer who comes from Futaba into Open Tx and Radio Master TX16S, what would be your recommendation to buy new receivers and flight controllers (best cost-benefit), to be used in planes and helis? Regards
Check out my Kit Picks 2020 video. A quick look at the recent builds and you'll see the same kit being used again and again... Happy flying
@@Painless360 Lee, thank you. Regards
theres a saying dont fix what aint broke..lol..well now i upgraded to 3.1.92 .My Radio master 168 recievers are great but now my spektrum orange recievers gives me lots of options.My Radio shows DSM then 21F,22F,X1F,X2F and auto for binding options..some work but flash on and off(the light on reciever) some dont work.i dont know which one to choose?.I also am running a R920XV2 (orange reciever)with an extra plug in satellite antenna R110x all orange items from hobbyking.I now have discovered 19 new telemetry sensors because this reciever has external ports for batt,rpm,temp etc.I am having a hell of a time figuring this out.any help would be appreciated.I at the very least need to know which DSM option to pick now.thanks Sean in MA usa.
Is it possible to use receivers with JR DSMJ protocol? I couldn't use it.
Thanks Painless awesome man !
Great video and thanks for sharing. I just recently upgraded from open tx to edge tx and i had to rebind the x8r and it wouldn't. I belive my edge tx version is v2.9 Providence. If you have any information on what could be wrong, let me know. Thanks in advance.
The Multiprorocol module has support for all the options for Frsky D16 binding, make sure you are using the right one... Best of luck
@@Painless360 i just found out there is a binding issue and i think it was already addressed in edgetx v2.9.8. i am going to upgrade to see if that is the fix. Thank you again
But when I fly it with DSMX receiver, always said rf signal low, then I lost my control.
Did u ever find a fix I am getting something and can’t figure it out losing my planes to crash’s scared to fly anymore
I noticed you selected bind CH 1-8 Telem ON at 8:41 does this mean you only get 8 channels rather than 16 ?
Great tutorial!
I've tried binding an old HK-TR6A V1 (also sold as FlySky R6A) receiver to my tx16s, but had no sucess. Do you have any ideia if the tx16s has a compatible protocol? I've tried the flysky protocols, to no success.
You can look up the available protocols here - github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md
Hello, what radio compatible with orange besides spektrum ?
Do all radio master bind on DSM2 receiver ,?
Compatability with the Spektrum DSM protocols come from the Multiprorocol module... See my videos on it... Best of luck
Can you tell me in that tx is there any glider model f959 cz i have rc glider from wltoys model no f959, mine original transmitter is not working properly that is i need this kind of transmitter, can you assure me that i can fly my glider with this tx16s
Bonjour sur ma radio master boxer jai mis une futaba enR2106GF en mode international RF CRSF187M CH RANGECH1_16 EXTERNAL RF MULTI FUTABA SUBBTYPE SFHSS JE N'ARRIVE PAS A LE BND MERCI
Je n'utilise pas ces récepteurs ici. Mais en regardant la documentation - www.multi-module.org/using-the-module/protocol-details/sfhss - il semble qu'elle nécessite peut-être un « réglage fin ». Bonne chance
Can you bind it the other way? Orange TX binding to a FRSKY receiver? I have an orange TX and new drone has a X4R frsky receiver.
Not really. It's the power of the multi protocol module in the radio that allows this to work... Best of luck
Can binding two receiver like one tbs crossfire and one futaba or spectrum
You can have both the internal and external radio systems active at the same time so maybe. Let me know if it works... Happy flying
Hi Great Videos, Do you think the KDS K-8X receiver can be bound to the TX16s? Cheers
I don't think so. ruclips.net/video/DfKyx0yTbXU/видео.htmlfeature=shared covers how to check. Best of luck
Thanks. I have three DSM receivers from my use with a Spektrum radio. I have tried all three of them on my TX16s radio. They will not bind. When I completer the bind process, the rerceiver light is off and does not come back, plus I get an obnoxious beeping. My second question is one of my DSM receivers has pre-labeled channels. I use AETR. But the order on the DSM is different does that matter?
