Steep Roof? how to install roof jacks...watch !
HTML-код
- Опубликовано: 18 сен 2024
- I came across this steep roof and took this video about installing the roof jacks and the board before installing the roofing materials.
For many people out there hope this video gives you an idea how to install them.
Thank you for watching.
Eric.
Good video! You kept it simple and I am confident I can repeat it. Well done! Thank you
Great video! Taught me what I was looking for, thank you so much!!!!
I finally learned what those things are for, pretty cool. thanx for the info. good video
good video! people don't realize how much work it is until they try it.
this has been the most easily understandable, right-to-the-point video i have found on this topic. Thank you for taking the time to upload this vid :)
Thanks a lot for this very good DIY video. All your work looks top notch. Keep up the good work.
Your work looks very good!
So smart and cool! Thank you!!!
Thanks man. Sweet video helped out alot
Thank you for the response, I have never seen it before
You saved me sir.. thank you..
Thank you for you videos.
Thank you!
good video. thank you.
This video saved my life lol
Thank you so much Man!
by the way , please don't try to patch or fix a leak on single ply membrane because you won't be able to do it , you need to use the same materials and technique , Do not use roof cement ( henry) silicone ( silicone has to be compatible with this membrane.
thanks for watching
Eric.
Roofing Solutions By Eric Garcia I'm not into all that Mexican this and that. They are people just like you and I. There are many things that can be said that is more positive than that. I love the way he does his video. He showed how it is to be done and to make you you got it, he showed it to you again. Keep up the good work. Thanks for the advice on how to use the roof jacks.
Use 20d galvanized nails.
As the head is big on them
Roof jack wont move.
Do not need to put at an angle.
Man you do great work! Thanks for the videos.
gracias por la informacion se le agradece mucho...
Tha know brother tomorrow it's on and I'm ready
thanks eric
Shouldn't caulk be applied over the nails and under the shingle tab? In case the winds blow them over
Can you make a video on how to install a closed valley cut with three tab shingles?
Thanks man!
Hey bro, do you rest up? Thanks for the video.
What if shingles are on? Do I nail over shingles or try and get under them?
how does one find a rafter if underlayment is already on deck? and wouldn't putting a shingle over a roof jack (before securing first) make it not lay properly? should you install the roof jack already under a secured nailed shingle?
think you can bang on the roof for caveman method
do you still use safety belt line for these on top of the roof jacks since its high?
My favorite jacks just chuck them off the roof no damage
And a 2x10 will fit
how far apart do you install the roof jacks from each other I've seen people do one at 16" then 32" from that one and 48" from that one. your thoughts
I'm been watching your roofing videos and there very interesting. I have a questioni wanna know how to install a roof jack around a electronical service pipe?
+Xotillweoverdose559 berthag use a lead flashing and weld it ...that's the best solution
watch my video on "how to install a lead flashing"
Do you have any other videos with the TPO? Or single ply?
Why would you need someone to hold the ladder ?
hi Eric what are the best size nails to use with these roof jacks!
8D nails .make sure you hit the rafter
@@Garciasroofing thanks!
So those nails that are used to secure the roof jacks...are they going to cause leaks?????
Nope =) they are under the shingle above so water will pour right over it without ever touching the nails that were used to hold up the jacks
Carolyn Harper yes they leak unless you use tar on them...also the wind is likely to remove those shingles first in a storm. Always carry a calking gun when taking down the jacks.
As Comrade X7 says below - shingle over. And, as the man states in video, it is hot. There is a certain amount of melting among the shingles.
Most roofing is done in the summer. This may happen on occasion but come on.
What is the white membrane called on the flat roof? What is the purpose of it?
I have the same question. I bought a house with a second story deck with that material on it.
the white membrane is called Single ply ,it's a new system that came out 20 to 30 years ago, the system has changed a little bit , but the membrane is the same, it heat welded on the seams.
this time I used PVC membrane , still is a single ply , because it's a single ply membrane over a board called dens deck.
That's the stuff! Thanks!!
John Gardiner ,cap sheet membrane.
Ah you should have mention never use roofing nails on roof jacks because it too weak and the head is easily bend or break off. Always use common nails like you, which is stronger and the head is small enough to slide off the nail slots when removing the roof jacks.
Is there a solar eclipse?
The technique is right, but you didnt watch your own video, because if you did you would have realized your finger was covering the camera while you were installing your nails( while installing Jack's use hefty nails like 16d. Not just roofing nails. And it it very important that they hit rafters) .
Roof nails shooting to deep JS
Never use anything smaller than a 16p common nails on roof jacks
Hi, I’m trying to figure out at what angle you’re putting those nails in. In this video you need to let someone else hold the camera. Your hand is covering up the lens in this video. Please redo this video for all of the World to see this. I’ve talked to several people that say you shouldn’t put an angle on the nails. In your video I can’t see how you’re doing this. I know you know what you’re doing so please redo this video. Show a close up of the nails after you’ve driven them in. Zoom in on the nails. Or get a macro lens attachment for your camera. I know I’m asking a lot of you but the truth is that you’re the best at roofing so you need the right lens to show your technique. Thanks for everything. The best way to show someone how to put the roof jacks on is down on the ground where you’re not under any stress. Use a dog house or build a small example roof. This is just a suggestion. I’m say all of this because I couldn’t see on this video how you put the 3 nails in. It’s extremely hard to shoot video with one hand and nail the roof jacks. Thanks so very much for your videos. I love them.
What is denzac!?! I couldn't find it (Google)
dens deck , the white membrane is called TPO
Thanks
google flat roof membrane. There are probably different brands. I'd be cautious with it over time. And think about the weather where you live.
Can't see a damn thing with your finger in the way..also what about making the video for the guy that doesn't know how to do a closed valley using 3 tab shingle cut
Lol your hammer
Just a 2 by 4 16 penny nail all i need to tear off steep roof and to put it back amen
How to you install the 2x4 on the shingles you’ve already done without holes through them? That’s why I bought some of these jacks.
Easy 1 2 3😂
Get your finger off the lens….
Man them Mexicans can roof anything! That and brick laying, almost like it's in their blood! Good video though.
I would say this man knows his craft, and is a good teacher as well.
Yeah, it's tough work. They're the only ones willing to do it for $8 an hour. God bless them for putting hard working Americans out of a job....
You are pretty ignorant if you think South American/Latino roofers are working for 8 bucks an hour....PS "Them Mexicans" is a pretty insulting thing to call a South American/Latino worker
@@kungfoochicken08 Lazy Americans out of a job *
@@bobkn857 They're lazy because they expect to be paid more than $10 an hour to do back breaking work. I thought the left was in favor of a "living wage." I guess it's alright to subject poor people to competition from third worlders as long as it means cheap labor for the ruling class.
First 4 minutes are good (except for thumb in the way). Last 3 minutes are irrelevant.
Can you make a video on how to install a closed valley cut with three tab shingles?
Can you make a video on how to install a closed valley cut with three tab shingles?
dude