Samsung S7 death fix

Поделиться
HTML-код
  • Опубликовано: 24 дек 2024

Комментарии • 137

  • @MovilonePhoneRepair
    @MovilonePhoneRepair  4 года назад +1

    ✅ Become an EXPERT👉👉 https:movilone.eu

    • @barbararemic3001
      @barbararemic3001 2 года назад +1

      Great video! So if I understand correctly, you have resoldered the U9005 and U9010 chips? And this fixed the phone? I have a completely dead Galaxy S7 Edge. I can not access data. Samsung service guys told me the motherboard is dead but not specifically which part of the motherboard is dead. I would really like to salvage data. Do you think resoldering like you did it will fix my phone?

  • @tkogrk
    @tkogrk 4 года назад +9

    Do you fix phones? I have a same issue, a dead S7 :(

  • @JadedKiara
    @JadedKiara 3 года назад +1

    So what did they do with the parts after applying the flux? The just showed putting it on wiggling them then installing a new motherboard!?!

  • @jedics1
    @jedics1 2 года назад +2

    Ive had some kind of problem with every Samsung I ever owned, my last two were brand new S7's and they both just died randomly, one in under a year, the other in about 2....I really liked the S7, perfect size and with everything I really needed in a phone but no more money for Sammy until I die, that is my promise. I don't expect other brands to be any better but they can all be had at a fraction of the price, "flagship" priced phones are another suckers game.

  • @neddy1287
    @neddy1287 2 месяца назад

    Do you know the reason why the bluetooth range is so short is this a ic issue or amplifier issue from the phone to the headphone

  • @TenjinYoukai
    @TenjinYoukai Год назад

    Hello. Was data and configs intact after repair or did it force a reset? Thank you.

  • @entercybotron6154
    @entercybotron6154 4 года назад +23

    Can I do this in my kitchen with a knife and my wife's tweezers

    • @nicolexue0302
      @nicolexue0302 3 года назад +2

      Don't forget to use butter and heat it up with her hair-dryer

    • @hawaiisidecar
      @hawaiisidecar 2 года назад

      Are you stupid?

  • @tsvetankostoff2484
    @tsvetankostoff2484 5 лет назад +2

    Is it possible to attach the protective metal plates back to the chipset?

  • @fellogamer8674
    @fellogamer8674 4 года назад +7

    Does this mean that all the memory on the phone is going to be deleted

    • @grimmer2005
      @grimmer2005 4 года назад +1

      No, as long as its the same memory chip it will still be there

  • @qqs3odpp595
    @qqs3odpp595 2 года назад

    Hi, this is my first time using soldering iron. do I need the (hot air station)? can i use JUST the soldering iron instead of gun iron? if yes, how can I use soldering iron because it is my first time, so do i need to let the iron touch the surface or on the air to melt the Rosin Paste, and for how long? do i need to let the soldering iron heat for how long before using it?

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  2 года назад +1

      Hello,i thing you should watch all the training courses that we ve got on MovilOne RUclips channel, about microsoldering; it should help you! Best regards

    • @zetsubousan5395
      @zetsubousan5395 2 года назад +1

      @@MovilonePhoneRepair I don't have a microscope, can't I use normal soldering iron? did you change the malfunctioning ICs? and how did you apply the DC power to test the phone when the battery was removed? Thanks alot!

  • @luispereira4495
    @luispereira4495 4 года назад +1

    My s7 Edge is blocked to Vodafone is dead and won´t charge. Can i buy a unblocked motherboard on Ebay and use it??

  • @trevorjohnson7516
    @trevorjohnson7516 4 года назад

    Can I use a vacuum instead of a suction cup

  • @grimmer2005
    @grimmer2005 4 года назад +3

    Wow... so this could be it. My S7 just flat out died and dont start in any way. Completely dead.
    I just changed the battery, and it didnt solve the problem :(
    But resoldering these chips then... It will be the last try.
    My S7 died after ca 3.5 years of daily use. The screen froze while I was surfing the web, and I turned it off, after that it has never made any life signs no matter how I press the buttons.
    I have soldering skills so im gonna attempt this with my heatgun.

    • @monreja603
      @monreja603 4 года назад

      Did you fix it

    • @grimmer2005
      @grimmer2005 4 года назад

      @@monreja603 Not fixed yet. Got it back from re-soldering in an owen, but havent tried put it together since. So its yet to come

    • @mansauce5437
      @mansauce5437 4 года назад +1

      How much would a fix like thus cost ti get done ?