There are lots of DSM options on the radio, try them all and sometimes you need to use the fine-tune option to get it locked. See my video on that.. Best of luck!
Thanks I will. You say there are lots of DSM options. I have only found two. DSM and DSMRX@@Painless360
Can I bind a spectrum dsmx receiver to my radio master tx12
ruclips.net/video/DfKyx0yTbXU/видео.html explains how to check.. Best of luck
Lee, this is the rx/esc module inside of a 700mm Turbo Timber I purchased in a small lot of planes:
DSMX 6-Channel Receiver with AS3X/SAFE, Dual BL ESC
From a Spektrum radio it says to toggle the "Gear" switch 5 times to turn on and off the flight modes. I want to use my T16S. Would channel 5 be the G switch on the Rmaster? With a UMX connector, I do not have a battery for this model. Will install an xt30 but there's little lead existing to get one's hands in there...
You can set up any switch on the radio to be CH5. Check out my OpenTX mix school for how to do it easily. Best of luck!
I have a Radiomaster tx16s and I have had problems binding a 10 channel Lemon dsmp receiver. [All my other DSM receivers have bound and worked without a problem]. It bound ok but only giving 7 channels not 10! I was binding using DSM and sub-protocol AUTO and I made a point of setting channels 1-10 but what ever I tried and what ever sub protocol I used, it always reverted to only 7 channels. The tx was about 3 meters from the rx so closeness was not the problem. I was totally frustrated but eventually after an internet search, I set 1 to 10 channels, Sub-protocol AUTO but I found a setting a few lines lower down the page that said "Auto detect format". I turned that off and the 10 channel rx bound perfectly giving all 10 channels. I wonder if I am the only person the know about this.
I'd check out the wiki in case others have reported it. If not, then make sure you are on the latest versions and report a bug. Best of luck!
hello, is it possible to connect this rx d16 to a flight controller?
Yes, see my build series on the channel... best of luck
Does this still work with tx16s with elrs?
This was specific to Frsky.. Happy flying
Thanks for all of this good info from this, but if anybody knows how to set up differential thrust I could use some help with that.
Hallo,
Can you pleased demonstrate the Variometer setting between
Radiomaster TX16i and Receiver FR SKy GR-X8?
WFG Roland
Good video however, you probably should cover RSSI fine tune.
Already done. Check out the video on the MPM tips and tricks.. Happy flying
i noticed on the spektrum the channels on your little monitor weren't reaching the endpoints. is that normal for spektrum?
It's what my old Spektrum radios used to do.. Happy flying
Do you know whether you can do forward programming spektrum receiver with the radiomaster?
It is not something I've ever looked into. Sorry I can't be more help. Best of luck!
I have just purchased 3 of the x8r receivers .Would you recommend flashing them and if so what version of firmware should i download and install onto the sd card in my tx .Once a vesion is selelcted and the the rx has been flashed.Then what option do I select to bind to the newly flashed rx.Im finding it a bit confusing.
You need to use the same as is on the radio. See ruclips.net/video/aZhvnm8j88M/видео.html
Can the frsky TD R10 receiver compatible with the tx16s?
I doubt it. ruclips.net/video/DfKyx0yTbXU/видео.html shows you how to check.
This old brain is trying to get my quad "Inductrux" into the 16s without any luck. I found a printout of the quad Horizon Hobby BLH8516 FPV pro manual. Every time a set it up something does not work. Each time is something else.... How do you see it being done? Thanks for any help. Continued success.I have it bound, armed, 1 flight mode. It still way far from where it should when properly setup in the radio. It flys, some control, no hover or change in flight modes. Looking forward to hearing from you and your instruction.
