Those connectors you plug easily with your tumb at @11:33 wont get plugged no matter how hard i press or alignment. How do you do it? Whats the trick with those connectors? Thanks in advance
Hi, how long did you heat it for please? I tried this just now and it didn't work. I'm not sure why. I have photos on mine if my little boy who fought cancer for 7 years. I really hope you can help me. Thank you
Hi, this is my first time using soldering iron. do I need the (hot air station)? can i use JUST the soldering iron instead of gun iron? if yes, how can I use soldering iron because it is my first time, so do i need to let the iron touch the surface or on the air to melt the Rosin Paste, and for how long? do i need to let the soldering iron heat for how long before using it?
Good job sir... Can you give me training if i want to learn how to repair all mobile brands and display changing, display problems... If its possible how i contact you
Great one.. I am using this mobile but sometime it hangs and sometime restarts by itself. What is the reason and solution of it? I have purchsed this from Saudia with Shahid app built-in and NFC options in...
First my phone powered off automatically than I take out my battery and replace it again and it powered on..... Than a few days later i powered off my phone and slept.....when i woke up at midnight...i saw my phone light blinking and then in the morning i woke up and tried to on my phone and it didn't open.... Can you give me a solution of how to open my phone......
got a s7 but it has problems battery drains real fast if i charge it full an play a game as the game is loading it turn off an goes to logo a turn off again got to put it on charger again for it to fully turn on when it on the battery is at 20% CAN YOU HELP PLEASE
Hi i subscribe on you can i ask what to do if my edge7 shorted and did not open after charged because turns overheated.dead phone only heat everytime i put on the charger. I already bought battery but logic board so expensive i cant afford😪
Thanks for subscribing. Check NPC ( non polar capacitors) by multimeter disconnecting battery from logic board. Keep Red probe on ground & black probe on NPC. If both sides gives beep sound (indicates shorted to ground) just remove it. You may replace with new NPC. If you don't get any shorted components, you need a adjustable Power supply. Set voltage of power supply at 4.2 V & ampere between 2 to 5 A. Connect probes of Power supply at battery connector. Check any current consumption. If there is any current consumption shown in Power supply, there must be a shorted component or IC. You can observe the shorted component (which obviously heating) by touching the board or putting some alcohol. Remove and replace the shorted component. Ur problem will be solved 😊
OK. Thank you. I've just done it and it didn't work for me either. I'm going g to try again and see. If not I will be so devastated as I have photos on mine of my little boy who fought cancer for 7 years 😢
Bro. If I give for repair to the shop how much money I should pay for battery not charging and sometimes it hangs. Pulse kindly reply me back. S7 edge.
My S7E died this Monday, was perfectly fine at night, black screen in the morning with blue led light steady on. Gave it to service center, they returned with led light also off. Said main board has to be changed for 18.5K. Can you try and repair this please?
I found on the button power vbatt when i plugges the charger 0.000 instead of 0.247 in diode mode. After having reflow the same way ,everything it's ok ,gob bless you . Thank you so much sir
Sir why is s7edge is shown incorrect battery percentage while charging or after some time shows wrong battery percentage, also after 58% battery doesn't increase while charging. This problem occured after I have purchased new display with touch complete.
Best video about this issue so far. Thanks a lot for sharing!
Thank you for video bro. Very detailed amazing, 👍
Best video for fixing
Mera kaam ho gaya thanx bhai
What is the creme you used for the heating on the ic's?
Thanks for the video ❤️❤️
Where is your repairing shop ?
Can you tell me what temperature to use and for how long for the reflow. Thanks
temperature is written in the video
375c, bro
Hi, did you try it on yours? Did it work please, thank you.
@@anonymousaccount1150 Tried it, but it did not work. I only used 150 degrees C
What kind of glue are you using for replacing the backcover?
T-9000 or T-7000 glue
T 7000 and E 8000 glue
@@RepairTheMobileer3*33$3e$e$e$$e3*4$r$szsr zzz, o in
Thank you Sir for your great service.
Namber please sir
Those connectors you plug easily with your tumb at @11:33 wont get plugged no matter how hard i press or alignment. How do you do it? Whats the trick with those connectors? Thanks in advance
Check for damage from the rework, possibly melted the connector?