    • @allencraig02
      @allencraig02 2 года назад

      @@mansauce5437 How much does a soldering iron and heat gun cost in your local hardware store?

  • @blahhdelmygmailcom
    @blahhdelmygmailcom 3 года назад

    hi, i would love to get a response' from you, my s7 freezes than reboot, does this fix the problem or should i use thermal paste ?

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  3 года назад

      On some cases it s working,in many cases it is a memory problem ...

    • @blahhdelmygmailcom
      @blahhdelmygmailcom 3 года назад

      @@MovilonePhoneRepair so what do you think i should do? what procedures should i take first?
      and if it is a memory problem, what is the solution? thanks in advance

  • @m7mdxg753
    @m7mdxg753 5 лет назад +1

    What is the liquid you used 7:09?

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  5 лет назад +1

      Flux Amtech! Thanks for asking!

    • @m7mdxg753
      @m7mdxg753 5 лет назад

      @@MovilonePhoneRepair thank you so much ❤

    • @milchoyotov1811
      @milchoyotov1811 Год назад

      @@m7mdxg753 Felder Soldering 30-415005-0 Soldering grease, 50g are good for this?

  • @romeo1266
    @romeo1266 5 лет назад

    Could you take the same parts off a working USA motherboard and put it onto a UK motherboard to fix this problem, only asking as I bought a motherboard off Ebay that only works in America.

    • @allencraig02
      @allencraig02 2 года назад

      If the phone model is the same, then yes. (The phone doesn't care about voice accents!)

  • @deansimon8508
    @deansimon8508 3 года назад

    hi whats the temperature if the heat gun please ? how can you got it so easy ?

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  3 года назад +2

      90 celsius degrees. Thank you for asking! Best regards

    • @deansimon8508
      @deansimon8508 3 года назад

      @@MovilonePhoneRepair hoe much in degree like 180 ? or 220

    • @djkadakamc1889
      @djkadakamc1889 3 года назад +1

      @@MovilonePhoneRepair are you sure 90°??? In video you say 350° with 30% of air

    • @Daniel-io1ym
      @Daniel-io1ym 3 года назад +2

      @@djkadakamc1889 god damn. I used 350°c 20% as mentioned in the video

  • @SamueleGiovane-xx9it
    @SamueleGiovane-xx9it Год назад

    Internal data are safe or they are gone with the motherboard?

  • @luispereira4495
    @luispereira4495 4 года назад +2

    Lol...this might seem dumb, but can i use a hair dryer for heat??

    • @sub4no
      @sub4no 4 года назад

      I did it with a lighter... worked glue only on the edge.

    • @jm-zu7ig
      @jm-zu7ig 3 года назад

      Yes you can I did it

  • @tsvetankostoff2484
    @tsvetankostoff2484 5 лет назад +1

    Mine is dead as well and I haven't tried to repair it yet. I thought it's a battery fault, but when I opened the phone and plugged it in for charging, the motherboard is overheating in this area, but mostly in the next component to the right, next to the one, which you removed the metal cover. My phone is still covered by warranty, but I am confused what to do cause I don't want to lose my data and maybe I will attempt a repair.

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  5 лет назад

      If it is covered by the warranty, it would be advisable to take it, but if it is already open, I doubt that you will be taken care ... this samsung series has come out quite problematic...

    • @tsvetankostoff2484
      @tsvetankostoff2484 5 лет назад

      @@MovilonePhoneRepair I can purchase an adhesive and it will be fine. Still, when I asked them if it's gonna be repaired they said that they won't and if they do not manage to get it working which they will not, since it's a motherboard issue, it will be destroyed and I would get a refund or a similar class phone. It worked perfectly fine, but when I attempted fast charging , it fucked up.

    • @StoneTL
      @StoneTL 5 лет назад

      Same with me! Not this area but close to it is heating. Did you fix it?

    • @tsvetankostoff2484
      @tsvetankostoff2484 5 лет назад +1

      @@StoneTL No, I haven't tried yet. I do not live in my native country and I do not have soldering equipment yet. That component is the processor I think. Mine problem happened when I used samsung fast chargin adapter and it started fast charging since it is set up in the factory settings to attempt fast chargig when you use that type of adapter.