I've never had one here to try. Happy to answer any specific questions you may have... Best of luck
Thanks for you help. Seem to have bound to scout ok.
When I bind to Tundra, I get no throttle.
Should the model dance on switch on.. doesn't seem to. Perhaps I haven't bound correctly though other surfaces are working.
I'm binding orange receiver via dsm auto and I get aileron, rudder, elevator correctly, but no throttle.
It finds dsm 2 , 22ms.
I have throttle notifying 0-100 on the monitor, but no action.
Set on ch3.
Spektrum kit normally uses TAER channel order not AETR. See my MPM quick tips on how that all works - ruclips.net/video/Nii4ElEbg6s/видео.html - that may help..
P.S. Also try DSM2 11ms too (remove the prop while you're testing ;) )
@@Painless360 thanks again..
Complete noob error.
Tx wasn't calibrated correctly.
When I bound my dsmx srxl2 to my tx16s it seems the channel inputs aren’t right. The end points don’t use the full stick throw. Not sure how to fix this. Makes it seem like my rates are super slow.
Try the other protocol setting.. Best of luck
Hello i'm a bit confused with the crossfire. Which receiver do i need to choose on the tx16 when i want to bind the crossfire?
Check out my Crossfire of beginners series that covers all of that. CRSF for external RF is the one you want. Best of luck
hello and great videos, would like to know if the TX16S will also work with the RC Tanks like the henglong, torro ,taigen and other brand of tanks that has separate buttons on the remote to start the tanks and also other buttons to shoot the canon and etc, would appreciate your expertise in this field of the hobby. Tank remote has many button to operate its functions. Thank you
See my Opentx videos on setting up stuff for complex projects.. Best of luck
With the new version of 2.80 how do you bind to a SPECTRUM RX. { RADIOMASTER TX 16S} LOOKING FORWARD TO YOUR REPLY.
Process is basically the same. Check out the documentation for the latest changes... Best of luck
Nice video. Can the radio only work with the TBS system or would it work with other external modules?
Yes. Check out the Tx16s and Crossfire playlists..
Hi Love the channel very informative. Looking at getting into the hobby so have built a cessna 162 (980 wing) and ordered a RM TX16S Max. Can I use the Spektrum AR637T 6 channel receiver in the tx16s? will it support the SAFE functionality thanks
I can't see why not but I've not tested it here.. Best of luck!
my local hobby shop told me that if i bought the tx16s transmitter it wont bind in a receiver that has as3x and safe technology and if it did it wont be functional is that correct? or was he just trying to upsell to on buying a spektrum transmitter. please help
As those receivers use standard Spektrum protocols that this radio probably supports I'd question that one ;)
@painless360 please help. I am trying to bind a FRSky xm+ but my radiomaster tx16s doe not have FRSy d16 it has FRSky x and FRSky X2 but not plain FRSKy d16
Try the Frsky X or X2. One should work. See my video on how to find out what protocol you need.. Best of luck
Is it true that the TX16s Multiprotocol will NOT work with Frsky ACCESS (have heard that may be a propriety protocol) receivers like R-XSR , or do you just need to flash the receiver to make it work? Would be nice to see some kind of TX16s/receiver compatibility matrix. Thanks for all the great content!
Check out my video on the common Multiprorocol module questions I cover this and how to find out more about what protocols are supported.. Best of luck
Hi. I have 2 FrySky X6R receivers on two of my RC boats but my latest boat has Spektrum DSMR. Can the RadioMaster bind to DSMR ? SL315 receiver ?
This video shows you how to figure that out - ruclips.net/video/DfKyx0yTbXU/видео.html - best of luck!
@@Painless360Hi. I just bought a MKII MAX. If I want to bind my RX8R FrySky receiver with telemetry on and on 9ms mode what sub protocol do I choose for the RadioMaster for ACCST V1 firmware on the receiver ? I don't need 16 channels I only need 8. I won't be using redundancy either. Should my RC boat servos be connected to PPM output or SBUS ?