Very nice video thanx
Which usb you use to check voltage (what usb used by powerbank please name?)
It is called USB power meter or USB ampere meter. Link fkrt.it/gaaLx8uuuN
Thanks Bro
Thoughtful video
Success 🙏
Hi, how long did you heat it for please? I tried this just now and it didn't work. I'm not sure why. I have photos on mine if my little boy who fought cancer for 7 years. I really hope you can help me. Thank you
@@anonymousaccount1150lograste hacerlo funcionar con el método?
Well done sir,great job
What kind of paste do you put on the ICs?
Amtech 559
what paste are you using please 🙏
Amtech 559
@@RepairTheMobile thank you very much 🙏 top 💪
Hi, did you try it? Did it work for you please? Thank you
Wow the best
Thanks so much for the impact does it work on galaxy s6 edge
hi bro....can we do it by just heating and cleaning with alcohol....without using the flux??
Yes, It may work.. But flux will be better for reflow.
What kind of paste, are you using?
what paste do u put bro? is it flux?
Yes Bro...
@@RepairTheMobile hi, great video. But I could I get some more info about this flux/paste, what is it exactly? I want to buy some. Thanks.
Thanks brother 😘😘
Did it work for you please?
Thank you Bai
Good job
video bermanfaat dan paling bagus
work, thanks mr
Hi, this is my first time using soldering iron. do I need the (hot air station)? can i use JUST the soldering iron instead of gun iron? if yes, how can I use soldering iron because it is my first time, so do i need to let the iron touch the surface or on the air to melt the Rosin Paste, and for how long? do i need to let the soldering iron heat for how long before using it?
it's a looong explanation, where are you from?
Thank you so much
Good job sir... Can you give me training if i want to learn how to repair all mobile brands and display changing, display problems... If its possible how i contact you
Go to school
@@spacejihadist4246 you and your family running school?
@@Sang123-19 no, go to a school who offers electronic courses.
Dear if I don't have hot air station, can I also use soldering iron?
No Bro... Need hot air station...
@@RepairTheMobile ok dear. Thank you very much for prompt response.
Why do You reflow led display ic. Does not affect charging or battery 🤨
Looks like those chips have a dry solder problem. Best to reflow them all and save potential faults down the line.
Great one..
I am using this mobile but sometime it hangs and sometime restarts by itself. What is the reason and solution of it? I have purchsed this from Saudia with Shahid app built-in and NFC options in...
Need to diagnose properly what the exact problem. As u mentioned sir, there may be problem in Power management.
siap hee
Can i ask what paste did he use??
Flux
Thanks bro
Bhi Jan mujhi Mobil bana ka do payment do ga plz plz plz reply karo sem problem ha charging Laga na pa option ata ha 🙏🙏🙏
Is the best
Did this work for you please?
The best for u
nice
First my phone powered off automatically than I take out my battery and replace it again and it powered on..... Than a few days later i powered off my phone and slept.....when i woke up at midnight...i saw my phone light blinking and then in the morning i woke up and tried to on my phone and it didn't open.... Can you give me a solution of how to open my phone......
got a s7 but it has problems battery drains real fast if i charge it full an play a game as the game is loading it turn off an goes to logo a turn off again got to put it on charger again for it to fully turn on when it on the battery is at 20% CAN YOU HELP PLEASE
Hi i subscribe on you can i ask what to do if my edge7 shorted and did not open after charged because turns overheated.dead phone only heat everytime i put on the charger. I already bought battery but logic board so expensive i cant afford😪
Thanks for subscribing. Check NPC ( non polar capacitors) by multimeter disconnecting battery from logic board. Keep Red probe on ground & black probe on NPC. If both sides gives beep sound (indicates shorted to ground) just remove it. You may replace with new NPC. If you don't get any shorted components, you need a adjustable Power supply. Set voltage of power supply at 4.2 V & ampere between 2 to 5 A. Connect probes of Power supply at battery connector. Check any current consumption. If there is any current consumption shown in Power supply, there must be a shorted component or IC. You can observe the shorted component (which obviously heating) by touching the board or putting some alcohol. Remove and replace the shorted component. Ur problem will be solved 😊
Asa kya chei lagate ho ic pe ki ic work karne lagta hai pp
Seems like this was solved in such a way that no data was lost/reset, correct?