  • @achacxai
    @achacxai 4 года назад +1

    Hi, i have a water damaged Samsung galaxy j6 and it's motherboard is dead, is it possible to fix a dead motherboard and make it work again? Here the local repairers said that you have to change the motherboard but I know they are not that much experts. Kindly reply me with the best solution to make the same motherboard work. Thanks for the video

  • @dareyou1
    @dareyou1 4 года назад

    Temperature air station to dissassembling?

  • @ShadowTorresVideo
    @ShadowTorresVideo 4 года назад +2

    could i pay you guys to fix my phone for me ?

  • @zilonglangalamko
    @zilonglangalamko 3 года назад

    sir i have a question my board is totally damage and the technician said that he will replace it with new one i have a question there is it possible that my installed apps will be intact if i were too replace it with new one thank you i hope you'll reply :)

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  3 года назад +1

      You ll have to put your email address and you can install all the apps that you need! Best regards and thanks for asking!

    • @zilonglangalamko
      @zilonglangalamko 3 года назад

      @@MovilonePhoneRepair ah ok sir thank you very much :)

  • @entercybotron6154
    @entercybotron6154 4 года назад +1

    What the liquid that's used on the glue I've this a few time

  • @Daniel-io1ym
    @Daniel-io1ym 3 года назад

    I can't move the proccesors. It won't move even with the blower on 360°c

  • @sanjayasaliya1102
    @sanjayasaliya1102 6 лет назад +1

    What is the diagram server?

  • @moondance47
    @moondance47 5 лет назад

    I can't get any movement on the back glass after heating, the phone gets really hot and I'm worried I will damage it further.

    • @speedoflight33
      @speedoflight33 5 лет назад +4

      Johnny Mac
      Better to never use samsung again... my s7 is dead too. in this video they didn't fix anything. They just changed the motherborad (wich is very hard to find today).
      My advice : never buy any flagship again... why ???
      because these are powerhorses that needs a thermal dissipation wich the glass on the back is very harmfull and avoid cooling the motherboard !
      Better to use top mid-range and save your money next time !

    • @jm-zu7ig
      @jm-zu7ig 3 года назад

      @@speedoflight33 definitely true

    • @jamesloose3969
      @jamesloose3969 Год назад

      You need to heat the back up and then use a pry tool, blade or plastic razor blade to slide in between the edge of the case and the back. Dont try to pull the back off as you will snap it, instead push the blade inside and work it along the edge of the frame, there is a 3mm sticky seal that you are separating between the frame and the rear casing. you can push the blade into the case as far as you like and wont damage anything as the PCB is protected under covers so you wont rip any components off the board. nothing is acessable untill those covers are removed so you are safe to get stuck in there and separate the casing glue

  • @jadermartinez1089
    @jadermartinez1089 4 года назад

    How can i get my repair

  • @arnierosen7743
    @arnierosen7743 Год назад

    I dont understand how you knew it was those 2 chips that had to be done.

  • @littlelou19092009
    @littlelou19092009 4 года назад +1

    I used perfect new motherboard and still get black screen only way to fix is using heat gun but only lasts few days until needs heating again

  • @solidname9085
    @solidname9085 5 лет назад

    Which flux u use

  • @speedoflight33
    @speedoflight33 5 лет назад +6

    Better to never use samsung again... my s7 is dead too. in this video they didn't fix anything. They just changed the motherborad (wich is very hard to find today).
    My advice : never buy any flagship again... why ???
    because these are powerhorses that needs a thermal dissipation wich the glass on the back is very harmfull and avoid cooling the motherboard !
    Better to use top mid-range and save your money next time !

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  5 лет назад +3

      From nothing, we never recommend to change the motherboard; for your surprise :)we didn t change it! Thanks for watching!

    • @igronDC
      @igronDC 4 года назад

      totally agree with you. Mine gf's S7 edge just died. Now I thinking a buying A51. Hate new phones. All of this punch wholes or U V shape camera notches oh Lord. S10e battery way to weak with 3100 or 3400 for S10 and price tags $500-700 nagh. Defiantly $300 is the limit.
      Gonna do the same with flux and soldering iron. Just to recover data.

    • @henrysiegertsz8204
      @henrysiegertsz8204 4 года назад +2

      Any Idea how many millions of these phones were sold? I'd guess the reliability MTBF is approaching 100,000 hours. Your bad experience is a tiny fraction of the in service units, so no, you'd have the same chances if you had an iPhone, LG, Sony or Huawei.