Hi Lee. Am looking for a first time tx. Is this the one or any other suggestions to a simple beginner (ex 30 year ago flyer) TIA
Most of the popular radios are OpenTX powered now and that can be a little overwhelming for a newer pilot to program and setup. I have covered my favourite options in the Kit Picks 2020 video that does cover the non OpenTX options for newer pilots too. I hope that helps..
I have a flysky receiver that is ppw and I get it to bind to my Radiomaster but when I Goto betaflight it doesn't receive any signals. Any idead?
It depends on what you are plugging it into. I'd check the manual for the flight controller you are using.. Best of luck!
Just got a used eflite plane with an AR6310 rx. It binds OK with all servos working but refuses to calibrate the esc. Any ideas?
What ESC? What troubleshooting have you already done?
@@Painless360 it's an eflite 10a esc. Works ok with another rx. With the ar6310 spectrum rx. It will go into esc calibration mode but it won't activate. When throttle stick is moved from max to min nothing happens. On the monitors the lowest stock position indicates -100
Tricky to help without knowing the exact part number so I can look up the manual. It sounds like you've calibrated a throttle before so just remember that for many ESCs, waiting too long to pull the throttle down to zero after powering on with the throttle at 100% can mean that the ESC enters programming mode. Best of luck
Hiya there! i've got the same setup as you at 8:40, however my X8R is not binding. Mine also says FrSkyX, not just FrSky for the RF Module...? ANyway, it doesn't bind.
TX is on, then i hold the F/S button on the X8R, turn on the power, then I click bind on the remote... nothing. none of the FrSky protocols seem to want to bind. any fix?
You're doing everything I would by the sound of it. There are only four options for ACCST frsky protocol. I'd triple check that is what the RX has on it... Best of luck
@@Painless360 Well, i'm going to flash a new multi-protocol module, although i was already using V1.3.3.3 when you are in this video still on V1.3.1.36... idk.
I'm in the EU so i'm not sure if i actually bought the X8R-EU version or what, but i tried LBT and that didn't work either. time to try again i guess...
since my TX16s refuses to charge for some reason, i'm currently waiting on the batteries to recharge lol
Best of luck!
dame lee 6.30am upload. dedicated or what
Naw, I have lots of videos on the channel waiting to be released. Schedule is normally for 6am UK time.
How do you get more than 8 channels on your receiver? If you are using a plane that needs more than 8 channels.
Like ailerons on each channel, flaps and want to add smoke and retracts.
You can bind multiple recovers to the radio or use something like an SBUS to PWM converter (among other options). Best of luck!
@Painless360 where do I find this information? I've looked and looked but not much luck. I did find one video where a guy bound a 8 channel and a 6 channel to get 14 channels. I didn't know you could bind 2 receivers for total of 14 Channels.
It's outside there. See ruclips.net/video/ST9LON1-Bvg/видео.html for example. Best of luck
Hi. Nice video. Just a question concerning the tx16s transmiter performance. What about the range of this radio with this dsm receiver?. I purchased this radio and I wonder if the power trasmision is so good as a original spektrum radio....I have several orange dsmx receivers and one original spektrum receiver. What is you experience?. Thank you in advance. Cheers
See my video on power in the Tx16s series.. The big thing to do is tune the radio. See my video on the top multiprotocol tips and tricks... Happy flying
@@Painless360 Thank you !
will this radio work for the newbeedrone mockingbird frsky d8
If that's the protocol - yes. See how to check covered in this video..
Can the Transmitter bind to any spectrum reciver?
See my video on Multiprorocol module tips and tricks video that covers how you can check. Best of luck
Excellent video...... I ordered the TX16S, the Baby Crocodile and the R9M 2019 module for long range.... do you have a video setup?
Thx.
Not for the R9M, I use hte Crossfire system here. I have videos on the other things (both are great choices BTW!)