Can we just bake the mother board in the oven with the heat sinks on?
Did you try it and did it work? Thnx
No, you can't
when plug charge, PM IC is hot, it's die?
спасибо, попробуем
Did it work for you? Thanks
@@anonymousaccount1150 I don’t remember exactly, but it seems not, it didn’t help.
OK. Thank you. I've just done it and it didn't work for me either. I'm going g to try again and see. If not I will be so devastated as I have photos on mine of my little boy who fought cancer for 7 years 😢
@@anonymousaccount1150 set up sync to the cloud, for the future, all the best, don't get sick :)
My s7edge has been done exactly the same way but it is not getting well. can you repair my phone?
Same 😢. Did you find a way to fix please?
Motherboard pe jo paste dean he uchka nam kean he
Ok that,s work
Bro. If I give for repair to the shop how much money I should pay for battery not charging and sometimes it hangs. Pulse kindly reply me back. S7 edge.
It is different from place to place. In India, it may cost from 1000 to 2500
@@RepairTheMobile T Q . Bro.
Mera kaam ho gaya thanx
tahe aya naon eta hp na matot
My S7E died this Monday, was perfectly fine at night, black screen in the morning with blue led light steady on. Gave it to service center, they returned with led light also off. Said main board has to be changed for 18.5K. Can you try and repair this please?
4:39 Trelos!
IC repair ka price kya ha
I found on the button power vbatt when i plugges the charger 0.000 instead of 0.247 in diode mode.
After having reflow the same way ,everything it's ok ,gob bless you .
Thank you so much sir
Lo intente pero no me funciono. Como lo solucionaste?
Sir merabi s7 edge off hi aap karsaktehi to aap ka address bejo
Im gonna try.this now lol lets see
Hi, did it work for you please? It didn't work for me and I'm not sure why 😢
super 1A
Hit kitna rakhna he
Sorting Kaise dheek Kaise kare
Mobile power on but auto restarting mobile
Nehi
Bhai ac ko kis cheez sa saf kiya
Alcohol isopropilico
Aap kya chij dalte ho aisi per chalu ho jata hai
My Samsung s7edge me charging to ho rahi hai but data cable accept nahi kar Raha..eska solution bata dijiye sir
Replace charging port
Same problem 😭😭😭😭 brother
my s7 edgehas same problems as yours
Samsung S7 edge mobile on Nahin ho raha hai aur charging bhi nahin ho raha hai, क्या यह ठीक हो जाएगा, डाटा डिलीट नहीं ना होगा, कितना खर्चा लगेगा
saya ada 3 S7 Edge
Mera fon charg shoq krta h lkn on ni hota m kia kron
Sir why is s7edge is shown incorrect battery percentage while charging or after some time shows wrong battery percentage, also after 58% battery doesn't increase while charging.
This problem occured after I have purchased new display with touch complete.
I came to know that display with touch complete, is not original one.
Same problem
Dis you try it please? Did it work? I just tried and it didn't work for me but I'm not sure if Iaybe needed to heat it for longer.
My S7 edge is in same condition
Untung" buntung
Namber do bro apna
I've just done all this and it didn't work 😢
What do you think I should do now please? I have so many memories on phone of my little boy who battled cancer for 7 years 😢
Sir i think my mother board is kharab ho gaya ha vo sahi ho sakti ha ya ap ek bar phone check kar lijya
Sir ji mera phone be s7 on nai ho raha
S7 This Problem
My problem not solved
Mera bhi aesa Ho gaya hai bro number please bro
Nee puliyada
Bhai mere Samsung galaxy S7 edge charging NHI ho rha
Call me plz
Number please sir
Number de do s7 edge
hello sir,it did not work
Bhai ye sabko pagal bnate h
Explain how?
15:12 đơn giản vậy hã 😂😂 15:12
bhai ap s contact ho skta h
It helps me a lot thanks 😘😘😘😘💯🫂
Sir aap ke mobile number do me Jaipur se hu
Good.. thanks teacher
Bhi Jan mujhi Mobil bana ka do payment do ga plz plz plz reply karo sem problem ha charging Laga na pa option ata ha 🙏🙏🙏
IC repair ka cost kya ha
Number please sir