  • @jazradcliffe2286
    @jazradcliffe2286 Год назад

    I have a completely dead S7 edge and a S7 (not edge) with broken screen but comes on and plays tune. Are the motherboards interchangeable? The edge screen is good.

    • @jamesloose3969
      @jamesloose3969 Год назад

      Yes, you can swap the motherboards between Samsung S7's of the same type ie Edge into an edge. I have done this several times as it is often much cheaper to get an unused S7 or a lightly used one and swap the motherboards over to save having to mess about changing the broken screen. same with the cameras, the charging port and the headphone jack.

  • @KingSlayer47
    @KingSlayer47 5 лет назад

    Where can I get this fixed

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  5 лет назад +1

      Jaime 019 , we are ubicated in Spain, so if you contact us fron nationally territory please call our center at 958179492 Best regards

  • @abgbesaq7970
    @abgbesaq7970 3 года назад +1

    thanks, my phone look got same problem, huhu, want to repair but don't have the microscope

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  3 года назад

      Hello, Abg! In this case, Just look for an especialized technical service into your area! Best regards

  • @Elite_camera_man-h7j
    @Elite_camera_man-h7j Год назад +1

    Can you please come to my house

  • @52nenne
    @52nenne 2 года назад +1

    Excellent, thank You!

  • @narosor
    @narosor 4 года назад +5

    A BIG THANKS for the great video! How did you know it is the IC (U9005, U9010) OR the USB charging port? Should I check the ICs if they are heating? I have S7 which does not start, does take 0,22A from power supply and does not show display.

    • @haxensalat
      @haxensalat 3 года назад +2

      If it takes Amps from the power supply, you should'nt care for the connector. It seems ok.

  • @zaska85
    @zaska85 Год назад

    Как обратится со своим самсунгом не включается чем поможит мне данное видео где перевод.?

  • @StoneTL
    @StoneTL 5 лет назад

    why did it help? I can't get it

    • @henrysiegertsz8204
      @henrysiegertsz8204 4 года назад +6

      The root cause was most probably dry joint in the solder due to thermal stresses.
      He added Flux and heated the area to melt and re-flow the solder between the contact pads on the circuit board and the component terminals.
      Does that answer your question?

  • @sloanessteven6867
    @sloanessteven6867 Год назад

    But my screen is frocking out

  • @luispereira4495
    @luispereira4495 3 года назад

    I dropped my phone and it bounced two or three times on the ground.
    No problem,still working.
    But that night i made a reset to factory settings and turn it Off.
    Next morning I could not turn it On anymore.
    What do you think?

  • @sendsmses
    @sendsmses 5 лет назад

    I did the same method for S7. After which the flash light keep on blinking. Any idea what happen?

    • @deltavibes7318
      @deltavibes7318 3 года назад

      @Wolf IT Solutions do you know how to fix a dead phone like this ?

  • @Elite_camera_man-h7j
    @Elite_camera_man-h7j Год назад

    To fix mine

  • @romeocantabria
    @romeocantabria Год назад

    Cuanto suele costar este tipo de reparaciones?

  • @moshazza5684
    @moshazza5684 Год назад

    hi my s7 was working fine (i did get a battery performance warning occasionally). i was watching a video on fb and it froze and went off. now wont charge or turn on. this process what is the fault:? my phone can if i fit with a new battery you think it will work or is it this fault

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  Год назад

      You need to find an especializad technical service, to work the device for you! Best regards

  • @zabdielvidal5640
    @zabdielvidal5640 6 лет назад

    Cuánto cuesta cambiarle la batería a un Alcatel T-mobile revvl

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  6 лет назад

      Hola, Zabdiel! Segun el coste del repuesto, pero...eche un vistazo por encima con los provedores con cual trabajamos a nivel nacional y no hemos encontrado el repuesto...asi que, te animamos que lo busques en Aliexpress o eBay! Un saludo cordial u gracias por preguntar

    • @zabdielvidal5640
      @zabdielvidal5640 6 лет назад

      @@MovilonePhoneRepair y cuánto me costará la mano de obra de ustedes

  • @jeffersoncrum5575
    @jeffersoncrum5575 4 года назад

    its turning on now its stuck in boot loop

    • @mashedpotatoes5323
      @mashedpotatoes5323 4 года назад

      I had the same issue with my s7 after this, I just grasped the phone with my hands and tried to twist and bend it in half. Then after I did that it booted up.