@@Painless360 .... I know you use the Crossfire but I couldn't found the full version of it, and I had to make a quick decision at that time.... I hope the R9M is a good choice.
Thank you.
Keep posting videos I really enjoy them.👌
Tanks
Could you do a range test with L9R, compared to the range test with taranis and radiomaster?
Sorry but I don't use those here. Best of luck!
I’m trying to bind to one of my Spektrum receivers and have a problem. With the esc connected to the throttle connection on the receiver it will not bind. It will however bind with the esc connected to the aileron connection on the receiver. So I set everything up using the gear connection on the receiver for ailerons and everything works. This is ok but now I’ve discovered there is no fail safe setting available in the transmitter menu and when I turnoff the transmitter everything stays at last instruction including the throttle.
Have I connected something wrongly or is this a software problem. I hope you can help as I bought the transmitter so that I would only need one but it seems I may have been mistaken.
Thanks for your prompt reply…I’ve tried with three receivers…AR8000, AR6210 and AR7010. I’ll let you know if I find the cause.
Problem sorted. It was because I’d used the default Module Satus. I had used channel numbers in the order they are on the receiver ie throttle on channel 1, aileron on channel 2 etc. I should have used AETR for the channel numbers ie aileron on channel 1, elevator on channel 2 etc. The failsafe is now working correctly.
2 question that have been bothering me.maybe u can help. 1st,IS it normal that i lose signal (rssi lost) when my radio is within a couple inches from plane/reciever?.it does this with differant recievers that i have bound..As soon as i pull radio away from plane, rssi recovers. 2nd,my spektrum recievers light flickers as yours did when bound.They do not do that when bound to my spektrum radio.thanx sean..
Both are normal. Remember to tune the protocol for the best reception.. Happy flying
Thx.yes I have fine tuned frequencies..
How long before you will be testing the RadioKing T18S
Check the channel. Already have..
Hello! Do you know if its possible to set throttle trim button on a 3 pos swich, max trim, trim center and min trim? I want that function to kill the Idle on my nitro plane.
All your tutorials är great! Thanks!
Already done, check out the videos in the Opentx mix school.. Happy flying
@@Painless360 thanks!
I am trying to make a rc fishing boat, what flight controller and recover do you recommend??
Check out my recent boat build to see what I used.. Best of luck
When I bind my Spektrum type receivers to my Spektrum tx I get a solid light from the rx. Would you have got a solid light if you had used the DSM "Auto" sub-protocol ?
Not sure as I don't use the AUTO setting here. Best of luck with it..
@@Painless360 just thought you should know, the flashing light on the receiver was because you had left the Tx on and the Rx thought that there had been a signal loss when it was unplugged. Most DSM Rx flash once for each time there has been a signal loss.
can redcon cm703 also bind to tx16s?
ruclips.net/video/DfKyx0yTbXU/видео.html may help
Thanks for the video Lee, Very helpful. How about binding to the spectrum AR636A receivers. I have had trouble with them and they come in there bind and fly airplanes. Thanks.
I've never had one in here so can't comment from my own experience. They use the standard protocol so I've no idea why you can't bind. They will expect a very specific channel order though.. Best of luck!
@@Painless360Unfortunately I have been having major problems binding to the AR636B reciever on my aeroscout. My TX16s has internal ELRS so I have the 4-in-1 module in the bay. It's to the point where I am wondering if the module is bad (it's new). I ended up ordering a FRSKY and an ELRS reciever just to test. Would suck to lose SAFE and AS3X, but it's better than not being able to fly the plane at all.
@@gagegrI’m having problems as well, the receiver light won’t go solid but it seems to know I’m trying to bind. It blinks rapidly about 6 times then goes off. The receiver is the ar631
@@jacobwebb6492 So I furgured this out (for my problem). In the model setup choose MULTI then DSM. I originally tried selecting DSM2 or similar to begin with instead of MULTI:DSM. Hope this helps!
Great Video !!!, please, help me to decide me to buy this Radio, Today I have my entire models flying with the international version of the Frsky DR8-II Plus old receiver, do you think this gonna work to bind these olds DR8-II Plus (D8) receivers to this RadioMaster ? , please I need help, because my old Taranis DX9 (international version) has "gone", waiting for your answers, greetings from Sweden !
Latest details for the cloning here - www.multi-module.org/using-the-module/radio-cloning Best of luck
But with spektrum not is possible receive a message when you turn off or lose signal?
Have you tried it?
@@Painless360 I tried with ar6210 without satellite. I tried with firmware lbt. you with receivers spektrum you receive RSSI?
www.multi-module.org/using-the-module/protocol-details/dsm covers it. Telemetry is supported.. Best of luck!
@@Painless360 thanks Therefore is receiver ar6210 which does not support.
you have an orange if you turn off the orange receiver on your radio Do you get a lost receiver warning?
I honestly don't know. I don't use DSM any more here.. If the radio is receiving telemetry from the receiver, it should. Best of luck!
Slightly off topic, Why is the battery? icon flashing 0%/0.0V at 1:06 - Just an observation
It depends on what battery you have the widget set to. See my video on widgets and lua scripts..
@@Painless360 Will do, Thanks
hi nice video so please i need your precious help. recently they gave me a walkera runner 250 without the tx and i tried to bind the Devo rx710 with my t18 pro but without positive results. I have selected devo protocol but nothing !!the rx does not bind. some advice ? thanks thanks in advance.
Check out my videos on the Multiprorocol module. Maybe update the module? Best of luck
@@Painless360 thank you for reply Yes multiprotocol update i have etx in my t18 jumper. rx710 devo need devo protocol true?
I've no idea what protocol it needs. I'd confirm that you have the right one.. best of luck
@@Painless360 devo rx710 = devo protocol i think ;)
Hello, I'm trying to bind a RX8R-pro receiver to TX16S and the only way I could do it is with telemetry OFF option. If I have it set to ON, at the end of the binding process I have red light on RX and green light sometimes blinks. Do you by any chance know that that is? I tried re-flashing RX with v1, v2 and v.2.1 firmware. Tx and internal module are both up to date.
@@Painless360 I have flashed Rx8Rpro with Accst 1, same result.
@@Painless360 About V2 support. As far as I know, FrSky X2 protocol supports ACCST v2, and works on my xsr radios, so that should not be an issue.
No idea. If it works on the other receivers then maybe it is something specific to that Rx. I've not got one here to test so let me know if you get it working..
@@Painless360 Thanks. I think I found the issue. Looks like it's the power supply - when telemetry is off the RX uses less power and work ok; when telemetry is on, the RX turns on the internal telemetry transmitter, uses more power and the current supply drops... Anyway, thanks for your comments!
Does this support touchscreen yet? I see so many people using the dials and nevrt the screen?
Not until it's supported in OpenTX..
@@Painless360 forgive me if I'm being stupid but I have a nv14 running open TX with a touch screen?
I'm guessing you've not seen my videos on that radio then? OpenTX does not generally support touch so it is not available on other radios. That was a 'special' to get it to work on that radio. The OpenTX interface isn't optimised for touch - yet. www.open-tx.org/radios will show you how the official support is going.. ;)
I have diffeculty's with Futaba S-FHSS. Do you have a hint?
Only time I've used that was in the E160 heli video.. Best of luck
@@Painless360 Lee I find it, fine tuning on +40 and it worked. Fantastic Radiomaster TX 16S. Altogether we solve all problems. Thank you for your support.
can the redcon DSM2 Ar6100e receiver bind to the tx16s?
I've not got one to try but if it's standard DSM then it should.. Best of luck!
@@Painless360 ok
Can this radio bind DSMX?