  • @cristhianelizondo6861
    @cristhianelizondo6861 6 лет назад

    Exelente trabajo

  • @dkhan9503
    @dkhan9503 4 года назад +1

    I just got a new phone

  • @sloanessteven6867
    @sloanessteven6867 Год назад +1

    I've done same and it worked thanks

    • @TenjinYoukai
      @TenjinYoukai Год назад

      Hello. Was data and configs intact after repair or did it force a reset? Thank you.

  • @cellmanf1
    @cellmanf1 5 лет назад +2

    Good video. This process worked for me and saved my samsung S7. Thank you!!!

  • @abdurrahmanm26
    @abdurrahmanm26 4 года назад

    My s7 dead did u reapire ??

  • @isshosama
    @isshosama 4 года назад +1

    I did every thing .... it didn't work 💔

    • @grimmer2005
      @grimmer2005 4 года назад

      Never got it running again?

    • @isshosama
      @isshosama 4 года назад

      @@grimmer2005 Sadly, yeah.

  • @medmlk1813
    @medmlk1813 4 года назад +2

    A VERY BIG THANKS ITS WORKING VERY FINE

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  4 года назад +1

      Nice to get by hat it works! Thanks for watching! Best regards

    • @m_ahtisham
      @m_ahtisham 4 года назад +2

      What? You actually fixed it?

  • @fouedhamri636
    @fouedhamri636 2 года назад

    Khorti

  • @MISTERKIC
    @MISTERKIC 2 года назад

    Just get a new phone

  • @broom6958
    @broom6958 3 года назад

    I used 350 degree and heated the chips up for 4 minutes. Nothing happened. Then I increased to 480 and still nothing happened. I was not able to move the chips. The solder did not seem to melt.

    • @Daniel-io1ym
      @Daniel-io1ym 3 года назад

      Same here

    • @synhro
      @synhro Год назад +2

      the temperature is in celsius.

    • @jamesloose3969
      @jamesloose3969 Год назад

      350-400 Degrees Celsius and you need the flux paste. iI you don't have flux paste then it wont work regardless of how hot you get it.
      if using an air station, 350 degrees at 25% air should do the trick.
      When using the flux paste / gel you can get no clean and stuff you have to clean off. i would recommend getting the no clean as you will need to buy the cleaner and an ultrasonic bath if its the residue stuff. if you dont clean that stuff off it will rot the board as its slightly corrosive

  • @cprteknikservis3663
    @cprteknikservis3663 3 года назад

    thanks working solution

  • @willferrel6896
    @willferrel6896 5 лет назад +2

    much better solution throw in trash and get an iPhone

    • @MovilonePhoneRepair
      @MovilonePhoneRepair  5 лет назад +3

      jjejeje, Will! We can fix it :) Best regards

    • @freedom7292
      @freedom7292 5 лет назад +2

      @@MovilonePhoneRepair My s7 keep restarting every 30 sec and i tried hard reset ,factory reset and safe mode. Nothing helps the iphons. is there any fix?

    • @henrysiegertsz8204
      @henrysiegertsz8204 4 года назад +3

      Just threw my iPhone crap in the trash and resurrected my 2015 Samsung Galaxy 4S. glad I kept it!

    • @slideuptown7857
      @slideuptown7857 4 года назад

      @@freedom7292 fucking same

    • @blahhdelmygmailcom
      @blahhdelmygmailcom 3 года назад

      @@freedom7292 any solution?

  • @Bradgilliswhammyman
    @Bradgilliswhammyman 4 года назад +4

    wouldn't it be cheaper to buy a new phone ? The equipment alone to fix this, including the microscope he is using probably costs a couple thousand dollars.

    • @grimmer2005
      @grimmer2005 4 года назад +5

      We want the pictures that are still on the phone

    • @allencraig02
      @allencraig02 2 года назад +1

      You obviously don't need the microscope (unless you're making a video) and if you don't already have a soldering iron ($40) you probably shouldn't consider making this kind of repair anyway.

  • @luispereira4495
    @luispereira4495 3 года назад

    I dropped my phone and it bounced two or three times on the ground.
    After that, everything is ok, still working!
    But that night i made a reset to factory settings and turn it Off.
    Next morning I could not turn it On anymore.
    What do you think?