Yes - github.com/pascallanger/DIY-Multiprotocol-TX-Module/blob/master/Protocols_Details.md
any ideas of why i cant get the second aileron working? using open tx and a dsm2 rx
Not without a lot more detail. Depends if you are using a 'Y' cable or separate channels too. What have you tried?
@@Painless360 scratch that build i got it sorted. But! I have another wing problem this time lolsetting up a dart 250 on a crossfire micro v2 with the adapter board. Iv got ailerons working as they should and the right elevator working in harmony but the left elevator is still working as an aileron in the wrong direction. Cznt for the life of me reverse it😭
Are you using a flight controller or not?
@@Painless360 no thats my problem. First time in 10 years I think without using a flight controller . I can remember years ago it was a faf to learn how to program a second aileron. Just using a crossfire micro v2 with the breakout board and servos and esc connect to that.
ruclips.net/video/RBiNq3dWQBM/видео.html may help.. Best of luck
Esqueci de falar também
... O AFHDS2A RX não funciona tbm!!! Como RX DSM funciona e outro que funciona é o FrSky (ACCST) mas dando telemetria perdida mesmo em curta distância média e longa distância... Como DSM não tem telemetria ele não dá nenhum status
Como AFHDS2A não concluí o Bind não tenho dados de telemetria sobre perto... Média e longa distância.
Consulte o link na descrição do WIKI que lista os protocolos compatíveis. Veja minha configuração de helecóptero E160 para outro exemplo de ligação de receptor. Boa sorte
@@Painless360 show obrigado
I definitely need help. 😔
binding DSM no issue......getting the SAFE and AS3X to work properly ....no way....its either on or off.....no switching with switch
No idea, I don't use that here. Best of luck
This is just way too difficult for me.. 4hrs straight and can't set up 1 model... Ugghh
What model type quad, plane?
@@Painless360 Hey .. I finally got the Aerosout binded and surfaces matched. I have three standard type planes.
Having all sorts of problems understanding if I eed to set up TAER, RETA etc.. but by trial and error I've got one plane in, with a throttle cut.
Will look at dual rates etc , and programming the Tundra and conscendo with Flaps now.
I've come from Spektrum dx6.
Thanks - just difficult as there's no one really to actually talk to - my friend flies DJI FPV systems, and that makes the two of us that fly RC in this little town.
TAER etc. is the default channel order that is sent to the receiver and you can see that order in the MIXER screen on the radio. On a standard PWM receiver that dictates what channels come out of which PWM slot on things like FrSky (i.e. Thr = CH1, Ail = Ch2 etc.). Some systems like Spektrum have a set order (TAER) so they need and multi-protocol radios do all of the clever stuff for you to remap the channels on the radio to be the ones that the specific receiver is expecting. See ruclips.net/video/Nii4ElEbg6s/видео.html
@@Painless360 thanks so much for your time..
I have the tundra setup now but with a minor problem - no throttle !
Firstly, I wonder if I bound correctly, should I always get a dance when switching on ? Orange r620x v3.
I think it must be bound correctly as I get correct aileron, rudder, and elevator functionality.
Just no throttle.
Did I absolutely have to set to stock spektrum Taer ? As for some reason I have set to rtea. It just worked on the R636 in my aeroscout..
Not gunna let this thing beat me.. 1 full day in. Lol. Thanks.
I replied to the same question on another comment. No need to post twice - I'll reply :D Best of luck!
Hello. Do I need to re-bind transmitter every time I switch Models (in the TX16)? I only have a helicopter (physical) and Trainer model for simulators.
No. Happy flying!
Thanks. I just rebind again and it is fine. My heli is 3 blade trex 500 now and it is totally different in setup. First thing I noticed is you have to turn down cyclic gain knob on Microbeast plus to negative values. And it starts behave more stable). Maybe you have other suggestions?
@@Painless360
I've not played with a Microbeast so not sure. Best of luck!